sorry if I ask again ... nobody knows if it is possible to increase the performance of the Giant N +?
THX
Topic: sgminer: Baikal Giant X10 / N / B - Open Source - Confirmed OC Giant B! - page 8. (Read 38379 times)
August 10, 2018, 05:34:28 AM
August 09, 2018, 12:30:16 PM
The return number are static but the display number is not sometimes.
August 09, 2018, 10:01:56 AM
who tried to increase the voltage? I do not have a power supply with voltage regulation. If anyone has any thoughts on this matter? 
Increases in voltage from 0.8v to 0.95v at Baikal B, the change was only in heating, it became much stronger!!! August 08, 2018, 12:21:54 PM
I tried this on X10 and if shows 50Mhz clock in UI but still hashes at 10G/5G as per alogo.
And I about this...Here they wrote that baikal uses static settings.
August 08, 2018, 11:15:01 AM
There are certain things that I have found interesting but I am not sure if you will feel same.
August 08, 2018, 11:10:44 AM
I can test on X10. What needs to be done?
Check for a change and report the results. sgminer Baikal B - 100000MHz, Baikal X10 - 50MHz.
B: https://yadi.sk/d/Kede5yRw3a2BnB
X10: https://yadi.sk/d/VGHJcSkk3a2DpS
I tried this on X10 and if shows 50Mhz clock in UI but still hashes at 10G/5G as per alogo.
August 08, 2018, 08:17:37 AM
What's the login/pwd for X10 for ssh?
baikal/baikal just hangs with putty.
baikal/baikal just hangs with putty.
baikal/baikal works on my x10 but root/baikal also worked on mine too.
August 08, 2018, 07:05:22 AM
What's the login/pwd for X10 for ssh?
baikal/baikal just hangs with putty.
baikal/baikal just hangs with putty.
So X10 seems locked down. The sgminer directories are owned by root, and nothing can be changed if we don't know the root password. Just baikal/baikal is useless.
August 08, 2018, 06:25:14 AM
What's the login/pwd for X10 for ssh?
baikal/baikal just hangs with putty.
baikal/baikal just hangs with putty.
August 08, 2018, 06:04:05 AM
is possible OC the Giant N+? I see the clock is change, but the performance is the same.....
THX
THX
August 08, 2018, 05:12:39 AM
Nothing works! I know which byte is responsible for the value of "400" in the file "sgminer". so, when editing this value on any other, the work of the miner does not change! This is all a dummy, but maybe on the model "X10" will work as I tried on the model "B". I can edit the wishing "sgminer" model file (X10) for verification. See below photo...
If you digg into sgminer miner code i have on github, you will understand that you cannot change only the byte that sets "400" mhz. By default baikal is using static settings.
August 08, 2018, 05:11:19 AM
Overclocking the baikal B works 42-> 46 g / s. Is it possible to accelerate by 15% or more? Cod3gen I made various changes (as written above), but they did not work.
Yepp, that should be possible on Giant B, i believe there are some members that have done this. I don`t have any B`s to confirm, or check what needs to be changed.
August 08, 2018, 05:08:31 AM
I can test on X10. What needs to be done?
Check for a change and report the results. sgminer Baikal B - 100000MHz, Baikal X10 - 50MHz.
B: https://yadi.sk/d/Kede5yRw3a2BnB
X10: https://yadi.sk/d/VGHJcSkk3a2DpS
August 07, 2018, 09:46:13 PM
I can test on X10. What needs to be done?
You can send your "sgminer" file and I will change it, for example, I will change the frequency from 300 to 400 and after you check for changes. August 07, 2018, 09:09:29 PM
You did not understand! I'm on the official sgminer file, the Baikal B model, I change the byte which is responsible for the frequency and without result. Although, after a bit of testing, I removed the conclusion that the parameter "Hashrate av" is slightly overstated, but the "Hashrate 5s" parameter remains the same. Most likely, I will need to play with the other digits in the "sgminer" file. and I do not do any updates that are described here! If there is someone who wants to test Baikal X10, then please ....
I can test on X10. What needs to be done?
August 07, 2018, 04:46:55 PM
which file you have changed these values?
sgminer August 07, 2018, 01:13:11 PM
You did not understand! I'm on the official sgminer file, the Baikal B model, I change the byte which is responsible for the frequency and without result. Although, after a bit of testing, I removed the conclusion that the parameter "Hashrate av" is slightly overstated, but the "Hashrate 5s" parameter remains the same. Most likely, I will need to play with the other digits in the "sgminer" file. and I do not do any updates that are described here! If there is someone who wants to test Baikal X10, then please ....
August 07, 2018, 08:57:52 AM
Nothing works! I know which byte is responsible for the value of "400" in the file "sgminer". so, when editing this value on any other, the work of the miner does not change! This is all a dummy, but maybe on the model "X10" will work as I tried on the model "B". I can edit the wishing "sgminer" model file (X10) for verification. See below photo...
https://d.radikal.ru/d24/1808/b4/7963bc3a97d4.png
https://d.radikal.ru/d33/1808/9e/a6fa3a0c5c77.png
August 06, 2018, 08:57:29 PM
The hash rate has increased globally in the autumn season of 2017.
August 05, 2018, 03:08:11 PM
Were there any hidden algorithms on Giant B like there was on the X10?
Jump to: