Topic: Setting up new Rigs... Questions (Read 331 times)

The videos above are from October.  The firmware allowing the full load of GPUs was released in November.

See FAQ/1034921 on the Asus web site.   This November FAQ announces the firmware allowing use of all the Gpu slots

Have you tried the latest BIOS  v403 Dated 12/15/2017?  (With bug fixes to the November drop.)  Are you running the November 1 version of the chipset driver?

Are you running the November AMD drivers?  Their release by amd seems to be critical.

I can not find a requirement or suggestion to use the p106 GPU in any FAQ or the manual.  The manual does show an example configuration with 8 p106 cards but that was only an example that mixed Nvidia and Amd cards are allowed.

The overview has a note stating that until drivers are updated the number of GPUs is limited and that the update is scheduled for 4th qtr 2017.



There are notes in the manual on memory.  Asus recommends 2 4GB memory modules for systems with more than 8 GPUs and an initial paging file size 30GB for stability.

There are also operational memory limits.   With a 6th gen CPU the 2400Mhz memory will be used as 2133Mhz memory  (save money and use 2133MHz memory with 6th generation CPUs


The BIOS memory compatibility list and manual are available at:
https://www.asus.com/us/Motherboards/B250-MINING-EXPERT/HelpDesk_Download/


I would call Asus product support before spending money on a solution that worked for a guy on youtube.  It worked for him but may not be the global solution.  



https://www.asus.com/us/Motherboards/B250-MINING-EXPERT/

You can probably can, but IMO there is no good reason for doing that since the P106 cards are overpriced to begin with and you are also making the build configuration more complicated by mixing different drivers and cards.

If I am doing 16GPU rig can I set up 13 AMD in each and 3 P106?

Thank you for any assistance.

The P106 mining cards are overpriced for what they are, a 1060 with limited to no resale value. I would reconsider and go with better options, like the ASRock H110 Pro BTC+ and run 13 card rigs.

https://www.youtube.com/watch?v=miUoqnUqk9M&feature=youtu.be&t=2014

sorry didnt knw abouzt that nvidia stuff..

best advice i can give u is, never stop learning in crypto, learning by doing, never stop reading this forum.. at some point when u will be mining for few months u may think ok i got it..NO fuck no its just the tip of the iceberg..trust me

Thank you, I now need to try to find a supplier for 24 P106 cards.

i dont know where you can read about it, i just know from experience

on linux it is your swap file

Can you point out where I can read about virtual memory requirement for those , also is it applicable to both linux and windows ?

You NEED to use Nvidia P106 mining cards for more than 13 GPU's on the Asus B250 mining expert. Nvidia/AMD, Windows/Linux it doesn't matter, the Asus B250 REQUIRES the Nvidia P106 mining cards NOT 1060 for more than 13 cards. Watch this video BBT goes over his B250 mining expert 19 card setup why you need to use the P106 mining cards with more than 13 cards.

https://www.youtube.com/watch?v=0R2OKKmCzzc

https://youtu.be/h-ZEPjoFh2I?t=259

Asus was supposedly going to release an update to bypass the requirement to be able to use 19 regular cards, but I wouldn't hold my breath.

On a different note... anyone knows what's up with Awesome Miner?  For some reason, my hash rate on my 1070 is screwed up but I'm afraid to reboot it cause if it's true I want that coin.  I just started playing with Awesome Miner the last few days and it's been averaging about $5.50 a day and today it went crazy.

https://imgur.com/7HEh9tF

bulllshit if u run 18gpus / rig a 120gig ssd will not be enough for virtual memory on cryptonight and equihash aswell

Atleast 8GB ram stick per RIG is adviced as you won't save much with 4GB. Still 4G will be fine for most of the time.
I don't think you really need powerful CPU as its more about CPU , even intel G4400 will do nice for any rig.


However, the thing you need to know is that modding and tuning all those RX580 could be pain in ass , that I learned hard way.
If you are lucky, all have SAMSUNG memory then will be quite easy , if they are mix like Elpida, Hynix then you will have little hard time tuning all and finding stable set.

And choose OS in which you are comfortable, but somehow windows is apt for modding thing.. I find myself quite familiar with linux  (and my preferred)  but setting up RX580 with modding and fine tuning) is real pain in ass with linux. But for Nvidias, its cool . However, there are other linux mining os like SimpleMining etc. check them in other threads.

Lastly, always have a spare test rig or motherboard, it will help you to reduce downtime as you add new card or fine tune a existing one.

And yes, 120 GB SSD is more than enough, you can even do away with 32 GB USB drive (and is strongly advised if you are linux)

And get a "KIllawatt" meter just for making sure you have your rig working as you needed.

you can even use nvidia and amd in the same rig....

@treanski I wish I could afford 1080TI but unfortunately, it's not in my budget for what I'm building.

I want to make sure I can use 1060 in place of the p106-100 cause I can't return them if they don't work with that motherboard.

Allegro have complet sets probably ebay also try search.

the asus b250 can handle 19 gpus, why dont you go for them?

and regarding 1060, i dont have nvidia but i dont think there is a big differenece betweed the p106 and the "gaming" gpus it will work

i personaly i would not go for the 1060...they do around 300sols@equihash but only 600@cryptonight.
if u want to go for nvidia, then do it right and go for 1080ti, much more pofitable in the long run

rx580 can do also 300+sols@equihash but with good biosmod 900-1000hs@cryptonight, 29-30@daggerhashimoto

@treanski I have the purchase order for 48 AMD RX 580 but I'm trying to figure out how to set things up now.  I need to transfer the money tomorrow but it's got me wondering how to move forward.

I have two investors and I am to make 3 full rigs with 16 GPU Each. 

Do I change my order to 24 AMD (finding a reputable source for 48 of them was hard enough) and try to find a supplier to sell me 24 P106 or should I try to split things up and run the 6 TB250-BTC+ Ver. 6.x that handles 8 GPU each.. problem I'm having there is finding those Motherboards.  I can find the 13gup and the 6 GPU versions but I can only find the 8 GPU versions on the manufacturer's website no one I can find sells them.

As I add additional motherboards the cost goes up.

Also, a question, if I can get the Nvidia 1060, will that work in place of the P106 since they are essentially the same graphics cards. 

Sorry for being stupid there but I don't want to screw it up.

i would recommend you to buy a i3 or i5 cpu and 8gbram or more, because u will not always stick to one coin or one algo.
there are coins that need share verification on cpu, or the miner need alot of Ram. You wont find this coins on whattomine, but maybe sometime you will learn whats really profitable

i bought a cheap celeron because everybody said fuck the cpu, i wont do it again

@treanski I was just asking if 8gb of ram on the motherboard was necessary.  

Since I screwed up and bought all the AMD cards and my plan was to build 3 rigs I need to figure out money

I'll have to buy additional motherboards to use all AMD cards, GPU, Power... I was looking for a few cost-cutting ideas and was curious if 8 gigs is overkill on something that basically does all its work with the GPU.  If not I will buy more ram.  

That would be 4 gigs on each motherboard not 8 total between all of them.

If I wanted cheap I would just go to China and buy a fake 1080 TI for $65.  I'm not doing that and spending a lot on all of the cards.