Topic: S5 problems - need help !!! - page 2. (Read 2085 times)
I would try another pool as first pool.And S1 and S3 had similar problems when I changed pool/worker settings and didn't boot them.
That's what I do. Do you think I have a result if i write and SD-S5-20150415.tar.gz?
Honestly I cannot say as I am not there looking at it. But i would follow the two guides in https://bitcointalksearch.org/topic/m.11398830 .
The first one is very good about checking cables making sure they are right (I have a feeling they are, but does not hurt to check). The second one is dealing with flashing firmware and one reason I like it is that makes sure to check keep settings (makes your life easier).
And I still think PSU could be worth trying nicer one if that does not do it. If you have a nicer PSU sitting around I would actually try it first.
That's what I do. Do you think I have a result if i write and SD-S5-20150415.tar.gz?
Is new, this is :
http://www.aliexpress.com/item/Bitcon-Miner-Antminer-S5-1TH-Asic-Miner-1150GH-Super-Btc-Miner-Better-Than-Dragon-Miner-and/32276494932.html
Tomorrow I will try with a source of 62.5 A at 12 V.
I do not understand why ASIC status is OK, why the temperature is zero and no hashing ?
Must try to write SD-S5-20150415.tar.gz ?
http://www.aliexpress.com/item/Bitcon-Miner-Antminer-S5-1TH-Asic-Miner-1150GH-Super-Btc-Miner-Better-Than-Dragon-Miner-and/32276494932.html
Tomorrow I will try with a source of 62.5 A at 12 V.
I do not understand why ASIC status is OK, why the temperature is zero and no hashing ?
Must try to write SD-S5-20150415.tar.gz ?
I would not say new from aliexpress. The seller bought it from bitmain and have been running it. Technically you bought from third party seller. From their pictures it could be as old as January. Also they are using a higher quality power supply then you were, they are using a gold COUGAR-GX cannot tell watts though from angle.
I would try a nicer PSU and see if any better luck. And if that does not work look at two guides I posted.
Is new, this is :
http://www.aliexpress.com/item/Bitcon-Miner-Antminer-S5-1TH-Asic-Miner-1150GH-Super-Btc-Miner-Better-Than-Dragon-Miner-and/32276494932.html
Tomorrow I will try with a source of 62.5 A at 12 V.
I do not understand why ASIC status is OK, why the temperature is zero and no hashing ?
Must try to write SD-S5-20150415.tar.gz ?
http://www.aliexpress.com/item/Bitcon-Miner-Antminer-S5-1TH-Asic-Miner-1150GH-Super-Btc-Miner-Better-Than-Dragon-Miner-and/32276494932.html
Tomorrow I will try with a source of 62.5 A at 12 V.
I do not understand why ASIC status is OK, why the temperature is zero and no hashing ?
Must try to write SD-S5-20150415.tar.gz ?
Hi Guys !
I just got a new S5 and have the following problem:
What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ).
After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping.
I really need help, if the equipment is damaged you have to send it back.
Thanks !!
I just got a new S5 and have the following problem:
What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ).
After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping.
I really need help, if the equipment is damaged you have to send it back.
Thanks !!
Did you get it new from bitmain?
The PSU seems pretty cheap might try another one if you have it. If that does not work look over here to check PCB- https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB
And if still nothing I would look into flashing with firmware. A example of that is here - https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S
My File System Version is : Wed Jan 7 14:05:02 CST 2015. I must write SD-S5-20150415.tar.gz ?
Hi Guys !
I just got a new S5 and have the following problem:
What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ).
After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping.
I really need help, if the equipment is damaged you have to send it back.
Thanks !!
I just got a new S5 and have the following problem:
What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ).
After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping.
I really need help, if the equipment is damaged you have to send it back.
Thanks !!
check the software on SD card. maybe reinstall if you bought used.
https://www.bitmaintech.com/support.htm?pid=00720150101032800325X8cMcY2y068F
Hi Guys !
I just got a new S5 and have the following problem:
http://oldav.ro/econt/fish/s5.jpg
What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ).
After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping.
I really need help, if the equipment is damaged you have to send it back.
Thanks !!
I just got a new S5 and have the following problem:
http://oldav.ro/econt/fish/s5.jpg
What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ).
After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping.
I really need help, if the equipment is damaged you have to send it back.
Thanks !!
Jump to: