Topic: S3Miner Connect but wont hash (Read 1170 times)

Quote from: notlist3d on June 29, 2015, 09:25:27 PM

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

Quote from: cody0520 on June 29, 2015, 10:01:47 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

Green ethernet light is blinking alot faster now, But still no Hashing speed

Can you take a screenshot of configuration page and status page please.

Pool config - http://gyazo.com/41d436ed1e8f4832423887a414f943f7
Miner Status - http://gyazo.com/456f1d81444dac434d0beb9881e7b007
Internet config - http://gyazo.com/a4b8679592b099b89e95a1d4cebc1f43
Router Config - http://gyazo.com/8ccbcbc71c86506c5900786c41c99913

It looks good have you made sure of your worker name?

On antpool status screen it should say "Worker: (your real worker name).WorkerID or (your real worker name)_WorkerID (WorkerID must consist of letters or numbers). Workers are added automatically, use any password.

If you are sure on it then do you have teamviewer or can you install it? With it I can remote in and take a look much quicker.

Im pretty sure Not 100% though
http://gyazo.com/db787e34d038a989fe18a9630607de52 - this shows i dont have a worker

But i typed in cody0520.worker1 PW 123

Sending a PM to see about teamviewer option.

sounds good

notlist3d

legendary

Activity: 1456

Merit: 1000

Im pretty sure Not 100% though
http://gyazo.com/db787e34d038a989fe18a9630607de52 - this shows i dont have a worker

But i typed in cody0520.worker1 PW 123

Sending a PM to see about teamviewer option.

cody0520

newbie

Activity: 12

Merit: 0

Quote from: notlist3d on June 29, 2015, 09:56:24 PM

Quote from: cody0520 on June 29, 2015, 09:48:55 PM

Quote from: notlist3d on June 29, 2015, 09:45:58 PM

Quote from: notlist3d on June 29, 2015, 09:25:27 PM

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

Quote from: cody0520 on June 29, 2015, 09:48:55 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

Green ethernet light is blinking alot faster now, But still no Hashing speed

Can you take a screenshot of configuration page and status page please.

Pool config - http://gyazo.com/41d436ed1e8f4832423887a414f943f7
Miner Status - http://gyazo.com/456f1d81444dac434d0beb9881e7b007
Internet config - http://gyazo.com/a4b8679592b099b89e95a1d4cebc1f43
Router Config - http://gyazo.com/8ccbcbc71c86506c5900786c41c99913

It looks good have you made sure of your worker name?

On antpool status screen it should say "Worker: (your real worker name).WorkerID or (your real worker name)_WorkerID (WorkerID must consist of letters or numbers). Workers are added automatically, use any password.

If you are sure on it then do you have teamviewer or can you install it? With it I can remote in and take a look much quicker.

Im pretty sure Not 100% though
http://gyazo.com/db787e34d038a989fe18a9630607de52 - this shows i dont have a worker

But i typed in cody0520.worker1 PW 123

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: notlist3d on June 29, 2015, 09:45:58 PM

Quote from: notlist3d on June 29, 2015, 09:25:27 PM

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

Quote from: notlist3d on June 29, 2015, 09:45:58 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

Green ethernet light is blinking alot faster now, But still no Hashing speed

Can you take a screenshot of configuration page and status page please.

Pool config - http://gyazo.com/41d436ed1e8f4832423887a414f943f7
Miner Status - http://gyazo.com/456f1d81444dac434d0beb9881e7b007
Internet config - http://gyazo.com/a4b8679592b099b89e95a1d4cebc1f43
Router Config - http://gyazo.com/8ccbcbc71c86506c5900786c41c99913

It looks good have you made sure of your worker name?

On antpool status screen it should say "Worker: (your real worker name).WorkerID or (your real worker name)_WorkerID (WorkerID must consist of letters or numbers). Workers are added automatically, use any password.

If you are sure on it then do you have teamviewer or can you install it? With it I can remote in and take a look much quicker. (Just please don't have anything confidential or passwords etc up. As I don't want to see anything besides antpool page and miner really).

cody0520

newbie

Activity: 12

Merit: 0

Quote from: notlist3d on June 29, 2015, 09:25:27 PM

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

Green ethernet light is blinking alot faster now, But still no Hashing speed

Can you take a screenshot of configuration page and status page please.

Pool config - http://gyazo.com/41d436ed1e8f4832423887a414f943f7
Miner Status - http://gyazo.com/456f1d81444dac434d0beb9881e7b007
Internet config - http://gyazo.com/a4b8679592b099b89e95a1d4cebc1f43
Router Config - http://gyazo.com/8ccbcbc71c86506c5900786c41c99913

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: notlist3d on June 29, 2015, 09:25:27 PM

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

Quote from: notlist3d on June 29, 2015, 09:25:27 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

Green ethernet light is blinking alot faster now, But still no Hashing speed

Can you take a screenshot of configuration page and status page please.

cody0520

newbie

Activity: 12

Merit: 0

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

Green ethernet light is blinking alot faster now, But still no Hashing speed

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

Quote from: notlist3d on June 29, 2015, 08:45:21 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

cody0520

newbie

Activity: 12

Merit: 0

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

here ya go didnt blank anything out, well because meh it will change once i get it mining

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1. pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: notlist3d on June 29, 2015, 08:38:40 PM

awesome

Sigh updating miner config to Antpool still results in nothing :/

Can you upload screenshot of your configuration page please?

cody0520

newbie

Activity: 12

Merit: 0

Quote from: cody0520 on June 29, 2015, 08:14:17 PM

Quote from: notlist3d on June 29, 2015, 07:48:18 PM

http://i100.photobucket.com/albums/m25/notlist3d/pool_zps7c2let1r.jpg

Mmk since im using a Macbook pro i cant figure out how to screenshot the status page, but the status page is blank no information is showing

Are you in us? I'm going to assume yes but if not this needs a little tweaking for possibly different server.

Instead of eobot lets go over to a real pool. I suggest trying antpool, sign up here - https://www.antpool.com/home.htm

You will need the worker name. I blacked mine out but it will be workername.something. For example if worker name is cody, then a example is cody.s3 .

Below is one of my configs to show a working one.

Click for full size - http://i100.photobucket.com/albums/m25/notlist3d/pool_zps7c2let1r.jpg

If you have trouble just let me know with what part.

Yea im in east coast USA, GA Alright give me just a few gotta power miner back on and ill config it to antpool. I just like eobot because it shows the amount of currency im getting/second VS just bunchs of numbers and letters Tongue

Antpool is very easy to use/understand. It will have speed graph of speed and at top 10min, 30min, 1 hour, and 1 day speeds. And balance at top. All very quick to get info.

Also you can use PPLNS - 0% or PPS - 2.5% . Hard to beat a pool with both and it's a option not to mention the percents are nice.

Happy Mining!

awesome

Sigh updating miner config to Antpool still results in nothing :/
Red and green light still steady, the green ethernet light flashing orange ethernet steady

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: cody0520 on June 29, 2015, 08:14:17 PM

Quote from: notlist3d on June 29, 2015, 07:48:18 PM

Quote from: notlist3d on June 29, 2015, 07:48:18 PM

Mmk since im using a Macbook pro i cant figure out how to screenshot the status page, but the status page is blank no information is showing

Are you in us? I'm going to assume yes but if not this needs a little tweaking for possibly different server.

Instead of eobot lets go over to a real pool. I suggest trying antpool, sign up here - https://www.antpool.com/home.htm

You will need the worker name. I blacked mine out but it will be workername.something. For example if worker name is cody, then a example is cody.s3 .

Below is one of my configs to show a working one.

Click for full size - http://i100.photobucket.com/albums/m25/notlist3d/pool_zps7c2let1r.jpg

If you have trouble just let me know with what part.

Yea im in east coast USA, GA Alright give me just a few gotta power miner back on and ill config it to antpool. I just like eobot because it shows the amount of currency im getting/second VS just bunchs of numbers and letters Tongue

Antpool is very easy to use/understand. It will have speed graph of speed and at top 10min, 30min, 1 hour, and 1 day speeds. And balance at top. All very quick to get info.

Also you can use PPLNS - 0% or PPS - 2.5% . Hard to beat a pool with both and it's a option not to mention the percents are nice.

Happy Mining!

cody0520

newbie

Activity: 12

Merit: 0

Got a miner, The s3 still isnt mining

cody0520

newbie

Activity: 12

Merit: 0

http://i100.photobucket.com/albums/m25/notlist3d/pool_zps7c2let1r.jpg

Mmk since im using a Macbook pro i cant figure out how to screenshot the status page, but the status page is blank no information is showing

Are you in us? I'm going to assume yes but if not this needs a little tweaking for possibly different server.

Instead of eobot lets go over to a real pool. I suggest trying antpool, sign up here - https://www.antpool.com/home.htm

You will need the worker name. I blacked mine out but it will be workername.something. For example if worker name is cody, then a example is cody.s3 .

Below is one of my configs to show a working one.

Click for full size - http://i100.photobucket.com/albums/m25/notlist3d/pool_zps7c2let1r.jpg

If you have trouble just let me know with what part.

Yea im in east coast USA, GA Alright give me just a few gotta power miner back on and ill config it to antpool. I just like eobot because it shows the amount of currency im getting/second VS just bunchs of numbers and letters Tongue

notlist3d

legendary

Activity: 1456

Merit: 1000