Bitcoin Forum>Bitcoin>Mining>Mining support
Pages:
Author

Topic: T17/S17 malfunction: cases, solutions, remedies, RMA history (Read 6906 times)

wndsnb
hero member
Activity: 544
Merit: 589
T17/S17 malfunction: cases, solutions, remedies, RMA history
June 26, 2022, 10:49:18 AM
#426
The voltage setting stored in the eeproms (for the current mode if a s17) needs to be the same on all hashboards in a miner for stock firmware to work. If you have logs from the miners with the boards you want to mix, you can tell in advance if they will work together. You just need to find the following section in the logs and check that the voltage setting is the same in the two miners you want to mix and match boards from/to.

Code:
022-05-17 22:44:27 uart.c:71:set_baud: set fpga_baud to 115200
2022-05-17 22:44:38 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0
2022-05-17 22:44:49 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0
2022-05-17 22:45:00 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0
2022-05-17 22:45:05 driver-btm-api.c:345:set_order_clock: chain[0]: set order clock, stragegy 3
2022-05-17 22:45:05 driver-btm-api.c:345:set_order_clock: chain[1]: set order clock, stragegy 3
2022-05-17 22:45:05 driver-btm-api.c:345:set_order_clock: chain[2]: set order clock, stragegy 3
2022-05-17 22:45:05 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2022-05-17 22:45:05 uart.c:71:set_baud: set fpga_baud to 3000000
2022-05-17 22:45:05 driver-btm-api.c:1574:check_clock_counter: freq 50 clock_counter_limit 6
2022-05-17 22:45:07 uart.c:71:set_baud: set fpga_baud to 115200
2022-05-17 22:45:07 voltage[0] = 1780
2022-05-17 22:45:07 voltage[1] = 1780
2022-05-17 22:45:07 voltage[2] = 1780
2022-05-17 22:45:07 power_api.c:219:set_working_voltage_raw: working_voltage_raw = 1780
mikeywith
legendary
Activity: 2170
Merit: 6279
be constructive or S.T.F.U
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
June 25, 2022, 07:11:48 PM
#425
Quote from: unisahmed on June 21, 2022, 10:08:00 PM
I moved the running board on to the 2nd machine and ran the stock firmware and surprisingly its been running pretty well for the past 4 days and 17hrs.

Like I explained in the first post, you could get lucky, I don't know how many combinations are there "I remember 3 of them for S9k", they could be the same", so every board you mix has a 1/3 chance, so more often than not, it doesn't work, but seems like you are pretty lucky, maybe mine to a solo pool and hit a whole block with that gear? Cheesy


I would also be interested in the new kernel log for the bad machine.
BitMaxz
legendary
Activity: 3206
Merit: 2904
Block halving is coming.
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
June 22, 2022, 12:01:48 PM
#424
Quote from: unisahmed on June 21, 2022, 10:08:00 PM
Hi Mike, thanks for the reply.

The very first day i ran these machines they were working with all 30 chips and 3 boards. After 30 minutes one Chain failed and then 2nd failed. so i decided to test the 2nd machine and the same shit repeated but only one chain failed on this machine.  I moved the running board on to the 2nd machine and ran the stock firmware and surprisingly its been running pretty well for the past 4 days and 17hrs. I'm getting 42T with the stock firmware.

As for the 1st machine, ill try to find someone locally and get it fixed.

If you can take the kernel logs from your first machine with the 2nd hashboard(Failed) maybe we can see some other reason under your kernel logs why the 2nd hashboard chain fail.

You can post the whole kernel logs here and make sure to paste it inside the insert code tag(A # button when editing/posting) or you can use pastebin.com and share the URL here.
Sometimes the issue is due to sensors or overheating and kernel logs will explain everything that happens in your machine.
unisahmed
newbie
Activity: 3
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
June 21, 2022, 10:08:00 PM
#423
Hi Mike, thanks for the reply.

The very first day i ran these machines they were working with all 30 chips and 3 boards. After 30 minutes one Chain failed and then 2nd failed. so i decided to test the 2nd machine and the same shit repeated but only one chain failed on this machine.  I moved the running board on to the 2nd machine and ran the stock firmware and surprisingly its been running pretty well for the past 4 days and 17hrs. I'm getting 42T with the stock firmware.

As for the 1st machine, ill try to find someone locally and get it fixed.

https://www.linkpicture.com/q/T17-42T-4Days-Mining.jpg

mikeywith
legendary
Activity: 2170
Merit: 6279
be constructive or S.T.F.U
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
June 20, 2022, 01:27:12 PM
#422
Quote from: unisahmed on June 16, 2022, 01:17:36 PM
I've got the same issue.
I have 2 T17 42T, one is running with 1 board and the other with 2 boards.
Can i swap one board to the other machine?

If you use the stock firmware you will have to try, there is a combination of voltages stored in the EPROM of each hash board, some will match well some won't, if you use custom firmware, you can simply mix and match as they don't care about the voltage readings.

However, why do you want to do that in the first place? unless you are going to sell the other PSU and Control board, or you are running out of space, it's better to keep 1 working board in 1 miner and 2 in the other, the 3 working boards will run a lot cooler sitting next to dead hash boards.
unisahmed
newbie
Activity: 3
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
June 16, 2022, 01:17:36 PM
#421
I've got the same issue.
I have 2 T17 42T, one is running with 1 board and the other with 2 boards.
Can i swap one board to the other machine?
mikeywith
legendary
Activity: 2170
Merit: 6279
be constructive or S.T.F.U
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
June 10, 2022, 09:02:41 PM
#420
Quote from: Akhan.96 on June 09, 2022, 06:47:08 PM
2 of my hashboards are not working and this is kernal log, someone please help in identifying the issue. And also, I can feel the current when the ASIC is turned on.
Code:
2022-06-09 22:27:38 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 18 asic, times 0
2022-06-09 22:28:31 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2022-06-09 22:28:43 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0

The answer is in these 3 lines which I copied from your kernel log, your miner is T17 which has 30 chips of on each hashboard, they work in series which means one missing chip will stop the whole hash board, your chain 0 and 1 both have bad chips, chain 0 loses the signal on the 18th chip, chain 1 doesn't sense any chip at all, this is a very common issue with all the 17 series, most often caused by bad contact between the chip and the board itself, fixing it isn't an easy job and needs a good set of skills and hardware.

if you don't have those and don't want to send it for repair, try the freezer trick, seal the two hashboard in a plastic bag, drop them in the freezer for 2 days, not sure what does that exactly do to these hash boards, but it does work sometimes if you are lucky enough.
Akhan.96
newbie
Activity: 8
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
June 09, 2022, 06:47:08 PM
#419
2 of my hashboards are not working and this is kernal log, someone please help in identifying the issue. And also, I can feel the current when the ASIC is turned on.
Code:
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 34/13, WL threshold: 4096, image sequence number: 1567270514
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 47B540C7-9D9A-47A8-BA37-D4081EFEDE2D, small LPT model
ubi1: attaching mtd5
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 876:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 876:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 876:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 876:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_ec_hdr+0x68/0x1cc)
[] (ubi_io_read_ec_hdr) from [] (ubi_attach+0x130/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (ubi_attach+0x1ec/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1018:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1018:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1018:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1018:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_ec_hdr+0x68/0x1cc)
[] (ubi_io_read_ec_hdr) from [] (ubi_attach+0x130/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1018:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1018:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1018:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1018:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (ubi_attach+0x1ec/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4334/2396, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
UBIFS (ubi1:0): recovery needed
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (wear_leveling_worker+0x1e0/0x6a0)
[] (wear_leveling_worker) from [] (do_work+0xcc/0x100)
[] (do_work) from [] (ubi_thread+0x100/0x190)
[] (ubi_thread) from [] (kthread+0xdc/0xf0)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 876:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (wear_leveling_worker+0x1e0/0x6a0)
[] (wear_leveling_worker) from [] (do_work+0xcc/0x100)
[] (do_work) from [] (ubi_thread+0x100/0x190)
[] (ubi_thread) from [] (kthread+0xdc/0xf0)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Jun  9 22:30:39 (none) local0.notice bmminer: set_start_time_point total_tv_start_sys=328 total_tv_end_sys=329
Jun  9 22:30:42 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_api_detect return: 0
Jun  9 22:30:43 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_update_job return: 0
Jun  9 22:30:44 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_shutdown return: 0
Jun  9 22:30:44 (none) local0.err cgminer: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17
Jun  9 22:30:44 (none) local0.notice cgminer[1001]: about to send detect
Jun  9 22:30:44 (none) local0.notice cgminer[1001]: set_start_time_point total_tv_start_sys=333 total_tv_end_sys=334
Jun  9 22:30:44 (none) local0.notice cgminer[1001]: Probing for an alive pool
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: LOW POWER MODE!
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: Switching to pool 1 stratum+tcp://bs.poolbinance.com:3333 - first alive pool
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: in stratum_sthread 
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: Pool 1 difficulty changed to 131072
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: LOW POWER MODE!
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: in stratum_sthread 
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: Network diff set to 30.3T
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: POOL 1 support ab mode!
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: update job
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: job buf total len:2588, offset:2588
Jun  9 22:30:50 (none) local0.notice cgminer[1001]: about to send job, size is 2588
Jun  9 22:30:50 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2588
Jun  9 22:30:50 (none) local0.notice bmminer: parse job buf len:2588
Jun  9 22:30:51 (none) local0.notice cgminer[1001]: LOW POWER MODE!
Jun  9 22:30:51 (none) local0.warn cgminer[1001]: Pool 0 stratum+tcp://sha256.poolbinance.com:443 alive, testing stability
Jun  9 22:30:51 (none) local0.notice cgminer[1001]: in stratum_sthread 
Jun  9 22:30:51 (none) local0.notice cgminer[1001]: Pool 0 difficulty changed to 131072
Jun  9 22:30:51 (none) local0.notice cgminer[1001]: POOL 0 support ab mode!
Jun  9 22:30:55 (none) local0.warn cgminer[1001]: API running in IP access mode on port 4028 (16)
Jun  9 22:30:55 (none) local0.warn cgminer[1001]: Pool 0 stratum+tcp://sha256.poolbinance.com:443 stable for >120 seconds
Jun  9 22:30:55 (none) local0.warn cgminer[1001]: Switching to pool 0 stratum+tcp://sha256.poolbinance.com:443
Jun  9 22:31:22 (none) local0.notice cgminer[1001]: update job
Jun  9 22:31:22 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:31:22 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:31:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:31:22 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:31:42 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:31:42 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:31:42 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:31:42 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:31:42 (none) local0.notice cgminer[1001]: Accepted 50b85d56 Diff 208K/131072 BTM_SOC 0 pool 0 
Jun  9 22:31:50 (none) local0.notice cgminer[1001]: update job
Jun  9 22:31:50 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:31:50 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:31:50 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:31:50 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:31:50 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Jun  9 22:31:50 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Jun  9 22:32:16 (none) user.notice kernel: random: nonblocking pool is initialized
Jun  9 22:32:22 (none) local0.notice cgminer[1001]: update job
Jun  9 22:32:22 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:32:22 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:32:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:32:22 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:32:52 (none) local0.notice cgminer[1001]: update job
Jun  9 22:32:52 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:32:52 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:32:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:32:52 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:33:24 (none) local0.notice cgminer[1001]: update job
Jun  9 22:33:24 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:33:24 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:33:24 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:33:24 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:33:57 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:33:57 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:33:57 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:33:57 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:33:57 (none) local0.notice cgminer[1001]: Accepted 780c2d47 Diff 140K/131072 BTM_SOC 0 pool 0 
Jun  9 22:33:58 (none) local0.notice cgminer[1001]: update job
Jun  9 22:33:58 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:33:58 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:33:58 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:33:58 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:34:18 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:34:18 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:34:18 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:34:18 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:34:18 (none) local0.notice cgminer[1001]: Accepted 5174cdbc Diff 206K/131072 BTM_SOC 0 pool 0 
Jun  9 22:34:20 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:34:20 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:34:20 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:34:20 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:34:20 (none) local0.notice cgminer[1001]: Accepted 576c3c0d Diff 192K/131072 BTM_SOC 0 pool 0 
Jun  9 22:34:21 (none) local0.notice cgminer[1001]: Pool 0 difficulty changed to 65536
Jun  9 22:34:22 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:34:22 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:34:22 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:34:22 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:34:22 (none) local0.notice cgminer[1001]: Accepted 4799399e Diff 234K/131072 BTM_SOC 0 pool 0 
Jun  9 22:34:22 (none) local0.notice cgminer[1001]: update job
Jun  9 22:34:22 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:34:22 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:34:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:34:22 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:34:25 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:34:25 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:34:25 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:34:25 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:34:25 (none) local0.notice cgminer[1001]: Accepted 2d36be56 Diff 371K/65536 BTM_SOC 0 pool 0 
Jun  9 22:34:27 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Jun  9 22:34:27 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Jun  9 22:34:42 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Jun  9 22:34:42 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Jun  9 22:34:54 (none) local0.notice cgminer[1001]: update job
Jun  9 22:34:54 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:34:54 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:34:54 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:34:54 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:35:17 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:35:17 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:35:17 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:35:17 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:35:17 (none) local0.notice cgminer[1001]: Accepted f42b05d4 Diff 68.7K/65536 BTM_SOC 0 pool 0 
Jun  9 22:35:22 (none) local0.notice cgminer[1001]: update job
Jun  9 22:35:22 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:35:22 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:35:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:35:22 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:35:31 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:35:31 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:35:31 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:35:31 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:35:31 (none) local0.notice cgminer[1001]: Accepted 09b38038 Diff 1.73M/65536 BTM_SOC 0 pool 0 
Jun  9 22:35:36 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Jun  9 22:35:45 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:35:45 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:35:45 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:35:45 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:35:45 (none) local0.notice cgminer[1001]: Accepted eaa092d6 Diff 71.5K/65536 BTM_SOC 0 pool 0 
Jun  9 22:35:49 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:35:49 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:35:49 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:35:49 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:35:49 (none) local0.notice cgminer[1001]: Accepted 96f2d041 Diff 111K/65536 BTM_SOC 0 pool 0 
Jun  9 22:35:51 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:35:51 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:35:51 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:35:51 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:35:51 (none) local0.notice cgminer[1001]: Accepted ab4853f4 Diff 97.9K/65536 BTM_SOC 0 pool 0 
Jun  9 22:35:54 (none) local0.notice cgminer[1001]: update job
Jun  9 22:35:54 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:35:54 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:35:54 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:35:54 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:36:09 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:36:09 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:36:09 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:36:09 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:36:09 (none) local0.notice cgminer[1001]: Accepted addf7af1 Diff 96.5K/65536 BTM_SOC 0 pool 0 
Jun  9 22:36:24 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:36:24 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:36:24 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:36:24 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:36:24 (none) local0.notice cgminer[1001]: Accepted 81716e83 Diff 130K/65536 BTM_SOC 0 pool 0 
Jun  9 22:36:24 (none) local0.notice cgminer[1001]: update job
Jun  9 22:36:24 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:36:24 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:36:24 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:36:24 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:36:54 (none) local0.notice cgminer[1001]: update job
Jun  9 22:36:54 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:36:54 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:36:54 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:36:54 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:37:25 (none) local0.notice cgminer[1001]: update job
Jun  9 22:37:25 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:37:25 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:37:25 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:37:25 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:37:56 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:37:56 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:37:56 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:37:56 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:37:56 (none) local0.notice cgminer[1001]: Accepted 07b837b6 Diff 2.17M/65536 BTM_SOC 0 pool 0 
Jun  9 22:37:57 (none) local0.notice cgminer[1001]: update job
Jun  9 22:37:57 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:37:57 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:37:57 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:37:57 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:38:06 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:38:06 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:38:06 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:38:06 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:38:06 (none) local0.notice cgminer[1001]: Accepted 120987b0 Diff 930K/65536 BTM_SOC 0 pool 0 
Jun  9 22:38:11 (none) local0.notice cgminer[1001]: Stratum from pool 0 detected new block at height 740105
Jun  9 22:38:11 (none) local0.notice cgminer[1001]: update job
Jun  9 22:38:11 (none) local0.notice cgminer[1001]: job buf total len:2207, offset:2207
Jun  9 22:38:11 (none) local0.notice cgminer[1001]: about to send job, size is 2207
Jun  9 22:38:11 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2207
Jun  9 22:38:11 (none) local0.notice bmminer: parse job buf len:2207
Jun  9 22:38:11 (none) local0.notice cgminer[1001]: update job
Jun  9 22:38:11 (none) local0.notice cgminer[1001]: job buf total len:2207, offset:2207
Jun  9 22:38:11 (none) local0.notice cgminer[1001]: about to send job, size is 2207
Jun  9 22:38:11 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2207
Jun  9 22:38:11 (none) local0.notice bmminer: parse job buf len:2207
Jun  9 22:38:13 (none) local0.notice cgminer[1001]: update job
Jun  9 22:38:13 (none) local0.notice cgminer[1001]: job buf total len:2560, offset:2560
Jun  9 22:38:13 (none) local0.notice cgminer[1001]: about to send job, size is 2560
Jun  9 22:38:13 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2560
Jun  9 22:38:13 (none) local0.notice bmminer: parse job buf len:2560
Jun  9 22:38:40 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:38:40 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:38:40 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:38:40 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:38:41 (none) local0.notice cgminer[1001]: Accepted a7ba88c2 Diff 100K/65536 BTM_SOC 0 pool 0 
Jun  9 22:38:43 (none) local0.notice cgminer[1001]: update job
Jun  9 22:38:43 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:38:43 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:38:43 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:38:43 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:38:51 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:38:51 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:38:51 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:38:51 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:38:51 (none) local0.notice cgminer[1001]: Accepted 50d75dbc Diff 208K/65536 BTM_SOC 0 pool 0 
Jun  9 22:39:07 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:39:07 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:39:07 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:39:07 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:39:07 (none) local0.notice cgminer[1001]: Accepted 44c67cba Diff 244K/65536 BTM_SOC 0 pool 0 
Jun  9 22:39:10 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:39:10 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:39:10 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:39:10 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:39:10 (none) local0.notice cgminer[1001]: Accepted 369f909c Diff 307K/65536 BTM_SOC 0 pool 0 
Jun  9 22:39:13 (none) local0.notice cgminer[1001]: update job
Jun  9 22:39:13 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:39:13 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:39:13 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:39:13 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:39:16 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:39:16 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:39:16 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:39:16 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:39:16 (none) local0.notice cgminer[1001]: Accepted db12fb04 Diff 76.6K/65536 BTM_SOC 0 pool 0 
Jun  9 22:39:43 (none) local0.notice cgminer[1001]: update job
Jun  9 22:39:43 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:39:43 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:39:43 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:39:43 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:39:49 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:39:49 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:39:49 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:39:49 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:39:50 (none) local0.notice cgminer[1001]: Accepted 8c7fb881 Diff 119K/65536 BTM_SOC 0 pool 0 
Jun  9 22:39:51 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:39:51 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:39:51 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:39:51 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:39:51 (none) local0.notice cgminer[1001]: Accepted bfb82bc7 Diff 87.5K/65536 BTM_SOC 0 pool 0 
Jun  9 22:39:57 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:39:57 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:39:57 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:39:57 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:39:58 (none) local0.notice cgminer[1001]: Accepted 27768741 Diff 425K/65536 BTM_SOC 0 pool 0 
Jun  9 22:40:00 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:40:00 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:40:00 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:40:00 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:40:00 (none) local0.notice cgminer[1001]: Accepted 8f1ae91b Diff 117K/65536 BTM_SOC 0 pool 0 
Jun  9 22:40:07 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:40:07 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:40:07 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:40:07 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:40:07 (none) local0.notice cgminer[1001]: Accepted 84a54b66 Diff 126K/65536 BTM_SOC 0 pool 0 
Jun  9 22:40:12 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:40:12 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:40:12 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:40:12 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:40:13 (none) local0.notice cgminer[1001]: Accepted b279646a Diff 94K/65536 BTM_SOC 0 pool 0 
Jun  9 22:40:15 (none) local0.notice cgminer[1001]: update job
Jun  9 22:40:15 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:40:15 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:40:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:40:15 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:40:16 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:40:16 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:40:16 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:40:16 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:40:16 (none) local0.notice cgminer[1001]: Accepted 6eaaf1ff Diff 152K/65536 BTM_SOC 0 pool 0 
Jun  9 22:40:22 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:40:22 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:40:22 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:40:22 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:40:22 (none) local0.notice cgminer[1001]: Accepted 7d258eb8 Diff 134K/65536 BTM_SOC 0 pool 0 
Jun  9 22:40:28 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:40:28 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:40:28 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:40:28 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:40:28 (none) local0.notice cgminer[1001]: Accepted 2deb0936 Diff 365K/65536 BTM_SOC 0 pool 0 
Jun  9 22:40:43 (none) local0.notice cgminer[1001]: update job
Jun  9 22:40:43 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:40:43 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:40:43 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:40:43 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:41:08 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:41:08 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:41:08 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:41:08 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:41:08 (none) local0.notice cgminer[1001]: Accepted b48ec3e4 Diff 92.9K/65536 BTM_SOC 0 pool 0 
Jun  9 22:41:15 (none) local0.notice cgminer[1001]: update job
Jun  9 22:41:15 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:41:15 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:41:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:41:15 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:41:43 (none) local0.notice cgminer[1001]: update job
Jun  9 22:41:43 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:41:43 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:41:43 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:41:43 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:41:49 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:41:49 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:41:49 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:41:49 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:41:49 (none) local0.notice cgminer[1001]: Accepted 1a1df987 Diff 642K/65536 BTM_SOC 0 pool 0 
Jun  9 22:42:15 (none) local0.notice cgminer[1001]: update job
Jun  9 22:42:15 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:42:15 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:42:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:42:15 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:42:19 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:42:19 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:42:19 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:42:19 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:42:19 (none) local0.notice cgminer[1001]: Accepted 26d0d94b Diff 432K/65536 BTM_SOC 0 pool 0 
Jun  9 22:42:37 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:42:37 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:42:37 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:42:37 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:42:37 (none) local0.notice cgminer[1001]: Accepted bd3bd0b1 Diff 88.7K/65536 BTM_SOC 0 pool 0 
Jun  9 22:42:45 (none) local0.notice cgminer[1001]: update job
Jun  9 22:42:45 (none) local0.notice cgminer[1001]: job buf total len:2559, offset:2559
Jun  9 22:42:45 (none) local0.notice cgminer[1001]: about to send job, size is 2559
Jun  9 22:42:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2559
Jun  9 22:42:45 (none) local0.notice bmminer: parse job buf len:2559
Jun  9 22:43:10 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:43:10 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:43:10 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:43:10 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:43:10 (none) local0.notice cgminer[1001]: Accepted 3372d7e4 Diff 326K/65536 BTM_SOC 0 pool 0 
Jun  9 22:43:11 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:43:11 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:43:11 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:43:11 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:43:11 (none) local0.notice cgminer[1001]: Accepted 1d9ab3c9 Diff 567K/65536 BTM_SOC 0 pool 0 
Jun  9 22:43:15 (none) local0.notice cgminer[1001]: update job
Jun  9 22:43:15 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:43:15 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:43:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:43:15 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:43:32 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:43:32 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:43:32 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:43:32 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:43:32 (none) local0.notice cgminer[1001]: Accepted b65784d0 Diff 92K/65536 BTM_SOC 0 pool 0 
Jun  9 22:43:33 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:43:33 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:43:33 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:43:33 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:43:33 (none) local0.notice cgminer[1001]: Accepted b6844e1f Diff 91.9K/65536 BTM_SOC 0 pool 0 
Jun  9 22:43:45 (none) local0.notice cgminer[1001]: update job
Jun  9 22:43:45 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:43:45 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:43:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:43:45 (none) local0.notice bmminer: parse job buf len:2591
Jun  9 22:44:14 (none) local0.notice bmminer: need data size:491, actual size:491
Jun  9 22:44:14 (none) local0.notice cgminer[1001]: got nonce sz 491
Jun  9 22:44:14 (none) local0.notice cgminer[1001]: Pool 0 stale share detected, submitting as user requested
Jun  9 22:44:14 (none) local0.notice cgminer[1001]: cb_bitmain_submit_nonce nonce submited
Jun  9 22:44:18 (none) local0.notice cgminer[1001]: Accepted fb612c48 Diff 66.7K/65536 BTM_SOC 0 pool 0 
Jun  9 22:44:19 (none) local0.notice cgminer[1001]: update job
Jun  9 22:44:19 (none) local0.notice cgminer[1001]: job buf total len:2591, offset:2591
Jun  9 22:44:19 (none) local0.notice cgminer[1001]: about to send job, size is 2591
Jun  9 22:44:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4800480 size: 2591
Jun  9 22:44:19 (none) local0.notice bmminer: parse job buf len:2591
2022-06-09 22:26:08 driver-btm-api.c:663:init_freq_mode: This is scan-user version
2022-06-09 22:26:08 driver-btm-api.c:2028:bitmain_soc_init: opt_multi_version     = 1
2022-06-09 22:26:08 driver-btm-api.c:2029:bitmain_soc_init: opt_bitmain_ab        = 1
2022-06-09 22:26:08 driver-btm-api.c:2030:bitmain_soc_init: opt_bitmain_work_mode = 0
2022-06-09 22:26:08 driver-btm-api.c:2031:bitmain_soc_init: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17
2022-06-09 22:26:08 driver-btm-api.c:2032:bitmain_soc_init: commit version: 1c5be6f 2020-04-20 16:18:14, build by: lol 2020-04-23 16:35:04
2022-06-09 22:26:08 driver-btm-api.c:1844:show_sn: no SN got, please write SN to /nvdata/sn
2022-06-09 22:26:08 driver-btm-api.c:1167:miner_device_init: Detect 256MB control board of XILINX
2022-06-09 22:26:08 driver-btm-api.c:1115:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2022-06-09 22:26:08 thread.c:885:create_read_nonce_reg_thread: create thread
2022-06-09 22:26:14 driver-btm-api.c:1099:init_miner_version: miner ID : 816c6d282b10481c
2022-06-09 22:26:14 driver-btm-api.c:1105:init_miner_version: FPGA Version = 0xB013
2022-06-09 22:26:15 eeprom.c:431:check_pattern_test_level: L1 board
2022-06-09 22:26:17 eeprom.c:431:check_pattern_test_level: L1 board
2022-06-09 22:26:19 eeprom.c:431:check_pattern_test_level: L1 board
2022-06-09 22:26:19 driver-btm-api.c:737:get_product_id: product_id[0] = 1
2022-06-09 22:26:19 driver-btm-api.c:737:get_product_id: product_id[1] = 1
2022-06-09 22:26:19 driver-btm-api.c:737:get_product_id: product_id[2] = 1
2022-06-09 22:26:19 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[0] = 1
2022-06-09 22:26:19 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[1] = 1
2022-06-09 22:26:19 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[2] = 1
2022-06-09 22:26:19 driver-btm-api.c:1919:bitmain_board_init: g_ccdly_opt = 1
2022-06-09 22:26:19 driver-btm-api.c:676:_set_project_type: project:2
2022-06-09 22:26:19 driver-btm-api.c:706:_set_project_type: Project type: Antminer T17
2022-06-09 22:26:19 driver-btm-api.c:717:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2022-06-09 22:26:19 driver-btm-api.c:718:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2022-06-09 22:26:19 driver-btm-api.c:717:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2022-06-09 22:26:19 driver-btm-api.c:718:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2022-06-09 22:26:19 driver-btm-api.c:717:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2022-06-09 22:26:19 driver-btm-api.c:718:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2022-06-09 22:26:22 driver-btm-api.c:1939:bitmain_board_init: Fan check passed.
2022-06-09 22:26:24 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-06-09 22:26:27 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2022-06-09 22:26:29 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-06-09 22:26:32 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2022-06-09 22:26:34 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-06-09 22:26:38 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2022-06-09 22:26:38 thread.c:880:create_pic_heart_beat_thread: create thread
2022-06-09 22:26:38 power_api.c:55:power_init: power init ... 
2022-06-09 22:26:38 driver-btm-api.c:1949:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2022-06-09 22:26:38 power_api.c:46:power_off: init gpio907
2022-06-09 22:27:10 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2022-06-09 22:27:15 power_api.c:124:check_voltage_multi: retry time: 0
2022-06-09 22:27:17 power_api.c:86:get_average_voltage: chain[0], voltage is: 20.493838 
2022-06-09 22:27:19 power_api.c:86:get_average_voltage: chain[1], voltage is: 19.838672 
2022-06-09 22:27:21 power_api.c:86:get_average_voltage: chain[2], voltage is: 19.269228 
2022-06-09 22:27:21 power_api.c:97:get_average_voltage: aveage voltage is: 19.867246 
2022-06-09 22:27:21 power_api.c:110:check_voltage: target_vol = 17.00, actural_vol = 19.87, more than 1.0v diff.
2022-06-09 22:27:22 power_api.c:124:check_voltage_multi: retry time: 1
2022-06-09 22:27:23 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.295664 
2022-06-09 22:27:25 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.738467 
2022-06-09 22:27:28 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.862871 
2022-06-09 22:27:28 power_api.c:97:get_average_voltage: aveage voltage is: 17.632334 
2022-06-09 22:27:28 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000 
2022-06-09 22:27:28 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-06-09 22:27:38 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 18 asic, times 0
2022-06-09 22:27:48 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 18 asic, times 1
2022-06-09 22:27:58 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 18 asic, times 2
2022-06-09 22:27:58 driver-btm-api.c:1069:check_asic_number: Chain 0 only find 18 asic, will power off hash board 0
2022-06-09 22:28:11 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2022-06-09 22:28:21 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2022-06-09 22:28:31 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2022-06-09 22:28:31 driver-btm-api.c:1069:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2022-06-09 22:28:43 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2022-06-09 22:28:44 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2022-06-09 22:28:44 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
2022-06-09 22:28:44 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2022-06-09 22:28:44 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6
2022-06-09 22:28:44 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-06-09 22:28:44 voltage[2] = 1690
2022-06-09 22:28:44 power_api.c:140:set_working_voltage: working_voltage = 16.900000
2022-06-09 22:28:46 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success.
2022-06-09 22:28:46 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2022-06-09 22:28:46 driver-btm-api.c:252:check_bringup_temp: Bring up temperature is 32
2022-06-09 22:28:46 thread.c:900:create_check_miner_status_thread: create thread
2022-06-09 22:28:46 thread.c:890:create_set_miner_status_thread: create thread
2022-06-09 22:28:46 driver-btm-api.c:613:calculate_timeout: dev->timeout = 392
2022-06-09 22:28:46 thread.c:875:create_temperature_monitor_thread: create thread
2022-06-09 22:28:46 freq_tuning.c:159:freq_tuning_get_max_freq: Max freq of tuning is 760
2022-06-09 22:28:46 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.60 ...
2022-06-09 22:29:12 power_api.c:124:check_voltage_multi: retry time: 0
2022-06-09 22:29:14 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.762959 
2022-06-09 22:29:14 power_api.c:97:get_average_voltage: aveage voltage is: 17.762959 
2022-06-09 22:30:10 driver-btm-api.c:644:set_timeout: freq 720 final timeout=163
2022-06-09 22:30:10 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 16.90 ...
2022-06-09 22:30:31 power_api.c:124:check_voltage_multi: retry time: 0
2022-06-09 22:30:34 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.089424 
2022-06-09 22:30:34 power_api.c:97:get_average_voltage: aveage voltage is: 17.089424 
2022-06-09 22:30:34 frequency.c:654:get_current_min_freq: current min freq 720
2022-06-09 22:30:34 driver-btm-api.c:1693:check_clock_counter: freq 720 clock_counter_limit 92
2022-06-09 22:30:35 thread.c:895:create_check_system_status_thread: create thread
2022-06-09 22:30:35 driver-btm-api.c:2155:bitmain_soc_init: Init done!
2022-06-09 22:30:35 driver-btm-api.c:205:set_miner_status: STATUS_INIT
2022-06-09 22:30:39 driver-btm-api.c:205:set_miner_status: STATUS_OKAY
2022-06-09 22:30:50 driver-btm-api.c:1325:dhash_chip_send_job: Version num 4
2022-06-09 22:35:50 thread.c:441:is_zero_nonce_happened: chain_nonce[2] = 15762
agbermejo
newbie
Activity: 7
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
March 14, 2022, 08:56:32 AM
#418
Arshdeep Singh
newbie
Activity: 1
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
February 05, 2022, 05:50:34 AM
#417
Quote from: philipma1957 on June 17, 2020, 01:08:34 AM
Quote from: Guinsanity on June 16, 2020, 11:59:44 AM
I wtb a couple of psu fans f95zone for my t17, two of then are not working w40s12bmd5 from nidec
12vdc 0.64a
https://www.nidec.com/en/product/search/category/B101/M111/S100/NCJ-W40S12BMD5-5/
Anyone knows where to buy?
delta makes one that should work it uwatchfree is 40x40x28. same size. it is .81 amp which is close to your spec. it is four pin. ebay item 283157645798 even if you dont order it from that seller you can look for part number.
REGARDS
Heathen23
newbie
Activity: 24
Merit: 30
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 20, 2022, 04:19:02 PM
#416
Appreciate your insights wndsnb. Over the weekend I am going to take out each board and heat them up to the point so that the sinks are resoldered. If I find some are really out of place them I am going to take them out and solder them individually. Once cold, I will clean them with canned air. Finally I am going to check the signals also with multimeter. Then will put them one by one into miners and see what happens. I did not buy the test zig. Would you recommend it?  

They used to work fine and were producing 75 TH @ 2728 watts each. We had a strange hot week during early Jan and that killed them. Now I think the problem is it is so cold that the boards are finding it difficult to start and of course some of them developed heat sink problem during excessive hot days.
wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 20, 2022, 12:54:35 PM
#415
I find it pretty common to have non-repeatable issues, so what you describe doesn't surprise me at all. Just removing and replacing a board can introduce or temporarily fix an issue. I routinely have to bang hashboards around and/or blow cold air on them to get them to fail so I can identify the location of the issue.

Most likely, every board that you have seen a low asic count on has a problem and needs repair.

If you want to try to eliminate variables, just test out each board one at a time using the same data cable and control board connector.
Heathen23
newbie
Activity: 24
Merit: 30
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 19, 2022, 09:59:55 AM
#414
The other miner was running 3 boards but board 2 was down. The boards had volatage 1940, 1960 and 1960. Since the middle board was down it was running with 1940 first and 1960 3rd board and was giving full hash rate. Thus my conclusion when there is only 2 boards the stock firmware does not stop for voltage difference.

So I started with

Miner 1
1920 - issues
1920- good
1960 - issues

Miner 2
1940 - good
1960- Issues
1960- good
 
I replaced the 3rd 1960 board in machine 1 with 1940 in 2nd. I switched to Hive to get around voltage check of stock firmware and to get a little more clue for chip level monitoring.

So I now have a more interesting puzzle.

Miner 1 -
1920 - good now. Had 0 asic in the same slot & same miner before. Hive on indicating a lot of bad domains but running it in low power mode. Should I re-solder the bad domains?
1920 - good. Was good same slot same miner.
1940 - now 0 asic but was good in machine 2 slot 1. Power supply or power cord issue in this slot? I am thinking about buying a new power supply and a new control board to just get them out of equation. I can't find a new control board from reliable sources. But these 2 machines ran flawlessly even a month ago.

Miner 2 -
1960 - good. had 0 asic when it was in slot 2 but good in slot 1 same machine. Hive on indicating a lot of bad domains but running it in low power mode. Should I re-solder the bad domains?
1960 - good. It was good in slot 3 as well. Same machine.
1960 - o asic. had o asic in machine 1 slot 3. send for repair?

Now I am completely confused


Can anybody confirm that in immersion mining losing connection with a heatsink is not this big a problem? I was planning for a DIY immersion setup. The sinks are visibly attached well to the board. After I soldered few that I did not feel was good from visual inspection, they are all firmly attached to the chips now.

[moderator's note: consecutive posts merged]
wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 18, 2022, 10:33:52 PM
#413
Thanks for the follow-up. That makes sense, looks like it is only checking the settings for the boards that it found all chips on.

So your other miner was only running 2 boards or all 3 with the different voltage values? If it was running all 3, then I'd check to see if both your miners are running the same firmware version.
Heathen23
newbie
Activity: 24
Merit: 30
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 18, 2022, 08:55:19 PM
#412
I pulled in the board with 1940 voltage but it does not work with the other 2. I am still getting the same error

2022-01-19 00:48:41 voltage[0] = 1920
2022-01-19 00:48:41 voltage[1] = 1920
2022-01-19 00:48:41 voltage[2] = 1940
2022-01-19 00:48:41 Voltage are different. Will exit.
2022-01-19 00:48:41 driver-btm-api.c:222:set_miner_status: ERROR_SOC_INIT
2022-01-19 00:48:41 driver-btm-api.c:156:stop_mining: stop mining: soc init failed!
2022-01-19 00:48:41 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
2022-01-19 00:48:41 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****

But I think I get this error only when all 3 boards are attempted to be run that is they all detect 65 ASIC. It is not an issue when only 2 boards are running for example when 1 of them finds 0 asic, it tries to start the other two.

Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203316K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 26060K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 13020K (cce49000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 11906131
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 5C61C316-5FAD-4CFA-B280-2AFAE13C9D72, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 169213079
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6FB1BE46-BF1C-4F4C-9CA2-2F82009B82B4, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2022-01-19 00:46:23 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2022-01-19 00:46:23 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version     = 1
2022-01-19 00:46:23 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab        = 1
2022-01-19 00:46:23 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2022-01-19 00:46:23 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun  2 10:31:07 CST 2020 type: Antminer S17+
2022-01-19 00:46:23 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2022-01-19 00:46:23 driver-btm-api.c:2083:show_sn: len:16, 8034b4442b104814
2022-01-19 00:46:23 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2022-01-19 00:46:23 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2022-01-19 00:46:23 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8034b4442b104814
2022-01-19 00:46:23 fan.c:284:front_fan_power_on: Note: front fan is power on!
2022-01-19 00:46:23 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2022-01-19 00:46:23 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2022-01-19 00:46:23 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2022-01-19 00:46:29 driver-btm-api.c:1239:init_miner_version: miner ID : 8034b4442b104814
2022-01-19 00:46:29 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2022-01-19 00:46:35 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2022-01-19 00:46:35 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2022-01-19 00:46:35 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2022-01-19 00:46:35 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2022-01-19 00:46:35 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2022-01-19 00:46:35 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2022-01-19 00:46:35 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2022-01-19 00:46:35 thread.c:1363:create_read_nonce_reg_thread: create thread
2022-01-19 00:46:41 driver-btm-api.c:1239:init_miner_version: miner ID : 8034b4442b104814
2022-01-19 00:46:41 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2022-01-19 00:46:46 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2022-01-19 00:46:46 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2022-01-19 00:46:46 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2022-01-19 00:46:46 driver-btm-api.c:792:_set_project_type: project:0
2022-01-19 00:46:46 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2022-01-19 00:46:46 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2022-01-19 00:46:46 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2022-01-19 00:46:46 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2022-01-19 00:46:46 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2022-01-19 00:46:46 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2022-01-19 00:46:46 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2022-01-19 00:46:48 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2022-01-19 00:46:49 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-01-19 00:46:51 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2022-01-19 00:46:52 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-01-19 00:46:54 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2022-01-19 00:46:55 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-01-19 00:46:57 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2022-01-19 00:46:57 thread.c:1358:create_pic_heart_beat_thread: create thread
2022-01-19 00:46:57 power_api.c:213:power_init: Power init:
2022-01-19 00:46:57 power_api.c:214:power_init: current_voltage_raw = 0
2022-01-19 00:46:57 power_api.c:215:power_init: highest_voltage_raw = 2100
2022-01-19 00:46:57 power_api.c:216:power_init: working_voltage_raw = 1950
2022-01-19 00:46:57 power_api.c:217:power_init: higher_voltage_raw  = 2040
2022-01-19 00:46:57 power_api.c:218:power_init: check_asic_voltage_raw  = 2100
2022-01-19 00:46:57 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2022-01-19 00:47:29 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2022-01-19 00:47:55 power_api.c:85:check_voltage_multi: retry time: 0
2022-01-19 00:47:56 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.094872
2022-01-19 00:47:57 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.097560
2022-01-19 00:47:58 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.170731
2022-01-19 00:47:58 power_api.c:53:_get_avg_voltage: average_voltage = 21.121054
2022-01-19 00:47:58 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.12, check voltage passed.
2022-01-19 00:47:58 uart.c:72:set_baud: set fpga_baud to 115200
2022-01-19 00:48:10 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2022-01-19 00:48:21 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2022-01-19 00:48:32 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2022-01-19 00:48:40 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2022-01-19 00:48:40 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2022-01-19 00:48:40 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3
2022-01-19 00:48:40 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
2022-01-19 00:48:41 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2022-01-19 00:48:41 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2022-01-19 00:48:41 voltage[0] = 1920
2022-01-19 00:48:41 voltage[1] = 1920
2022-01-19 00:48:41 voltage[2] = 1940
2022-01-19 00:48:41 Voltage are different. Will exit.
2022-01-19 00:48:41 driver-btm-api.c:222:set_miner_status: ERROR_SOC_INIT
2022-01-19 00:48:41 driver-btm-api.c:156:stop_mining: stop mining: soc init failed!
2022-01-19 00:48:41 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
2022-01-19 00:48:41 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 18, 2022, 02:27:17 PM
#411
Aftermarket firmware like braiins will just ignore the voltage setting. The previous owner probably swapped out a dead hashboard and used the aftermarket firmware to get it to run.

That's interesting that you have one with different voltages that work, I never tested to see if there was an acceptable difference factory firmware would run with. Yeah, see if the 1940 board works with the 1920 boards, I'm interested in seeing the results.

Heathen23
newbie
Activity: 24
Merit: 30
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 18, 2022, 10:46:21 AM
#410
Quote from: wndsnb on January 17, 2022, 08:04:47 PM
Looks like chain[2] was originally from a different miner. That voltage is the setting in the eeprom on the hashboard. The miner will not operate if the 3 hashboards don't have the same voltage setting. So you'll either need to buy a programmer to burn the eeprom with compatible settings or use aftermarket firmware.

Thank you so much for helping me again. You are absolutely correct. I bought this miner 2nd hand and it came with bosminer. It ran fine for few months. When it started to give trouble I switched to stock firmware to troubleshoot. I believe eeprom has a finite reprogramming life. May be the previous owner has already exhausted that. So he was using bosminer to get away with it. It is also possible that I misplaced this 3rd board from another s17+ miner while cleaning or trouble shooting.

In this S17+ I have boards with 1920, 1920 and 1960. The board with 1960 being kicked out.
In another s17+ cards are running with stock firmware with voltages 1940 & 1960. So it looks like a difference of 40 is unacceptable but a difference of 20 is acceptable? I am thinking if I exchange this board with the one having 1940 in the other s17+ then may be it will run with 1960 there and may be the board with 1940 will be acceptable in this s17+ where others boards are at 1920. I will do that and report back after the day job. I am also thinking about trying vniche and awesome miner if they are better at troubleshooting. While bosminer works fine for running them efficiently it is not good for trouble shooting or I am not good enough to trouble shoot with bosminer.

Really appreciate your insight and guidance wndsnb! I gave you a few merits. Being a newbie I don't have much to give.
DwarfNo3
newbie
Activity: 5
Merit: 0
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 18, 2022, 10:04:22 AM
#409
Thank you wndsnb. I tried to give you merit or something but I'm not very familiar with forums.

I got too confused about the voltage I thought it was something else.
Saskfarmer
newbie
Activity: 25
Merit: 24
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 17, 2022, 11:22:53 PM
#408
Those that have both S17 Pro’s and S17+ At the same money for each which would you prefer?   I just finished going through the first lot of 50 of S17 pro’s and honestly I’m pleased how well they survived the trip from China.  Have the same deal lined up for S17+’s but for some reason I think they have way more failures.
wndsnb
hero member
Activity: 544
Merit: 589
Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
January 17, 2022, 08:04:47 PM
#407
Looks like chain[2] was originally from a different miner. That voltage is the setting in the eeprom on the hashboard. The miner will not operate if the 3 hashboards don't have the same voltage setting. So you'll either need to buy a programmer to burn the eeprom with compatible settings or use aftermarket firmware.
Pages:
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: