Topic: RX570 GPUs installed but not recognized by miner I will give you 1 day of mining - page 2. (Read 295 times)

Updated... still no go

And there is the bad thing on trying help just for fun.

I hope he solved the issue..

^^^ This.

Get all advice you want, but allow no one access to your system, do everything yourself.

I've had this problem, usually let it sit for 3-4 minutes and if nothing happens I just hit the 's' key.  All GPU's then pop up, don't know if it'll work but might help.

You need to verify all the things related like, drivers, miner, command line, risers, psu, etc.

Your cards are STOCK? or did you biosmod?
Driver version?
What the error message?

Do not accept remote 'free' help from newbies, it smells like scam.

Good point.  Probably not enough power.  OP, try removing one of the cards as you might be able to run 4 with that PSU, but not 5.

850w PSU, is that enough power?

Add "-mode 1" to your Claymore config line.

i can help, just install temaviewer,

i have many rigs all are 570 / 580 card. much experience with settinng them up.
you can cantact me with PM

Which driver did you use?.

Contact me by directly if you want free remote help.

For ethminer: do not use the "-U" switch, that makes ethminer use CUDA which is for nvidia cards only, instead use the "-G" switch which will make ethminer use OpenCL for your AMD cards.

The error seems incomplete, kindly post the entire miner error encountered.

its normal to have a CUDA driver to be missing since you have no NVIDIA cards.

If someone can help me get this rig mining I will give you 1 day of mining. Seriously, I've spent days trying to fix this. The first person who can tell me how to fix this, I will mine for you for one day.

I built an ethereum mining rig on Windows 10 that has an H270 Pro4 mobo, 4GB Ram, 120GB SSD, 850W PS, 5 RX570's. I can't get any mining app to start mining and it is driving me crazy. The cards are all recognized by the computer (device manager and Gpu-z), but none of the miners will start mining.

Here you can see the commands I'm running for Claymore, along with the device manager and GPU-z both recognizing my cards... https://m.imgur.com/a/3ai7Xir
https://imgur.com/a/3ai7Xir
This is the full output. As you can see there is not an error reported for claymore. I looked for a verbose option but didn’t see one.

I have tried the following:

1. Claymore 11.7 - EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551 -epsw x -allpools 1
2. Ethminer 0.13.0 - ethminer.exe --farm-recheck 200 -U -S us1.ethermine.org:4444 -FS eu1.ethermine.org:4444 -O 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551.Miner1
    a. Error - No CUDA driver found
3. PhoenixMiner 2.9e - PhoenixMiner.exe -pool us1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551.Miner1 -proto 3
    a. No CUDA driver found

I (believe) I have set all required system variables, turned off microsoft features, set TOLUD to 3.5, made PciE the main graphics, changed the bus from Auto to Gen1/Gen2 and then back to Auto. I have also tried mining with only 1,2, and 3 cards (to verify it’s not a power issue).

If someone can help me get this rig mining I will give you 1 day of mining. Seriously, I've spent days trying to fix this. The first person who can tell me how to fix this I will mine for you for one day.