Topic: S17+ Socket connect failed.... (Read 134 times)

Thanks, guys. Being a noob, didnt know some miners or at least some i had took 20 mins to load up. Plus my buddy saying they were dead and CB dead and should hashup without any "editing" of pool, name, etc..........just set me off on mission, fishing for an answer.

Thanks again guys, it was ip issues and all connected....

Recently most of the big pools have had DNS issues that could affect the miner from connecting to the affected pool server but your issue is not related to your IP or pool it won't affect anything to your hashboard. If it shows only a few ASIC chips under your kernel logs it means you have an issue in the hashboard it might be a loose heatsink or cold solder joint.

Sometimes let it run for a few minutes or hours can solve this issue but if you still have that kind of issue then reflowing it with BGA hotair or replacing those chips could solve this issue.

The "Socket connect failed: Connection refused" is just a general error and doesn't always tell you what the problem might be, but in most cases and assuming there are no hardware errors -- it means what it says "Connection refused" which is obviously a pool-related problem and some times just a general network issue like "no internet , router is blocking your connection to the pool and what no".

It's always important to fill at least 2 pools in the setting page just in case while you are testing the main pool is down, or something is wrong with your worker details, I personally like to use CKsolo as my backup pool or primary when troubleshooting a miner, it requires no login, accounts or any of that.

URL : stratum+tcp://solo.ckpool.org:3333
USER: Any valid BTC address
PASS: x

And then to be extra sure, go to the diagnostic page of the miner under the network tab and ping one of the known websites to make sure that your miner has access to the internet, once you do that you almost completely eliminate the network/pool issues so you can focus on the actual potential problem.

What happened with your miner is either you left a leading or trailing space in one of the worker/URL fields or your worker wasn't activated on the pool, the second possibility is an actual hardware damage, which is also pretty normal for all the 17 series, the miner can work at times and fail the next second.

No need for tips, you'd have better luck if you posted in the correct forum, this should go in the Support forum. Maybe a mod will move it?

Also, use the "Insert Code" tag when posting logs so they don't take up so much space ( the # button).

Occasionally not getting the full asic count and/or getting temperature sensor errors is normally a sign that there are problems that will tend to just get worse until the board no longer comes up at all. Those are normally caused by poor solder contacts.

Also, the boards that were damaged that lost heat sinks will probably require new asic chips. I have found that most of the time the copper plating comes off with the heat sink, making it impossible to re-attach correctly. People have discussed re-attaching using thermal adhesives, but I'm skeptical if it would work, especially long term.

See this thread for more info: https://bitcointalksearch.org/topic/t17s17-malfunction-cases-solutions-remedies-rma-history-5217949

Well got the t17+ to work. not sure exactly how, but thinking some type of ip error, pool error on my side.

i tried to same thing with s17+ miner. Made an new worker "luxor pool"  obviously im a noob.... It didnt work at 1st, then I also got the s17+ to see hashboard and hash.

Here is the working kernel, from s17+ if anyone could or wants to explain what happen? My btc guy said just hook miners up and they should hash right out box, with out changing any settings at all, and was adamant that CB and or hashboards were damaged..... I said it could be ip problem but i only ever worked on pcs. Maybe i just didnt wait long enough for my new settings to kick in?  

And im willing to "tip" for anyone that wants to waste their time helping me understand.....thanks...



CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc:

• 0
• 1

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
   Build-time adjustment of leaf fanout to 32.
   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1567270514
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 47B540C7-9D9A-47A8-BA37-D4081EFEDE2D, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2131/560, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
2021-12-03 10:26:10 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2021-12-03 10:26:10 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version     = 1
2021-12-03 10:26:10 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab        = 1
2021-12-03 10:26:10 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-12-03 10:26:10 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun  2 10:31:07 CST 2020 type: Antminer S17+
2021-12-03 10:26:10 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2021-12-03 10:26:10 driver-btm-api.c:2083:show_sn: len:16, 8074f44679104814
2021-12-03 10:26:10 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2021-12-03 10:26:10 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2021-12-03 10:26:10 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8074f44679104814
2021-12-03 10:26:10 fan.c:284:front_fan_power_on: Note: front fan is power on!
2021-12-03 10:26:10 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2021-12-03 10:26:10 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2021-12-03 10:26:10 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-12-03 10:26:16 driver-btm-api.c:1239:init_miner_version: miner ID : 8074f44679104814
2021-12-03 10:26:16 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-12-03 10:26:20 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2021-12-03 10:26:20 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2021-12-03 10:26:20 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2021-12-03 10:26:20 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2021-12-03 10:26:20 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2021-12-03 10:26:20 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2021-12-03 10:26:20 thread.c:1363:create_read_nonce_reg_thread: create thread
2021-12-03 10:26:26 driver-btm-api.c:1239:init_miner_version: miner ID : 8074f44679104814
2021-12-03 10:26:26 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-12-03 10:26:29 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2021-12-03 10:26:29 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2021-12-03 10:26:29 driver-btm-api.c:792:_set_project_type: project:0
2021-12-03 10:26:29 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2021-12-03 10:26:29 driver-btm-api.c:824:dump_pcb_bom_version: Chain

• PCB Version: 0x0100

2021-12-03 10:26:29 driver-btm-api.c:825:dump_pcb_bom_version: Chain

• BOM Version: 0x0100

2021-12-03 10:26:29 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-12-03 10:26:29 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-12-03 10:26:29 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2021-12-03 10:26:30 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-12-03 10:26:32 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2021-12-03 10:26:34 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-12-03 10:26:36 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-12-03 10:26:36 thread.c:1358:create_pic_heart_beat_thread: create thread
2021-12-03 10:26:36 power_api.c:213:power_init: Power init:
2021-12-03 10:26:36 power_api.c:214:power_init: current_voltage_raw = 0
2021-12-03 10:26:36 power_api.c:215:power_init: highest_voltage_raw = 2100
2021-12-03 10:26:36 power_api.c:216:power_init: working_voltage_raw = 1950
2021-12-03 10:26:36 power_api.c:217:power_init: higher_voltage_raw  = 2040
2021-12-03 10:26:36 power_api.c:218:power_init: check_asic_voltage_raw  = 2100
2021-12-03 10:26:36 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-12-03 10:27:08 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-12-03 10:27:33 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:27:34 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.143219
2021-12-03 10:27:35 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.215463
2021-12-03 10:27:35 power_api.c:53:_get_avg_voltage: average_voltage = 21.179341
2021-12-03 10:27:35 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.18, check voltage passed.
2021-12-03 10:27:35 uart.c:72:set_baud: set fpga_baud to 115200
2021-12-03 10:27:47 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2021-12-03 10:27:57 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 63 asic, times 0
2021-12-03 10:28:08 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 63 asic, times 1
2021-12-03 10:28:19 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 63 asic, times 2
2021-12-03 10:28:19 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-12-03 10:28:28 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 63 asic, times 3
2021-12-03 10:28:28 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2050
2021-12-03 10:28:28 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2021-12-03 10:28:32 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:28:34 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.611391
2021-12-03 10:28:35 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.635442
2021-12-03 10:28:35 power_api.c:53:_get_avg_voltage: average_voltage = 20.623416
2021-12-03 10:28:35 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.62, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-12-03 10:28:44 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 63 asic, times 4
2021-12-03 10:28:44 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2021-12-03 10:28:44 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-12-03 10:28:47 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:28:49 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.106328
2021-12-03 10:28:50 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.154429
2021-12-03 10:28:50 power_api.c:53:_get_avg_voltage: average_voltage = 20.130379
2021-12-03 10:28:50 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.13, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-12-03 10:28:59 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 63 asic, times 5
2021-12-03 10:28:59 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2021-12-03 10:28:59 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-12-03 10:29:04 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:29:06 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.092404
2021-12-03 10:29:07 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.140505
2021-12-03 10:29:07 power_api.c:53:_get_avg_voltage: average_voltage = 21.116454
2021-12-03 10:29:07 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.12, check voltage passed.
2021-12-03 10:29:07 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 63 asic, will power off hash board 1
2021-12-03 10:29:08 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.825806, an2 2.835484, an6 2.548387.
2021-12-03 10:29:12 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2021-12-03 10:29:12 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2021-12-03 10:29:13 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2021-12-03 10:29:13 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2021-12-03 10:29:16 register.c:1572:quick_dump_core_hash_clock_counter: bad clock counter. chain = 0, asic = 9, core = 0, found 0, clock counter 0x00000000
2021-12-03 10:29:16 driver-btm-api.c:2404:bitmain_board_init: clock counter status was not good. Try reset.
2021-12-03 10:29:16 voltage[0] = 1920
2021-12-03 10:29:16 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1920
2021-12-03 10:29:17 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2021-12-03 10:29:17 uart.c:72:set_baud: set fpga_baud to 12000000
2021-12-03 10:29:17 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 26
2021-12-03 10:29:17 thread.c:1378:create_check_miner_status_thread: create thread
2021-12-03 10:29:17 thread.c:1368:create_show_miner_status_thread: create thread
2021-12-03 10:29:17 thread.c:1348:create_temperature_monitor_thread: create thread
2021-12-03 10:29:17 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 26 dec_freq_index=0
2021-12-03 10:29:17 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2021-12-03 10:29:17 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2021-12-03 10:29:17 thread.c:1338:create_asic_status_monitor_thread: create thread
2021-12-03 10:29:17 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 600, is_higher_voltage = true
2021-12-03 10:29:29 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2021-12-03 10:29:31 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:29:32 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.996201
2021-12-03 10:29:32 power_api.c:53:_get_avg_voltage: average_voltage = 20.996201
2021-12-03 10:29:32 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.00, check voltage passed.
2021-12-03 10:29:41 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-12-03 10:29:43 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:29:44 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.092404
2021-12-03 10:29:44 power_api.c:53:_get_avg_voltage: average_voltage = 21.092404
2021-12-03 10:29:44 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.09, check voltage passed.
2021-12-03 10:29:49 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2021-12-03 10:29:50 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:29:51 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.972151
2021-12-03 10:29:51 power_api.c:53:_get_avg_voltage: average_voltage = 20.972151
2021-12-03 10:29:51 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.97, check voltage passed.
2021-12-03 10:34:07 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
2021-12-03 10:34:09 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:34:10 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.854246
2021-12-03 10:34:10 power_api.c:53:_get_avg_voltage: average_voltage = 20.854246
2021-12-03 10:34:10 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.85, check voltage passed.
2021-12-03 10:36:59 driver-btm-api.c:765:set_timeout: freq = 600, percent = 90, hcn = 44236, timeout = 73
2021-12-03 10:36:59 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1920, step by step.
2021-12-03 10:37:06 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 10:37:07 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.288606
2021-12-03 10:37:07 power_api.c:53:_get_avg_voltage: average_voltage = 19.288606
2021-12-03 10:37:07 power_api.c:71:check_voltage: target_vol = 19.20, actural_vol = 19.29, check voltage passed.
2021-12-03 10:37:07 thread.c:1373:create_check_system_status_thread: create thread
2021-12-03 10:37:07 driver-btm-api.c:2618:bitmain_soc_init: Init done!
2021-12-03 10:37:07 driver-btm-api.c:222:set_miner_status: STATUS_INIT
2021-12-03 10:37:12 driver-btm-api.c:222:set_miner_status: STATUS_OKAY
2021-12-03 10:37:13 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 25552
2021-12-03 10:37:13 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 25000
2021-12-03 10:37:17 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4.
2021-12-03 10:37:17 driver-btm-api.c:1644:dhash_chip_send_job: stime.tv_sec 1638527837, block_ntime 1638527799

I updated the kernel logs after running...

What i did notice is on s17+, hash boards still good?

2021-12-03 07:51:50 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2021-12-03 07:52:01 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0

and the t17+
2021-12-03 05:07:11 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0

Hello, i had 2 miners hash boards damaged in shipping, i removed those and tried to connect to the miner and I only get socket connection failure on the other hash boards on both machines, just blank...

I'm pasting the kernels of both miners, T17+ and S17+, hoping someone could help.

Thanks.



S17+





System
Miner Configuration
Miner Status
Network

Overview
Administration
Monitor
Kernel Log
Upgrade
Reboot
Locate

Kernel Log


Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc:

• 0
• 1

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
   Build-time adjustment of leaf fanout to 32.
   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 1567270514
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 47B540C7-9D9A-47A8-BA37-D4081EFEDE2D, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2131/560, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-12-03 07:50:09 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2021-12-03 07:50:09 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version     = 1
2021-12-03 07:50:09 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab        = 1
2021-12-03 07:50:09 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-12-03 07:50:09 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun  2 10:31:07 CST 2020 type: Antminer S17+
2021-12-03 07:50:09 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2021-12-03 07:50:09 driver-btm-api.c:2083:show_sn: len:16, 8074f44679104814
2021-12-03 07:50:09 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2021-12-03 07:50:09 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2021-12-03 07:50:09 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8074f44679104814
2021-12-03 07:50:09 fan.c:284:front_fan_power_on: Note: front fan is power on!
2021-12-03 07:50:09 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2021-12-03 07:50:09 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2021-12-03 07:50:09 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-12-03 07:50:15 driver-btm-api.c:1239:init_miner_version: miner ID : 8074f44679104814
2021-12-03 07:50:15 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-12-03 07:50:19 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2021-12-03 07:50:19 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2021-12-03 07:50:19 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2021-12-03 07:50:19 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2021-12-03 07:50:19 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2021-12-03 07:50:19 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2021-12-03 07:50:19 thread.c:1363:create_read_nonce_reg_thread: create thread
2021-12-03 07:50:25 driver-btm-api.c:1239:init_miner_version: miner ID : 8074f44679104814
2021-12-03 07:50:25 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-12-03 07:50:29 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2021-12-03 07:50:29 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2021-12-03 07:50:29 driver-btm-api.c:792:_set_project_type: project:0
2021-12-03 07:50:29 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2021-12-03 07:50:29 driver-btm-api.c:824:dump_pcb_bom_version: Chain

• PCB Version: 0x0100

2021-12-03 07:50:29 driver-btm-api.c:825:dump_pcb_bom_version: Chain

• BOM Version: 0x0100

2021-12-03 07:50:29 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-12-03 07:50:29 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-12-03 07:50:33 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2021-12-03 07:50:34 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-12-03 07:50:36 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2021-12-03 07:50:37 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-12-03 07:50:39 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-12-03 07:50:39 thread.c:1358:create_pic_heart_beat_thread: create thread
2021-12-03 07:50:39 power_api.c:213:power_init: Power init:
2021-12-03 07:50:39 power_api.c:214:power_init: current_voltage_raw = 0
2021-12-03 07:50:39 power_api.c:215:power_init: highest_voltage_raw = 2100
2021-12-03 07:50:39 power_api.c:216:power_init: working_voltage_raw = 1950
2021-12-03 07:50:39 power_api.c:217:power_init: higher_voltage_raw  = 2040
2021-12-03 07:50:39 power_api.c:218:power_init: check_asic_voltage_raw  = 2100
2021-12-03 07:50:39 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-12-03 07:50:39 power_api.c:186:power_off: init gpio907
2021-12-03 07:51:11 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-12-03 07:51:37 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 07:51:38 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.143219
2021-12-03 07:51:39 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.191382
2021-12-03 07:51:39 power_api.c:53:_get_avg_voltage: average_voltage = 21.167301
2021-12-03 07:51:39 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.17, check voltage passed.
2021-12-03 07:51:39 uart.c:72:set_baud: set fpga_baud to 115200
2021-12-03 07:51:50 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2021-12-03 07:52:01 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2021-12-03 07:52:06 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2021-12-03 07:52:06 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2021-12-03 07:52:07 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3
2021-12-03 07:52:07 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2021-12-03 07:52:07 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2021-12-03 07:52:07 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:07 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:07 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:07 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:08 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:10 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:10 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:10 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 21
2021-12-03 07:52:10 register.c:1572:quick_dump_core_hash_clock_counter: bad clock counter. chain = 0, asic = 9, core = 0, found 0, clock counter 0x00000000
2021-12-03 07:52:10 driver-btm-api.c:2404:bitmain_board_init: clock counter status was not good. Try reset.
2021-12-03 07:52:10 voltage[0] = 1920
2021-12-03 07:52:10 voltage[1] = 1920
2021-12-03 07:52:10 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1920
2021-12-03 07:52:11 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2021-12-03 07:52:12 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2021-12-03 07:52:12 uart.c:72:set_baud: set fpga_baud to 12000000
2021-12-03 07:52:13 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 25
2021-12-03 07:52:13 thread.c:1378:create_check_miner_status_thread: create thread
2021-12-03 07:52:13 thread.c:1368:create_show_miner_status_thread: create thread
2021-12-03 07:52:13 thread.c:1348:create_temperature_monitor_thread: create thread
2021-12-03 07:52:13 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 25 dec_freq_index=0
2021-12-03 07:52:13 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2021-12-03 07:52:13 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2021-12-03 07:52:13 thread.c:1338:create_asic_status_monitor_thread: create thread
2021-12-03 07:52:13 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 600, is_higher_voltage = true
2021-12-03 07:52:16 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 64, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oooox ooooo
2021-12-03 07:52:17 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2021-12-03 07:52:23 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 63, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxooo ooooo ooooo oooox ooooo
2021-12-03 07:52:24 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2021-12-03 07:52:25 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 64, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxooo ooooo ooooo ooooo ooooo
2021-12-03 07:52:26 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2021-12-03 07:52:27 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 64, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oooxo ooooo ooooo ooooo ooooo
2021-12-03 07:52:29 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2021-12-03 07:52:29 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 64, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooxoo
2021-12-03 07:52:31 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2021-12-03 07:52:34 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2021-12-03 07:52:36 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 07:52:38 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.972151
2021-12-03 07:52:39 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.020252
2021-12-03 07:52:39 power_api.c:53:_get_avg_voltage: average_voltage = 20.996201
2021-12-03 07:52:39 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.00, check voltage passed.
2021-12-03 07:56:59 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2030, step by step.
2021-12-03 07:57:02 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 07:57:03 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.370885
2021-12-03 07:57:04 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.394935
2021-12-03 07:57:04 power_api.c:53:_get_avg_voltage: average_voltage = 20.382910
2021-12-03 07:57:04 power_api.c:71:check_voltage: target_vol = 20.30, actural_vol = 20.38, check voltage passed.
2021-12-03 07:57:43 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 0
2021-12-03 07:57:43 thread.c:1273:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 49, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oooox xxxxx xxxxx xxxxx
2021-12-03 07:57:44 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2021-12-03 07:57:44 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 0
2021-12-03 07:57:44 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2021-12-03 07:57:45 thread.c:1293:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 0 times.
2021-12-03 07:57:45 thread.c:1273:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 49, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oooox xxxxx xxxxx xxxxx
2021-12-03 07:57:46 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 0
2021-12-03 07:57:47 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2021-12-03 07:57:47 thread.c:1293:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 1 times.
2021-12-03 07:57:47 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 0
2021-12-03 07:57:47 thread.c:1273:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 49, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oooox xxxxx xxxxx xxxxx
2021-12-03 07:57:47 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2021-12-03 07:57:49 thread.c:1293:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 2 times.
2021-12-03 07:57:49 thread.c:1273:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 49, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oooox xxxxx xxxxx xxxxx
2021-12-03 07:57:49 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 0
2021-12-03 07:57:50 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2021-12-03 07:57:50 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 0
2021-12-03 07:57:50 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2021-12-03 07:57:51 thread.c:1293:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 3 times.
2021-12-03 07:57:51 thread.c:1273:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 49, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oooox xxxxx xxxxx xxxxx
2021-12-03 07:57:52 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 0
2021-12-03 07:57:53 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
2021-12-03 07:57:53 thread.c:1293:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 4 times.
2021-12-03 07:57:53 thread.c:1297:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 5 times, power off.
2021-12-03 07:57:53 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 0
2021-12-03 07:57:54 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
2021-12-03 07:59:53 driver-btm-api.c:765:set_timeout: freq = 600, percent = 90, hcn = 44236, timeout = 73
2021-12-03 07:59:53 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1920, step by step.
2021-12-03 07:59:59 power_api.c:85:check_voltage_multi: retry time: 0
2021-12-03 08:00:00 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.288606
2021-12-03 08:00:00 power_api.c:53:_get_avg_voltage: average_voltage = 19.288606
2021-12-03 08:00:00 power_api.c:71:check_voltage: target_vol = 19.20, actural_vol = 19.29, check voltage passed.
2021-12-03 08:00:00 thread.c:1373:create_check_system_status_thread: create thread
2021-12-03 08:00:00 driver-btm-api.c:2618:bitmain_soc_init: Init done!
2021-12-03 08:00:00 driver-btm-api.c:222:set_miner_status: STATUS_INIT
2021-12-03 08:00:05 driver-btm-api.c:222:set_miner_status: STATUS_OKAY
2021-12-03 08:00:06 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 25552
2021-12-03 08:00:06 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 25000

Copyright © 2013-2014, Bitmain Technologies




T17+.....updated after 15mins running.



Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc:

• 0
• 1

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203436K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25940K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
   Build-time adjustment of leaf fanout to 32.
   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12900K (cce67000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 15/7, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1036/230, WL threshold: 4096, image sequence number: 914180297
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-12-03 05:05:48 driver-btm-api.c:723:init_freq_mode: This is scan-user version
2021-12-03 05:05:48 driver-btm-api.c:2514:bitmain_soc_init: opt_multi_version     = 1
2021-12-03 05:05:48 driver-btm-api.c:2515:bitmain_soc_init: opt_bitmain_ab        = 1
2021-12-03 05:05:48 driver-btm-api.c:2516:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-12-03 05:05:48 driver-btm-api.c:2517:bitmain_soc_init: Miner compile time: Wed Apr  8 11:27:07 CST 2020 type: Antminer T17+
2021-12-03 05:05:48 driver-btm-api.c:2518:bitmain_soc_init: commit version: fc44955 2020-04-08 11:23:26, build by: lol 2020-04-08 11:32:55
2021-12-03 05:05:48 driver-btm-api.c:2141:show_sn: 80548dc67510481c<7
2021-12-03 05:05:48 driver-btm-api.c:2198:handle_sn_for_factory_mode: read sn success, 80548dc67510481c<7
2021-12-03 05:05:48 fan.c:258:front_fan_power_on: Note: front fan is power on!
2021-12-03 05:05:48 fan.c:268:rear_fan_power_on: Note: rear fan is power on!
2021-12-03 05:05:48 driver-btm-api.c:1318:miner_device_init: Detect 256MB control board of XILINX
2021-12-03 05:05:48 driver-btm-api.c:1259:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-12-03 05:05:54 driver-btm-api.c:1242:init_miner_version: miner ID : 80548dc67510481c
2021-12-03 05:05:54 driver-btm-api.c:1248:init_miner_version: FPGA Version = 0xB023
2021-12-03 05:05:56 driver-btm-api.c:775:get_product_id: product_id[0] = 0
2021-12-03 05:05:56 driver-btm-api.c:806:get_chip_version: chip_version[0] = 1
2021-12-03 05:05:56 driver-btm-api.c:2254:update_conf_by_power_feedback: Power feedback is disabled
2021-12-03 05:05:56 driver-btm-api.c:2222:get_calibration_voltage: calibration voltage flag is error data.
2021-12-03 05:05:56 driver-btm-api.c:2288:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2021-12-03 05:05:56 frequency.c:1290:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 19964, index = 0, adjust_vol = 30
2021-12-03 05:05:56 thread.c:1166:create_read_nonce_reg_thread: create thread
2021-12-03 05:06:02 driver-btm-api.c:1242:init_miner_version: miner ID : 80548dc67510481c
2021-12-03 05:06:02 driver-btm-api.c:1248:init_miner_version: FPGA Version = 0xB023
2021-12-03 05:06:04 driver-btm-api.c:775:get_product_id: product_id[0] = 0
2021-12-03 05:06:04 driver-btm-api.c:806:get_chip_version: chip_version[0] = 1
2021-12-03 05:06:04 driver-btm-api.c:1905:get_ccdly_opt: ccdly_opt[0] = 0
2021-12-03 05:06:04 driver-btm-api.c:2400:bitmain_board_init: g_ccdly_opt = 0
2021-12-03 05:06:04 driver-btm-api.c:736:_set_project_type: project:0, set to T17Plus always
2021-12-03 05:06:04 driver-btm-api.c:751:_set_project_type: Project type: Antminer T17+
2021-12-03 05:06:04 driver-btm-api.c:762:dump_pcb_bom_version: Chain

• PCB Version: 0x0100

2021-12-03 05:06:04 driver-btm-api.c:763:dump_pcb_bom_version: Chain

• BOM Version: 0x0100

2021-12-03 05:06:06 driver-btm-api.c:2422:bitmain_board_init: Fan check passed.
2021-12-03 05:06:07 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-12-03 05:06:09 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2021-12-03 05:06:09 thread.c:1161:create_pic_heart_beat_thread: create thread
2021-12-03 05:06:10 power_api.c:231:power_init: power type version: 0x0042
2021-12-03 05:06:10 power_api.c:249:power_init: Power init:
2021-12-03 05:06:10 power_api.c:250:power_init: current_voltage_raw = 0
2021-12-03 05:06:10 power_api.c:251:power_init: highest_voltage_raw = 1950
2021-12-03 05:06:10 power_api.c:252:power_init: working_voltage_raw = 1900
2021-12-03 05:06:10 power_api.c:253:power_init: higher_voltage_raw  = 1930
2021-12-03 05:06:10 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2021-12-03 05:06:10 driver-btm-api.c:2432:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-12-03 05:06:10 power_api.c:221:power_off: set gpio907 to 1
2021-12-03 05:06:41 power_api.c:206:power_on: set gpio907 to 0
2021-12-03 05:06:42 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2021-12-03 05:06:59 power_api.c:120:check_voltage_multi: retry time: 0
2021-12-03 05:07:00 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2021-12-03 05:07:00 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.481622, an2 18.590621, an6 2.500000.
2021-12-03 05:07:00 power_api.c:85:_get_avg_voltage: average_voltage = 18.590621
2021-12-03 05:07:00 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.59, check voltage passed.
2021-12-03 05:07:02 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2021-12-03 05:07:02 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.481622, an2 18.590621, an6 2.500000.
2021-12-03 05:07:02 power_api.c:85:_get_avg_voltage: average_voltage = 18.590621
2021-12-03 05:07:02 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.59, check voltage passed.
2021-12-03 05:07:02 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-12-03 05:07:11 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2021-12-03 05:07:13 driver-btm-api.c:386:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2021-12-03 05:07:13 driver-btm-api.c:1892:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0
2021-12-03 05:07:13 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2021-12-03 05:07:13 driver-btm-api.c:1933:check_clock_counter: freq 50 clock_counter_limit 6
2021-12-03 05:07:21 voltage[0] = 1800
2021-12-03 05:07:21 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1800
2021-12-03 05:07:22 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. TMP451
2021-12-03 05:07:22 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2021-12-03 05:07:23 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 26
2021-12-03 05:07:23 thread.c:1181:create_check_miner_status_thread: create thread
2021-12-03 05:07:23 thread.c:1171:create_set_miner_status_thread: create thread
2021-12-03 05:07:23 driver-btm-api.c:673:calculate_timeout: dev->timeout = 245
2021-12-03 05:07:23 thread.c:1151:create_temperature_monitor_thread: create thread
2021-12-03 05:07:23 frequency.c:486:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 26 dec_freq_index=2
2021-12-03 05:07:23 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790
2021-12-03 05:07:23 driver-btm-api.c:1763:send_null_work: [DEBUG] Send null work.
2021-12-03 05:07:23 thread.c:1141:create_asic_status_monitor_thread: create thread
2021-12-03 05:07:23 frequency.c:1095:inc_freq_with_fixed_vco: chain = 255, freq = 665, is_higher_voltage = true
2021-12-03 05:07:23 frequency.c:1111:inc_freq_with_fixed_vco:

• _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 54

2021-12-03 05:07:23 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1870, step by step.
2021-12-03 05:07:39 power_api.c:120:check_voltage_multi: retry time: 0
2021-12-03 05:07:40 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2021-12-03 05:07:40 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.663292, an2 18.735444, an6 2.500000.
2021-12-03 05:07:40 power_api.c:85:_get_avg_voltage: average_voltage = 18.735444
2021-12-03 05:07:40 power_api.c:106:check_voltage: target_vol = 18.70, actural_vol = 18.74, check voltage passed.
2021-12-03 05:07:42 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2021-12-03 05:07:42 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.663292, an2 18.759495, an6 2.500000.
2021-12-03 05:07:42 power_api.c:85:_get_avg_voltage: average_voltage = 18.759495
2021-12-03 05:07:42 power_api.c:106:check_voltage: target_vol = 18.70, actural_vol = 18.76, check voltage passed.
2021-12-03 05:07:43 frequency.c:1111:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 63
2021-12-03 05:07:44 frequency.c:1111:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 73
2021-12-03 05:07:45 frequency.c:1111:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 76
2021-12-03 05:07:46 frequency.c:1111:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 88
2021-12-03 05:07:47 frequency.c:1111:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 95
2021-12-03 05:07:48 frequency.c:1111:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 106
2021-12-03 05:07:49 frequency.c:1111:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 110
2021-12-03 05:07:50 frequency.c:1111:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 126
2021-12-03 05:07:51 frequency.c:1111:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 133
2021-12-03 05:07:52 frequency.c:1111:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 147
2021-12-03 05:07:53 frequency.c:1111:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 166
2021-12-03 05:07:54 frequency.c:1111:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 177
2021-12-03 05:07:54 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2021-12-03 05:08:10 power_api.c:120:check_voltage_multi: retry time: 0
2021-12-03 05:08:11 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2021-12-03 05:08:11 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.470887, an2 18.543039, an6 2.500000.
2021-12-03 05:08:11 power_api.c:85:_get_avg_voltage: average_voltage = 18.543039
2021-12-03 05:08:11 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.54, check voltage passed.
2021-12-03 05:08:13 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2021-12-03 05:08:13 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.494297, an2 18.590621, an6 2.500000.
2021-12-03 05:08:13 power_api.c:85:_get_avg_voltage: average_voltage = 18.590621
2021-12-03 05:08:13 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.59, check voltage passed.
2021-12-03 05:08:14 frequency.c:1111:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 190
2021-12-03 05:08:15 frequency.c:1111:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 221
2021-12-03 05:08:16 frequency.c:1111:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 221
2021-12-03 05:08:17 frequency.c:1111:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 266
2021-12-03 05:08:18 frequency.c:1111:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 332
2021-12-03 05:08:20 frequency.c:1111:inc_freq_with_fixed_vco: [18] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 380
2021-12-03 05:08:21 frequency.c:1111:inc_freq_with_fixed_vco: [19] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 443
2021-12-03 05:08:22 frequency.c:1111:inc_freq_with_fixed_vco: [20] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 532
2021-12-03 05:08:24 frequency.c:1111:inc_freq_with_fixed_vco: [21] _POSTDIV1 = 4, _POSTDIV2 = 1, USER_DIV = 1, freq = 665
2021-12-03 05:08:24 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1820, step by step.
2021-12-03 05:08:40 power_api.c:120:check_voltage_multi: retry time: 0
2021-12-03 05:08:41 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2021-12-03 05:08:41 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.134178, an2 18.230381, an6 2.500000.
2021-12-03 05:08:41 power_api.c:85:_get_avg_voltage: average_voltage = 18.230381
2021-12-03 05:08:41 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.23, check voltage passed.
2021-12-03 05:08:43 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2021-12-03 05:08:43 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.134178, an2 18.230381, an6 2.500000.
2021-12-03 05:08:43 power_api.c:85:_get_avg_voltage: average_voltage = 18.230381
2021-12-03 05:08:43 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.23, check voltage passed.
2021-12-03 05:08:46 frequency.c:963:inc_asic_diff_freq_by_steps: chain = 0, start = 665, freq_step = 5
2021-12-03 05:08:48 driver-btm-api.c:704:set_timeout: freq 680 final timeout=108
2021-12-03 05:08:48 power_api.c:346:set_to_working_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-12-03 05:09:05 power_api.c:120:check_voltage_multi: retry time: 0
2021-12-03 05:09:06 power_api.c:56:_get_avg_voltage: an6 raw = 2.551613, factor = 1.020645
2021-12-03 05:09:06 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.919090, an2 18.015171, an6 2.500000.
2021-12-03 05:09:06 power_api.c:85:_get_avg_voltage: average_voltage = 18.015171
2021-12-03 05:09:06 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 18.02, check voltage passed.
2021-12-03 05:09:08 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2021-12-03 05:09:08 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.917723, an2 18.037976, an6 2.500000.
2021-12-03 05:09:08 power_api.c:85:_get_avg_voltage: average_voltage = 18.037976
2021-12-03 05:09:08 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 18.04, check voltage passed.
2021-12-03 05:09:08 thread.c:1176:create_check_system_status_thread: create thread
2021-12-03 05:09:08 driver-btm-api.c:2719:bitmain_soc_init: Init done!
2021-12-03 05:09:08 driver-btm-api.c:216:set_miner_status: STATUS_INIT
2021-12-03 05:09:13 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
2021-12-03 05:09:14 frequency.c:306:get_sale_hash_rate_GH: g_sale_hash_rate = 16704