Quote
When you open safedice in your browser, do you need to complete a captcha? If so, the bot will be unable to log in there.
Yes it is. What can I do? 
Topic: Seuntjies DiceBot -Multi-Site, multi-strategy betting bot for dice. With Charts! - page 69. (Read 274841 times)
March 13, 2017, 12:41:45 PM
March 13, 2017, 01:05:09 AM
are there any known issues with using Labouchere? I've run a couple of tests, but the bot doesnt seem to be doing the sequence correctly. For instance, using a sequence of 10-20-30-40, if you lose the first 4 rolls, the bet sequence should be:
50 10+40), 60 (10+50), 70 (10+60), 80 (10+70)... and the numbers in the sequence should now be: 10,20,30,40,50,60,70,80
if you win the next 3 rolls, the bets should be 90 (10+80), 90 (20+70), 90 (30+60) and the remaining numbers should be 40,50.
however, it seems like the bot bets 90, and if you win it then just resets the entire sequence after the first win and goes back to very initial bet 50.
The upshot of this is that the sequence never completes and the bot will just bet forever (while slowly losing money
)
50 10+40), 60 (10+50), 70 (10+60), 80 (10+70)... and the numbers in the sequence should now be: 10,20,30,40,50,60,70,80
if you win the next 3 rolls, the bets should be 90 (10+80), 90 (20+70), 90 (30+60) and the remaining numbers should be 40,50.
however, it seems like the bot bets 90, and if you win it then just resets the entire sequence after the first win and goes back to very initial bet 50.
The upshot of this is that the sequence never completes and the bot will just bet forever (while slowly losing money
)Check your stop conditions tab. Do you have the bot set to reset after 1 win?
March 13, 2017, 01:02:37 AM
Hi, I can not go to Safedice. Before he could
When you open safedice in your browser, do you need to complete a captcha? If so, the bot will be unable to log in there.
March 13, 2017, 01:00:53 AM
are there any known issues with using Labouchere? I've run a couple of tests, but the bot doesnt seem to be doing the sequence correctly. For instance, using a sequence of 10-20-30-40, if you lose the first 4 rolls, the bet sequence should be:
50 10+40), 60 (10+50), 70 (10+60), 80 (10+70)... and the numbers in the sequence should now be: 10,20,30,40,50,60,70,80
if you win the next 3 rolls, the bets should be 90 (10+80), 90 (20+70), 90 (30+60) and the remaining numbers should be 40,50.
however, it seems like the bot bets 90, and if you win it then just resets the entire sequence after the first win and goes back to very initial bet 50.
The upshot of this is that the sequence never completes and the bot will just bet forever (while slowly losing money)
50 10+40), 60 (10+50), 70 (10+60), 80 (10+70)... and the numbers in the sequence should now be: 10,20,30,40,50,60,70,80
if you win the next 3 rolls, the bets should be 90 (10+80), 90 (20+70), 90 (30+60) and the remaining numbers should be 40,50.
however, it seems like the bot bets 90, and if you win it then just resets the entire sequence after the first win and goes back to very initial bet 50.
The upshot of this is that the sequence never completes and the bot will just bet forever (while slowly losing money
) March 12, 2017, 08:58:56 PM
it turns out boat does not support this site safedice?
March 12, 2017, 04:17:02 PM
Hi, I can not go to Safedice. Before he could
When you open safedice in your browser, do you need to complete a captcha? If so, the bot will be unable to log in there.
Tried it out yesterday and two thoughts so far.
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
Can you please test out this beta version of the bot? https://bot.seuntjie.com/botpage.aspx?id=46
It should address both issues (changing number format and betting speed/choppyness)
I can verify that the settings for clock/time format now works in native mode
I´ve just started the betting and it seems more responsive! I´ll report back if I find anything unusual!edit* as a matter of fact, the betting seems alot faster! 700 bets in about 7 mins and 30 secs(450 secs)!
edit2* the chart however "follows" the bets. I can no longer see from bet 0. is there a setting for this? I dont like the "progressive" style
This is great news.
As for the chart, no, there is no setting for that. I will add a setting to allow you to set the number of bets to display in the chart, but it will be capped at 10 000. The reason for this is because the bot ends up using too much memory after a few thousands bets and becomes unresponsive/slow. This sliding chart should prevent that from happening and keep memory usage down.
You can however still plot charts for your whole session using the chart form. Go to view->charts->session static for a static chart of your session (since you opened the bot) until the time of clicking, or session live, which will open a new live chart that gets the new points added to it like the embedded chart used to. A word of caution about this though is that it will, once again, use up more memory to plot the chart and slow the bot down and cause it to become unresponsive after too many bets
Ah, explains alot and Yes, I did see there was a session statistics which showed what I was after but as u say, I´ll use it with caution!
Very good bot BTW, and great that you can put a stop after x number of losing streaks!
March 12, 2017, 03:46:19 PM
Hi, I can not go to Safedice. Before he could
When you open safedice in your browser, do you need to complete a captcha? If so, the bot will be unable to log in there.
Tried it out yesterday and two thoughts so far.
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
Can you please test out this beta version of the bot? https://bot.seuntjie.com/botpage.aspx?id=46
It should address both issues (changing number format and betting speed/choppyness)
I can verify that the settings for clock/time format now works in native mode
I´ve just started the betting and it seems more responsive! I´ll report back if I find anything unusual!edit* as a matter of fact, the betting seems alot faster! 700 bets in about 7 mins and 30 secs(450 secs)!
edit2* the chart however "follows" the bets. I can no longer see from bet 0. is there a setting for this? I dont like the "progressive" style
This is great news.
As for the chart, no, there is no setting for that. I will add a setting to allow you to set the number of bets to display in the chart, but it will be capped at 10 000. The reason for this is because the bot ends up using too much memory after a few thousands bets and becomes unresponsive/slow. This sliding chart should prevent that from happening and keep memory usage down.
You can however still plot charts for your whole session using the chart form. Go to view->charts->session static for a static chart of your session (since you opened the bot) until the time of clicking, or session live, which will open a new live chart that gets the new points added to it like the embedded chart used to. A word of caution about this though is that it will, once again, use up more memory to plot the chart and slow the bot down and cause it to become unresponsive after too many bets
March 12, 2017, 03:11:51 PM
Tried it out yesterday and two thoughts so far.
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
Can you please test out this beta version of the bot? https://bot.seuntjie.com/botpage.aspx?id=46
It should address both issues (changing number format and betting speed/choppyness)
I can verify that the settings for clock/time format now works in native mode
I´ve just started the betting and it seems more responsive! I´ll report back if I find anything unusual!edit* as a matter of fact, the betting seems alot faster! 700 bets in about 7 mins and 30 secs(450 secs)!
edit2* the chart however "follows" the bets. I can no longer see from bet 0. is there a setting for this? I dont like the "progressive" style
March 12, 2017, 12:38:56 PM
Hi, I can not go to Safedice. Before he could
March 12, 2017, 10:51:29 AM
Is there a way to let the bot stop on one or multiple numbers. Let's see, can I let it stop after a 99.99 or 0.00? Even without betting on 9900x.
If you use the programmer mode with the lastBet object (specifically the lastBet.Roll property) you can do this.
March 12, 2017, 08:20:28 AM
Is there a way to let the bot stop on one or multiple numbers. Let's see, can I let it stop after a 99.99 or 0.00? Even without betting on 9900x.
March 12, 2017, 03:20:29 AM
Hi seuntjie,
tried using the beta version, so far bitsler doesn't get stucked anymore, but i encountered a bug in which if you will reset the chart, (the one displayed in real time) it doesn't really reset, it only reset the graph, but the number of bets are still the same so basically the graph does not get reset.
tried using the beta version, so far bitsler doesn't get stucked anymore, but i encountered a bug in which if you will reset the chart, (the one displayed in real time) it doesn't really reset, it only reset the graph, but the number of bets are still the same so basically the graph does not get reset.
Unfortunately it still does get stuck at bitsler, just for another reason now and only on really fast internet connections...
The chart does reset but the scale doesn't, I'll get that fixed for the stable release.
March 11, 2017, 08:44:59 PM
Hi seuntjie,
tried using the beta version, so far bitsler doesn't get stucked anymore, but i encountered a bug in which if you will reset the chart, (the one displayed in real time) it doesn't really reset, it only reset the graph, but the number of bets are still the same so basically the graph does not get reset.
tried using the beta version, so far bitsler doesn't get stucked anymore, but i encountered a bug in which if you will reset the chart, (the one displayed in real time) it doesn't really reset, it only reset the graph, but the number of bets are still the same so basically the graph does not get reset.
March 11, 2017, 05:24:46 PM
Thanks for the quick response. I was not sure that here and the email is the same person. Thank you.
March 11, 2017, 05:11:27 PM
Hey.
I'm trying to use a loop in the programming mode, but it does not work (although in LUA-yes), tell me, what could be the problem?
Code:
...
local ta = {}
local ti = {}
...
if pq==pz then
pl=(r .. t .. y .. u .. i .. o)
print ('pq==pz')
for s =1, #ta, 1 do
if(ta[s]) == pl then
print (ta[s])
ti[s] = ti[s]+1
print('value+1')
else
table.insert(ta, pl)
print('in table')
end;
end;
end;
...
asking on multiple platforms isn't going to change my answer or make me answer any faster. See my email response.
March 11, 2017, 04:53:22 PM
Hey.
I'm trying to use a loop in the programming mode, but it does not work (although in LUA-yes), tell me, what could be the problem?
Code:
...
local ta = {}
local ti = {}
...
if pq==pz then
pl=(r .. t .. y .. u .. i .. o)
print ('pq==pz')
for s =1, #ta, 1 do
if(ta[s]) == pl then
print (ta[s])
ti[s] = ti[s]+1
print('value+1')
else
table.insert(ta, pl)
print('in table')
end;
end;
end;
...
March 11, 2017, 04:16:38 PM
Tried it out yesterday and two thoughts so far.
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
Can you please test out this beta version of the bot? https://bot.seuntjie.com/botpage.aspx?id=46
It should address both issues (changing number format and betting speed/choppyness)
March 10, 2017, 01:17:58 AM
Tried it out yesterday and two thoughts so far.
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
First, I have to change my computers clock etc to US (swedish is native) to get it to work, but thats already described in the FAQ that it may need to be done.
Not sure why and how it has anything to do with anything since swe uses punctuations between digits and not commas.
And second, If I dont set bot speed at 1 bet/sec the betting is very "choppy". Sometimes its several seconds between bets and sometimes it comes at a really fast flow. I bet at rollin.io.
Other than that I really love the graph and settings
March 07, 2017, 12:05:11 PM
I use Dicebot Ver 3.3.1 (Play with Doge)
Playing on bitsler, I am constantly frozen..
I thought it might be related to internet connection.
I did the experiment in 3 different locations. But the same problem continues.
What do you suggest me to do in this regard?
What do you mean "frozen"?Playing on bitsler, I am constantly frozen..
I thought it might be related to internet connection.
I did the experiment in 3 different locations. But the same problem continues.
What do you suggest me to do in this regard?
Is the bot not responding or are bets just taking long?
Bot response but bets just taking too long..(same frozen)
"Frozen" means the bot doesn't respond.
Set your betting speed to 1 bet/s, if that doesn't work, make it bet a bit slower and slower untill it runs at a constant speed. Or increase your base bet.
March 07, 2017, 11:19:11 AM
I use Dicebot Ver 3.3.1 (Play with Doge)
Playing on bitsler, I am constantly frozen..
I thought it might be related to internet connection.
I did the experiment in 3 different locations. But the same problem continues.
What do you suggest me to do in this regard?
What do you mean "frozen"?Playing on bitsler, I am constantly frozen..
I thought it might be related to internet connection.
I did the experiment in 3 different locations. But the same problem continues.
What do you suggest me to do in this regard?
Is the bot not responding or are bets just taking long?
Bot response but bets just taking too long..(same frozen)
Jump to: