Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 130. (Read 452359 times)

Ok but cgminer is not working.

Your not mining through a proxy are you?

I am using the latest IE.  I did change the computer back.  Now when it is hooked up to the router, I have no problem logging in.

If your getting the message then your hitting the server on the miner...the miner is just not responding.

Which web browser are you using and what are the settings.

Another thing is that you need to change your comp back to dynamic ip address settings.

Did the reset, and I still get the same black screen

Yeah. I changed a couple settings and could figure out what was going on, so I hit the reset button and power cycled and started over.

The miner?

Try resetting?

When the miner is hooked up to the router, I have no problem logging in, through the browser.  I have all of my settings, but then I get this error:   

Wed Jan 15 20:25:27 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Wed Jan 15 20:25:27 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Wed Jan 15 20:25:57 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Wed Jan 15 20:25:57 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Wed Jan 15 20:26:27 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Jan 15 20:26:27 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Jan 15 20:26:57 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Jan 15 20:26:57 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Wed Jan 15 20:27:01 2014 cron.info crond[576]: crond: USER root pid 3633 cmd /usr/bin/cgminer-monitor
Wed Jan 15 20:27:03 2014 daemon.info sysinit: Alarm clock

I went to the troubleshoot and attempted to use those 4 addresses.   I still get those errors. 

When it is hooked up to the computer, it gives that previous error, when i put the miner address in the browser.  Black screen and those letters.

It's probably going to be a pain in the ass, but the easiest way to do this is to connect the miner to the router via ethernet cable, login to the router on your computer, get the ip address from the router, and put the ip address into your browser.

Can you log into the miner that way?

I am trying to log into the miner. 

192.168.2.254 computer.

I am directly connected to the computer.

What IP are you trying to log into? What's the IP of your computer/router? Are you directly connected?

I did change the ip address.  I did reboot.  When I put in the miner address, i get a "LuCI - LUA Configuration Interface" message.  The message stays on the screen for a couple of seconds, then "ie says page cannot be displayed"

You should do a reboot after doing this.

Did you do this step?

I did.  When I connect my miner to my laptop, after the configuration, and attempt to log in, I get a black screen and then no connection.

Follow all the instructions at the beginning of this thread.

Good Evening,

I just received my miner today.  YEAHHHHH.  Now the set up part is killing me.  Cgminer keeps getting hung up.  I have tried to the troubleshoot, but I still see trouble.  Assistance please.

When I go through the process of hooking up my miner, ethernet, to my computer, and change the IP address.  I cannot access the miner.  Any thoughts?

Bridging the connections worked as well.

Just checked, this worked for me. Can log in wirelessly, held the setting through a power cycle, no issues.

Yes, but not overclocked. Separate modular PCIe connectors for each blade. (I think the PSU only ships with 4 but you can get more or retrofit a MB connector)