you know the power consumption? real power consumption
For a 9 card rig, the power meter at the wall reads 464 watts.
Could you tell me your Claymore parameters, please?
Topic: Sapphire RX550 4GB - how to get 14MH/s? - page 2. (Read 793 times)
For a 9 card rig, the power meter at the wall reads 464 watts.
Could you tell me your Claymore parameters, please?
mmm, lower that core,by 1030/875 ?
dcri 6 isn't exactly the number I got written down, are you Dual mining or not ?
dcri 6 isn't exactly the number I got written down, are you Dual mining or not ?
you know the power consumption? real power consumption
For a 9 card rig, the power meter at the wall reads 464 watts.
i set Claymore 11.7 with these parameters: -mode 1 -asm 2 -dcri 6 -etha 1 -ethi 12
then core 1200 and memory 2000. and yeeees ive got 14 - 14,2 MH/s. ..... but very high temperature, 68C and 98%fan.. should it be better?
then core 1200 and memory 2000. and yeeees ive got 14 - 14,2 MH/s. ..... but very high temperature, 68C and 98%fan.. should it be better?
I have 18 Asus RX 550 4GB cards. They are all Hynix memory. 14 get 14.1 -14.4 MH/s, the other 4 get between 12.5 and 13.8 MH/s.
GPU: 1200 MHz / 900 mV
Mem: 2000 MHz / 900 mV
Bios modded!
GPU: 1200 MHz / 900 mV
Mem: 2000 MHz / 900 mV
Bios modded!
you know the power consumption? real power consumption
to skablast:
Yes, i unlocked CU with SRBpolaris v3.4, then i apply 1500+ straps in srbpolaris, and flash bios. I will play with claymore 11.4 or 11.6 and improve OC now, thanks.. wish me luck
to whoismoses:
its great, ill try your clocks, thanks
Yes, i unlocked CU with SRBpolaris v3.4, then i apply 1500+ straps in srbpolaris, and flash bios. I will play with claymore 11.4 or 11.6 and improve OC now, thanks.. wish me luck
to whoismoses:
its great, ill try your clocks, thanks
I have 18 Asus RX 550 4GB cards. They are all Hynix memory. 14 get 14.1 -14.4 MH/s, the other 4 get between 12.5 and 13.8 MH/s.
GPU: 1200 MHz / 900 mV
Mem: 2000 MHz / 900 mV
Bios modded!
GPU: 1200 MHz / 900 mV
Mem: 2000 MHz / 900 mV
Bios modded!
You unlocked the cu with srbpolaris ?
Have you pimped your timing ?
Claymore starting with 11.4 does have a better kernel for baffin
did everything ?
ok, now you launch claymore mining ethereum only and let it figure out the intensity 8/12 that's the range
Then: you run hw info and look for no error, if no error increase the memory.
Now you dual mine xvg!
Put the same -dcr with the same number Claymore suggest for "Ethereum only"
+- 1
and TA - DA!
you will get around 14.5
unless I forgot something..
got 3 baffin with micron, don't worry you will get that
Have you pimped your timing ?
Claymore starting with 11.4 does have a better kernel for baffin
did everything ?
ok, now you launch claymore mining ethereum only and let it figure out the intensity 8/12 that's the range
Then: you run hw info and look for no error, if no error increase the memory.
Now you dual mine xvg!
Put the same -dcr with the same number Claymore suggest for "Ethereum only"
+- 1
and TA - DA!
you will get around 14.5
unless I forgot something..
got 3 baffin with micron, don't worry you will get that
its micron memory. 
With 2 cards, rig was stable 13.3MH/s per card, but after i add third card its unstable about 11-13.2MH/s ,
and after some hours there is error: Watchdog: GPU hangs in OpenCL call, exit error.
and sometimes BSOD
With 2 cards, rig was stable 13.3MH/s per card, but after i add third card its unstable about 11-13.2MH/s ,
and after some hours there is error: Watchdog: GPU hangs in OpenCL call, exit error.
and sometimes BSOD
I think only samsung memory could give you 14mh/s because in rx 570 and rx 580 if your card is samsung memory you can get higher hashrate.
Try to use the GPU-z and check if what memory type of your card.
If your memory card is hynix you get low hashrate and micron memory could give you around 11 to 13 mh/s.
Try to use the GPU-z and check if what memory type of your card.
If your memory card is hynix you get low hashrate and micron memory could give you around 11 to 13 mh/s.
yes, i unlocked compute units already. 10CU before, and after unlock 12 CU.
I know what baffin's can unlock gpu units.
You do that ? Maybe there is the secret.
Before i thik 550 can give 10-11mh only
You do that ? Maybe there is the secret.
Before i thik 550 can give 10-11mh only
Lexa or Baffin ? Mining what with which miner ?
Wrote down the setting here, and may be, someone will help
Wrote down the setting here, and may be, someone will help
Baffin. Mining with Claymore 10.6.. I tried Claymore 11.6. but i ve got only 12mh/s with that.
I set GPU clocks 1124MHz and 2000MHz for memory.
I saw photo with mining rig with 5x Rx550 with hashrate 72MH/s (14,5MH/s per card).
Just because someone has it working at 14mh does not mean that is the norm. Its all very specific to the parts used to construct your card, you should be happy with 13mh on that junker
Depends on each card man, it's not a exact science
13mhs is very good on a 550
13mhs is very good on a 550
Lexa or Baffin ? Mining what with which miner ?
Wrote down the setting here, and may be, someone will help
Wrote down the setting here, and may be, someone will help
Hi guys, i have searched on this website and found many guys, who was able to get hashrate about 14MH/s with RX550. Please help, how can i reach that?
I did bios mod - 1500straps, shaders unlocked, OC => and it equals hashrate about 13MH/s, but not stable.
Could you give me some tips, what to do better?
I did bios mod - 1500straps, shaders unlocked, OC => and it equals hashrate about 13MH/s, but not stable.
Could you give me some tips, what to do better?
Jump to: