Pages:
Author

Topic: Sixth alt coin thread I forgot to mod last thread. - page 42. (Read 80193 times)

full member
Activity: 1148
Merit: 132
Sources are coming out that NiceHash was indeed hacked and wallets are being emptied out.  I hope it is not true, but if you had a significant balance in your NiceHash wallet, be prepared for bad news.

https://www.facebook.com/photo.php?fbid=10154808503106152&set=p.10154808503106152&type=3&theater

wow , I have all my asics currently ming on nicehash , 4 s9s i recived a few days ago and 3 D3's

probbaly had a balance of $100 there yesteday so i stand to lose $200 or so if i factor in todays earnings , the miners are still going  , not sure if i should move them to a different pool at this point

full member
Activity: 1148
Merit: 132
I want to add solar too my my farm , is it hard to install the panels yourself ?

If you're a DIY'er it's not that bad.  I did a 56 panel roof system by myself and had a helper to assist with digging the holes for my 3 ground based arrays.  On the ground mount arrays, having a helper assist with getting the upper rows of panels in place is a must, unless you have equipment to lift them up.  On my 1st ground mount array, I was able to install the upper rows by myself using a front end loader to raise the panels and function as a work platform at the same time.



If you have a farm, I'm assuming you have a tractor with a FEL and possibly an auger attachment for drilling the holes?  I found the electrical work pretty easy, but if you're doing Net Metering with the POCO, you need to submit an application to them and also get a permit from the county and they will need to inspect your work.
@crazydane sorry i as in farm i meant my GPU farm lol, either I have a larger big property here in the city, with a huge back yard I was thinking of putting in two mining sheds with roofs
and them put solo panels on top of them and also solo panels on top of my house  and garage ,  looking at the size of those panels i could probbaly do 180 panels on the existing rooftops
and another 120 probbaly on mining sheds

how much wattage would i get out of 300 panels in the summer do you think ?

Your setup looks very nice and clean , impressive
full member
Activity: 558
Merit: 194
Sources are coming out that NiceHash was indeed hacked and wallets are being emptied out.  I hope it is not true, but if you had a significant balance in your NiceHash wallet, be prepared for bad news.

https://www.facebook.com/photo.php?fbid=10154808503106152&set=p.10154808503106152&type=3&theater
full member
Activity: 558
Merit: 194
I want to add solar too my my farm , is it hard to install the panels yourself ?

If you're a DIY'er it's not that bad.  I did a 56 panel roof system by myself and had a helper to assist with digging the holes for my 3 ground based arrays.  On the ground mount arrays, having a helper assist with getting the upper rows of panels in place is a must, unless you have equipment to lift them up.  On my 1st ground mount array, I was able to install the upper rows by myself using a front end loader to raise the panels and function as a work platform at the same time.



If you have a farm, I'm assuming you have a tractor with a FEL and possibly an auger attachment for drilling the holes?  I found the electrical work pretty easy, but if you're doing Net Metering with the POCO, you need to submit an application to them and also get a permit from the county and they will need to inspect your work.
full member
Activity: 1148
Merit: 132
I'm a big solar proponent myself.  My rigs currently consume about 10,000 watts 24/7.  My current solar arrays help offset power consumption cost.  Here's a graph from Sunday when it was nice and sunny:



Of course this being close to the darkest part of the year here in the Northern hemisphere (I'm in Virginia), we don't have that many daylight hours compared to the summer months.  Too bad the sun doesn't shine 24/7!  Cheesy

I'm pretty close to bringing 2 additional solar arrays online.  Got all the panels installed Sunday along with all the micro-inverters.  Just need to pull wires for each of the 4 strings through the conduit in the ground back to the sub-panel and I'll be at 35 kW.





I want to add solar too my my farm , is it hard to install the panels yourself ?
full member
Activity: 558
Merit: 194
I'm a big solar proponent myself.  My rigs currently consume about 10,000 watts 24/7.  My current solar arrays help offset power consumption cost.  Here's a graph from Sunday when it was nice and sunny:



Of course this being close to the darkest part of the year here in the Northern hemisphere (I'm in Virginia), we don't have that many daylight hours compared to the summer months.  Too bad the sun doesn't shine 24/7!  Cheesy

I'm pretty close to bringing 2 additional solar arrays online.  Got all the panels installed Sunday along with all the micro-inverters.  Just need to pull wires for each of the 4 strings through the conduit in the ground back to the sub-panel and I'll be at 35 kW.



legendary
Activity: 3444
Merit: 1061
I just sold some btc at 12,100 .

Have to check on other coins  on bittrex.  May sell more.

Phil, curious are you selling coins off to take a profit or invest in more equipment?

That's sort of my dilemma now, I know buying and holding would yield more profit in the long run that mining. But I'm compelled to buy more mining equipment. It's sort of counter intuitive of course it's all speculative but still.  

More gear!

Buysolar and I will be building  the new bigger and better  solar array.

Stage 1 should be done this spring.



this move is wise, with more solar power..

if crypto remains profitable ROI will be quick, if crypto is down free solar energy maintains "tolerable" profit.

electricity source is always in the equation and if we are capable in improving it we should, crypto mining is not just improving mining gear.
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
I just sold some btc at 12,100 .

Have to check on other coins  on bittrex.  May sell more.

Phil, curious are you selling coins off to take a profit or invest in more equipment?

That's sort of my dilemma now, I know buying and holding would yield more profit in the long run that mining. But I'm compelled to buy more mining equipment. It's sort of counter intuitive of course it's all speculative but still.  

More gear!

Buysolar and I will be building  the new bigger and better  solar array.

Stage 1 should be done this spring.

full member
Activity: 558
Merit: 194
I had been mining for 2 months using MPH and just yesterday morning pointed all my rigs to NiceHash mining equihash.  All was well until 3:37 this morning when my phone started going crazy with messages from all my rigs that the miners were restarting.  Looking at the logs, none of them are able to connect to the NiceHash servers.  I try to log into the NiceHash dashboard, and get a message that the system is in "maintenance mode".

Time to switch back to MPH.

SERVER STATUS is all "green", yet I can't connect.

Europe - Amsterdam
USA - San Jose
China - Hong Kong
Japan - Tokyo
India - Chennai
Brazil - Sao Paulo

EDIT: Got all rigs switched back over to MPH and they are happily mining away ZEC again.

And now the main NiceHash page is showing:

legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Little update on the D1800 BTC progress, i got it finally to recognize and allocate resources to all 6 x 1080ti's finally, but i think i hit a roadblock on my PSU, i have a 450watt EVGA PSU i picked up cheap around black friday for $9.95 shipped after rebate and apparently it doesnt have enough juice to run more than 4 GPU's, as soon as i start mining with all 6 the PSU shuts off, i tried 5 same thing happened, i even tried running 6 @ 50% tdp as soon as i start mining the computer shuts off instantly as soon as it loads up, but as soon as i disable 2, i can mine with 4 even at 110% tdp without any power issues.... since the real load at that point is on the server PSU

The PSU im using, i am using 2 connectors from each string on the mobo, im guessing im overloading the peripheral power bar possibly...


How in the world did u find enough connectors on a 450W PSU to connect 6 cards???


1080ti average=220w depending on config.  so lets say:

220x6=1320w

You wonder why it's not working......


remember;  450w isn't 450w of 12V, its "n"amps of 12V;  lets be generous and say 32A.   32x12=384W.  Not enough for two cards.  And all of this is without subtracting the % overhead of efficiency (so multiply capability of PSU by 0.8 to 0.9 depending on rating: by my example 384x0.8=307.2w)

Check the PSU label.  See what it can really do.
sr. member
Activity: 338
Merit: 250
I just sold some btc at 12,100 .

Have to check on other coins  on bittrex.  May sell more.

Phil, curious are you selling coins off to take a profit or invest in more equipment?

That's sort of my dilemma now, I know buying and holding would yield more profit in the long run that mining. But I'm compelled to buy more mining equipment. It's sort of counter intuitive of course it's all speculative but still. 

I sold a little to invest more in my Omnia link below for lifetime mining contracts. Second stream can't hurt!
full member
Activity: 350
Merit: 100
I just sold some btc at 12,100 .

Have to check on other coins  on bittrex.  May sell more.

Phil, curious are you selling coins off to take a profit or invest in more equipment?

That's sort of my dilemma now, I know buying and holding would yield more profit in the long run that mining. But I'm compelled to buy more mining equipment. It's sort of counter intuitive of course it's all speculative but still. 
hero member
Activity: 751
Merit: 517
Fail to plan, and you plan to fail.
Little update on the D1800 BTC progress, i got it finally to recognize and allocate resources to all 6 x 1080ti's finally, but i think i hit a roadblock on my PSU, i have a 450watt EVGA PSU i picked up cheap around black friday for $9.95 shipped after rebate and apparently it doesnt have enough juice to run more than 4 GPU's, as soon as i start mining with all 6 the PSU shuts off, i tried 5 same thing happened, i even tried running 6 @ 50% tdp as soon as i start mining the computer shuts off instantly as soon as it loads up, but as soon as i disable 2, i can mine with 4 even at 110% tdp without any power issues.... since the real load at that point is on the server PSU

The PSU im using, i am using 2 connectors from each string on the mobo, im guessing im overloading the peripheral power bar possibly...


How in the world did u find enough connectors on a 450W PSU to connect 6 cards???
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
Anybody notice what XMR did the last couple of hours?  Crazy it went over $300 a couple places!  I jumped in an transferred a few over to bittrex where it was the highest of the 3 exchanges i am on and converted a few to Tether.  Interesting that there was about 10-12% spread between bittrex and Polo, so sending to bit was a no-brainer, especially since i was just converting to USDT.  I also dumped a little bit of DASH and DCR, just to hedge a bit in case there's a pull back on the horizon.

Not sure if any of you are mining ETN but it got de-listed from whattomine recently.  Still though, at .10 now it's still easily #1 profit if you can find a good pool.  There are a lot of dicey ones that either dont' report stats well or go offline way too much.  I switched over to hashparty.io about 4-5 hours ago and it seems pretty solid so far. Still have half my rigs on ETH+DCR though due to all the problems with ETN... don't really wanna commit all my miners there should it all blow up overnight lol.  Still, hoping to get my Vega rig up and running by next week as that thing is gonna kill on ETN or XMR. Still need to find 2 more Vega 56's so hoping to see some hit the market soon.

I just sold some btc at 12,100 .

Have to check on other coins  on bittrex.  May sell more.
sr. member
Activity: 600
Merit: 261
Anybody notice what XMR did the last couple of hours?  Crazy it went over $300 a couple places!  I jumped in an transferred a few over to bittrex where it was the highest of the 3 exchanges i am on and converted a few to Tether.  Interesting that there was about 10-12% spread between bittrex and Polo, so sending to bit was a no-brainer, especially since i was just converting to USDT.  I also dumped a little bit of DASH and DCR, just to hedge a bit in case there's a pull back on the horizon.

Not sure if any of you are mining ETN but it got de-listed from whattomine recently.  Still though, at .10 now it's still easily #1 profit if you can find a good pool.  There are a lot of dicey ones that either dont' report stats well or go offline way too much.  I switched over to hashparty.io about 4-5 hours ago and it seems pretty solid so far. Still have half my rigs on ETH+DCR though due to all the problems with ETN... don't really wanna commit all my miners there should it all blow up overnight lol.  Still, hoping to get my Vega rig up and running by next week as that thing is gonna kill on ETN or XMR. Still need to find 2 more Vega 56's so hoping to see some hit the market soon.
full member
Activity: 350
Merit: 100
Little update on the D1800 BTC progress, i got it finally to recognize and allocate resources to all 6 x 1080ti's finally, but i think i hit a roadblock on my PSU, i have a 450watt EVGA PSU i picked up cheap around black friday for $9.95 shipped after rebate and apparently it doesnt have enough juice to run more than 4 GPU's, as soon as i start mining with all 6 the PSU shuts off, i tried 5 same thing happened, i even tried running 6 @ 50% tdp as soon as i start mining the computer shuts off instantly as soon as it loads up, but as soon as i disable 2, i can mine with 4 even at 110% tdp without any power issues.... since the real load at that point is on the server PSU

The PSU im using, i am using 2 connectors from each string on the mobo, im guessing im overloading the peripheral power bar possibly...


even at 50% TDP that's almost 800w just for the GPUs my friend.
full member
Activity: 322
Merit: 233
Little update on the D1800 BTC progress, i got it finally to recognize and allocate resources to all 6 x 1080ti's finally, but i think i hit a roadblock on my PSU, i have a 450watt EVGA PSU i picked up cheap around black friday for $9.95 shipped after rebate and apparently it doesnt have enough juice to run more than 4 GPU's, as soon as i start mining with all 6 the PSU shuts off, i tried 5 same thing happened, i even tried running 6 @ 50% tdp as soon as i start mining the computer shuts off instantly as soon as it loads up, but as soon as i disable 2, i can mine with 4 even at 110% tdp without any power issues.... since the real load at that point is on the server PSU

The PSU im using, i am using 2 connectors from each string on the mobo, im guessing im overloading the peripheral power bar possibly...
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
yeah  I am liking the water block  1080 ti's  as they all go to 700+ sols

I am not sure I want  in my case

27
19
6


52 separate workers in three accounts.

as that is what  I will be at once I setup for the winter.
full member
Activity: 558
Merit: 194
I'm having the same issue with nvOC, so we can rule out smos being the culprit.

https://www.nicehash.com/miner/3HQMKEJT88ZdGLtJAZyRYA6EacknELcbbj

I threw this little table together using dstm stats and some custom commands within nvOC.  Handy reference for the various flavors of current gen nvidia GPUs since I run a mix of just about all of them.  The big looser is the 1050Ti's for sure.



Check out the max power limit on that Zotac 1080Ti ArcticStorm in miner05.  432 watts   Shocked  No wonder I have to run it as 230W just to get it to "wake up".
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
Pages:
Jump to: