Received mine today, they are top quality and to my great surprise there are spades on the end of the cables making my life very easy!
Top quality work!!
Topic: Server Power Supply Interface Board - for standalone miners and GPU rigs - page 18. (Read 120772 times)
February 15, 2014, 07:25:46 PM
February 15, 2014, 07:22:39 PM
How do I go about ordering a few boards 
I PM'ed sidehack,no response....yet......... 
Also what AWG is best for Antminers
Thanks!!!!!!!!!
I PM'ed sidehack,no response....yet......... Also what AWG is best for Antminers
Thanks!!!!!!!!!
if using 3 wire pairs (3 12V, 3 GND) per blade, 16 or 18 AWG will work. be careful of 20AWG
if using 2 wire pairs (2 12V, 2 GND), 14 or 16 AWG - avoid 18AWG
if using 1 wire pair -> use 14AWG. 16AWG will get warm.
Thanks for the info
I'll go with the thickest (14),just to be safe
I have a lot of PCIE 6pin males left over from a frozencpu purchase 
I made cables for 11 Klondikes & they worked great!!
Double & triple ends:
February 14, 2014, 05:27:37 PM
I've got an Ant running off three-wire 20AWG, 12" long. It's nonideal.
February 14, 2014, 05:11:51 PM
How do I go about ordering a few boards I PM'ed sidehack,no response....yet.........
Also what AWG is best for Antminers
Thanks!!!!!!!!!
I PM'ed sidehack,no response....yet......... Also what AWG is best for Antminers
Thanks!!!!!!!!!
if using 3 wire pairs (3 12V, 3 GND) per blade, 16 or 18 AWG will work. be careful of 20AWG
if using 2 wire pairs (2 12V, 2 GND), 14 or 16 AWG - avoid 18AWG
if using 1 wire pair -> use 14AWG. 16AWG will get warm.
February 14, 2014, 11:35:37 AM
Not really, at present. How many would you need? When sales open, boards and cables will be sold as separate units so you can buy one, the other, or both.
February 14, 2014, 03:27:52 AM
Do you have any extra PCI-E power cables for sale?
February 13, 2014, 08:09:44 PM
Quote
I'm going to close orders for now ... no further orders will be accepted until the current ones are filled and stock is built back up.
I just shipped the last boards we had ready to roll. We're gonna finish out the run before opening orders again. It'll be at least a week, maybe more.
Thanks for replying
I can wait,not gonna need em for at least 2 weeks anyhow
Doh...just saw a link in your sig
That where we order from later http://www.gekkoscience.com/
Thanks!!!!!!!!
February 13, 2014, 08:06:05 PM
Quote
I'm going to close orders for now ... no further orders will be accepted until the current ones are filled and stock is built back up.
I just shipped the last boards we had ready to roll. We're gonna finish out the run before opening orders again. It'll be at least a week, maybe more.
February 13, 2014, 07:59:18 PM
How do I go about ordering a few boards I PM'ed sidehack,no response....yet.........
Also what AWG is best for Antminers
Thanks!!!!!!!!!
I PM'ed sidehack,no response....yet......... Also what AWG is best for Antminers
Thanks!!!!!!!!!
February 12, 2014, 07:39:21 PM
Hey, how is my order doing? I never received any confirmation...
February 12, 2014, 10:37:11 AM
Got mine yesterday.. They look great! Packaging and included instructions seem top notch. Going to test them out this evening
February 11, 2014, 10:24:06 PM
Yes. I have a few orders placed that haven't paid yet, and anyone that has paid already, are in the first group and your order will ship as soon as all stock is available. If you only ordered boards, it should be immediate; orders with cables will be shipped as the supply is made available.
I am ready to pay the second you have cables for my 6 boards.
Do you still plan to have them in the next day or so??
February 09, 2014, 10:28:08 PM
Yes. I have a few orders placed that haven't paid yet, and anyone that has paid already, are in the first group and your order will ship as soon as all stock is available. If you only ordered boards, it should be immediate; orders with cables will be shipped as the supply is made available.
That's great. Yeah you warned me at least when I was PMing you that any order with cables would delay it until the end of the week.
That's still fine with me. Thanks again!
February 09, 2014, 10:19:10 PM
Yes. I have a few orders placed that haven't paid yet, and anyone that has paid already, are in the first group and your order will ship as soon as all stock is available. If you only ordered boards, it should be immediate; orders with cables will be shipped as the supply is made available.
February 09, 2014, 10:12:49 PM
I'm going to close orders for now. We've made a good pile of cables this weekend, but will be probably the rest of the week filling the current orders. Taking time to make cables has slowed board manufacture a bit but that should be up to speed soon regardless of cable time.
In any case, if you've placed an order already it'll ship before the end of the week (you will have been told about this delay due to cable stock while placing the order); no further orders will be accepted until the current ones are filled and stock is built back up. Probably in about a week.
In any case, if you've placed an order already it'll ship before the end of the week (you will have been told about this delay due to cable stock while placing the order); no further orders will be accepted until the current ones are filled and stock is built back up. Probably in about a week.
Thanks for the update! So if we paid already, we're in the first grouping yes?
February 09, 2014, 09:49:41 PM
What is everyone's solution to cool the huge Delta DPS models like the 1500 and 2000? Some turbine props pushing tons of CFM?
Four fans, taped two to each side. I was using cheaper case fans, but they would still overheat when I really pushed them (12 gpus per 2000w supply
) I'm now upgrading to some more powerful delta fans, at least on a few of them. This should only take one or two per pair of PSUs. February 09, 2014, 09:41:36 PM
I'm going to close orders for now. We've made a good pile of cables this weekend, but will be probably the rest of the week filling the current orders. Taking time to make cables has slowed board manufacture a bit but that should be up to speed soon regardless of cable time.
In any case, if you've placed an order already it'll ship before the end of the week (you will have been told about this delay due to cable stock while placing the order); no further orders will be accepted until the current ones are filled and stock is built back up. Probably in about a week.
In any case, if you've placed an order already it'll ship before the end of the week (you will have been told about this delay due to cable stock while placing the order); no further orders will be accepted until the current ones are filled and stock is built back up. Probably in about a week.
February 09, 2014, 12:50:18 PM
Do-want schematics.
http://www.rcgroups.com/forums/showthread.php?t=1292514
start here schematics on a few were found, warning very long a day type threads.
Kudos! Thanks man.
February 09, 2014, 02:05:38 AM
What is everyone's solution to cool the huge Delta DPS models like the 1500 and 2000? Some turbine props pushing tons of CFM?
February 08, 2014, 11:38:22 PM
Do-want schematics.
http://www.rcgroups.com/forums/showthread.php?t=1292514
start here schematics on a few were found, warning very long a day type threads.
Jump to: