Pages:
Author

Topic: Scrappy's Farm Cleaning! S7, S3, S3+, Fan's, Shroud's, PSU's and APW3++'s! (Read 567 times)

copper member
Activity: 38
Merit: 0
Any price to take 2 T9's offline right now?
newbie
Activity: 14
Merit: 0
What you got for GPUs?
newbie
Activity: 26
Merit: 0
hero member
Activity: 686
Merit: 500
Hi, How much are you asking for the Dell 750 watt psu's with the break out boards and cables ?

 Give me a few days to pull them out and test them and I will let ya know. I wanna say I have 4 of them. I have the long and short cables. Do you know how many of those you will need? I do know only 1 of them has the quiet fans on it. I think this can be changed on the breakout board though. Would have to ask Sidehack. I think he still has info on his site somewhere.

Scrap'
member
Activity: 97
Merit: 10
Hi, How much are you asking for the Dell 750 watt psu's with the break out boards and cables ?
member
Activity: 266
Merit: 13
I’m waitin for next month.
hero member
Activity: 686
Merit: 500
(or he could put it on eBay and get about $1100 from it; even after fees he'd still come out about $100 farther ahead)

 Or I could beg you to Sidehack them and be ready for next winter as well. Smiley This would be way beyond the scope of the hater/troll/timk225. Too much thinking.

 You did notice those Sidehacked s7's ain't up there right? I'd buy 20 more right now at the price I got mine for in November.

Scrap'
hero member
Activity: 686
Merit: 500
$850 for an S7 that was obsolete years ago is outrageously overpriced.  You are a miserable money grubbing profit taking BASTARD.  I urge everyone to not buy anything he is selling.

 Ya know.. That hurt my feelings. Give me a minute to recover.

...

...

/sniffle

 Actually it didn't! In fact the machine still makes money at this current BTC Rate. One thing people fail to consider is sometimes even if a machine is breaking even vs. electric, or even yet losing but not insane, what will that BTC be worth in 6 months?

 Now just imagine if this guy is actually heating your house/barn/shed/dogs.... its free BTC.

 To call the machine obsolete let me know you haven't a damn clue what you speak.

 Therefore, I have since rethought my tears and decided you are a total idiot. LOL

 BTW.. Like Sidehack said, I could always ebay them. I would prefer a Crypto exchange so no paypal trace nor chargeback bullshit.

Scrap'
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
(or he could put it on eBay and get about $1100 from it; even after fees he'd still come out about $100 farther ahead)
full member
Activity: 420
Merit: 110
$850 for an S7 that was obsolete years ago is outrageously overpriced.  You are a miserable money grubbing profit taking BASTARD.  I urge everyone to not buy anything he is selling.
Says the guy with  -16 trust. Classic.
hero member
Activity: 955
Merit: 1004
$850 for an S7 that was obsolete years ago is outrageously overpriced.  You are a miserable money grubbing profit taking BASTARD.  I urge everyone to not buy anything he is selling.
hero member
Activity: 686
Merit: 500
Hey Scrappy.

I'd like to purchase 6 pcs of the shrouds, but I need those 5 inches not 4".

Do you have any?

I read somewhere that the 5" and 6" can disperse the heat way better than 4".

pls advise if you have any 5" or 6" shrouds?


 I do not. Please check with camelhackx on ebay as he is very good at it. I am only reselling exactly what I bought from him. I will not make money off his designs or patterns. I simply want to sell what I have.

Scrap'

 To add to this, Watch Camel's youtube and you will see a 4 inch is just as efficient as the 5 inch due to the fan. It's still 120mm... no matter how big the opening. Smiley If your in the US, stick with the 4 inch. Forget the other BS you read on the intraweb.

Scrap'

Thanks S.D. for your reply.

The 5" or 6" shrouds were recommended by this good felllow - Raymond B. in his thread "Ducting", located inside mining support thread.

Link: https://bitcointalksearch.org/topic/ducting-2796117



 Ok, Im not gonna critique his farm as it is awesome!

 I do not run said configuration, and run WAY more miners than that. My typical hose is 4 inches and direct out. I can see where a 6 inch would be needed for that distance. I'm doing straight the hell out. 4 inch works fine, trust me.

 If your gonna constrict/bend/bind/run 3-7 frigging foot of duct. I GET IT!

Scrap'
member
Activity: 684
Merit: 19
Hey Scrappy.

I'd like to purchase 6 pcs of the shrouds, but I need those 5 inches not 4".

Do you have any?

I read somewhere that the 5" and 6" can disperse the heat way better than 4".

pls advise if you have any 5" or 6" shrouds?


 I do not. Please check with camelhackx on ebay as he is very good at it. I am only reselling exactly what I bought from him. I will not make money off his designs or patterns. I simply want to sell what I have.

Scrap'

 To add to this, Watch Camel's youtube and you will see a 4 inch is just as efficient as the 5 inch due to the fan. It's still 120mm... no matter how big the opening. Smiley If your in the US, stick with the 4 inch. Forget the other BS you read on the intraweb.

Scrap'

Thanks S.D. for your reply.

The 5" or 6" shrouds were recommended by this good felllow - Raymond B. in his thread "Ducting", located inside mining support thread.

Link: https://bitcointalksearch.org/topic/ducting-2796117

hero member
Activity: 686
Merit: 500
Hey Scrappy.

I'd like to purchase 6 pcs of the shrouds, but I need those 5 inches not 4".

Do you have any?

I read somewhere that the 5" and 6" can disperse the heat way better than 4".

pls advise if you have any 5" or 6" shrouds?


 I do not. Please check with camelhackx on ebay as he is very good at it. I am only reselling exactly what I bought from him. I will not make money off his designs or patterns. I simply want to sell what I have.

Scrap'

 To add to this, Watch Camel's youtube and you will see a 4 inch is just as efficient as the 5 inch due to the fan. It's still 120mm... no matter how big the opening. Smiley If your in the US, stick with the 4 inch. Forget the other BS you read on the intraweb.

Scrap'
hero member
Activity: 686
Merit: 500
can you tell us the loacation of your Miner? Do you send to Europe?

 I am in the US. More specific... Arkansas.

 I will send anywhere if your willing to pay for it. Smiley

 I am very easy to deal with.

Scrap'
hero member
Activity: 686
Merit: 500
Hey Scrappy.

I'd like to purchase 6 pcs of the shrouds, but I need those 5 inches not 4".

Do you have any?

I read somewhere that the 5" and 6" can disperse the heat way better than 4".

pls advise if you have any 5" or 6" shrouds?


 I do not. Please check with camelhackx on ebay as he is very good at it. I am only reselling exactly what I bought from him. I will not make money off his designs or patterns. I simply want to sell what I have.

Scrap'
member
Activity: 684
Merit: 19
Hey Scrappy.

I'd like to purchase 6 pcs of the shrouds, but I need those 5 inches not 4".

Do you have any?

I read somewhere that the 5" and 6" can disperse the heat way better than 4".

pls advise if you have any 5" or 6" shrouds?
member
Activity: 188
Merit: 13
can you tell us the loacation of your Miner? Do you send to Europe?
hero member
Activity: 686
Merit: 500
Can't imagine where all those CPU coolers came from. Or all those Technobit boards. /sarcasm

 Thinking about it though SH... If I were to pull them, that would be some kick ass jewelry would it not? Hell I still have some Cointerra chips, and they pretty too. I need to find a belt maker and make a 100k belt out of chips. Smiley

Scrap'
hero member
Activity: 686
Merit: 500
Can't imagine where all those CPU coolers came from. Or all those Technobit boards. /sarcasm

 Wow! You know it cost me.... YOU KNOW. Taking me 3 years to even make a semi comeback. That Mother Fucker Martin (I would love to meet his ass in real life) Cost me close to $45k USD at the time when BTC was.... Please don't piss me off bro. You know... you know....

 Guys support SH, hes one of the best out there.. always take care of ya. Even when I was down, his ass would send me sales to come back. Not many out there who would do the same!

 Scrap'
Pages:
Jump to: