So just how hard is it to get BitMain to fix warrenty repair?

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: fanatic26 on May 17, 2016, 04:34:11 PM

Quote from: Swimmer63 on May 17, 2016, 03:39:20 PM

EDIT - ordered a miner from bitmainwarranty.com last night. It was running on my pool in an hour.

So in a thread about warranty repair how exactly does buying a hosted unit have anything to do with the topic?

P.S. From what I see the bitmainwarranty site sells 14 day hosting contracts for $80 which is more than double the price of a decent hosting contract. I sure hope you arent spending $160 a month to host your unit because at that price you wont be making any profit.

It goes to the responsiveness of one location over another. Sorry if you're offended. For a higher price you can purchase an S7 from them that is hosted in the US or have them ship it to you. I am in the US so this is ideal. I could not tell you anything about a 14 day contract from them though. That sounds like rental, not hosting.

fanatic26

hero member

Activity: 756

Merit: 560

Quote from: Swimmer63 on May 17, 2016, 03:39:20 PM

EDIT - ordered a miner from bitmainwarranty.com last night. It was running on my pool in an hour.

So in a thread about warranty repair how exactly does buying a hosted unit have anything to do with the topic?

P.S. From what I see the bitmainwarranty site sells 14 day hosting contracts for $80 which is more than double the price of a decent hosting contract. I sure hope you arent spending $160 a month to host your unit because at that price you wont be making any profit.

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: kaltar on May 17, 2016, 03:24:19 PM

I`m in the same boats as alot of you. DOA board on one of my S7, they`ve received my board 3 weeks ago, and i still don`'t have shipping label for it. they tell me they found the board and did the repair on it, 2 weeks later i contact them and they tell me, no repairs are not done yet, it takes a few days. It`s BEEN 3 WEEKS for F... sake. and now i got another blade that died, it`s still under warranty but that one is going to Denver. even if if i got to pay for it.

i will NEVER NEVER buy from bitmain again. i bought 5 S7 and so far,
1 x DOA full S7. 150$ to send back and 1 month to get it back
1 x DOA board, 75$ and still in limbo
1 x board died, this one going to denver

not a very good tracking records and very poor RMA service. and all the ignores from them and run around.

i`m also going to post this in their thread in the hopes they will read it and other people will think twice about buying from them

Angry

Let me know how that works out.

EDIT - ordered a miner from bitmainwarranty.com last night. It was running on my pool in an hour.

kaltar

sr. member

Activity: 805

Merit: 250

I`m in the same boats as alot of you. DOA board on one of my S7, they`ve received my board 3 weeks ago, and i still don`'t have shipping label for it. they tell me they found the board and did the repair on it, 2 weeks later i contact them and they tell me, no repairs are not done yet, it takes a few days. It`s BEEN 3 WEEKS for F... sake. and now i got another blade that died, it`s still under warranty but that one is going to Denver. even if if i got to pay for it.

i will NEVER NEVER buy from bitmain again. i bought 5 S7 and so far,
1 x DOA full S7. 150$ to send back and 1 month to get it back
1 x DOA board, 75$ and still in limbo
1 x board died, this one going to denver

not a very good tracking records and very poor RMA service. and all the ignores from them and run around.

i`m also going to post this in their thread in the hopes they will read it and other people will think twice about buying from them

Angry

Swimmer63

legendary

Activity: 1593

Merit: 1004

I had one board on my 7th S7 go out. Tested it and it's just the board that's the problem. Went out a week after delivery.
Sent it to Hong Kong last week and submitted a repair request. I'm not holding out much hope of ever seeing it replaced though.

MyRig

donator

Activity: 792

Merit: 510

[email protected]

later this Feb, repair service is opened to public with fee regardless where you purchased your Antminer Product. If hardware was purchased from BitmainWarranty.com, then the warranty/repair be handled within USA.

Finksy

legendary

Activity: 1022

Merit: 1003

Quote from: MyRig on May 15, 2016, 01:34:33 AM

Depends on where you are, repair service with fee in USA may be faster. If you are in USA shipping to Colorado may be $14-$25.

Since when is that an option? I contacted Bitmain USA (who referred me to the main Bitmain service email) and requested to return my miner to Colorado (since I am in Canada). They told me that wasn't possible, and had me ship to China. I have been waiting since Feb. 10th, either the post office or Bitmain has apparently lost my package. :/

KandidNature

newbie

Activity: 2

Merit: 0

I was instructed by the support team to follow the RMA and ticket procedures. I was given all the information, I folloewd it, and if its 45 or 100 I should not be responsible for a defective product.

MyRig

donator

Activity: 792

Merit: 510

[email protected]

Depends on where you are, repair service with fee in USA may be faster. If you are in USA shipping to Colorado may be $14-$25.

KandidNature

newbie

Activity: 2

Merit: 0

Not only is thier technical support terrible, so far It has cost me 100 usd just to ship an s7 hashboard which was DOA now they are saying, "So sorry shipping to us is on youeven though it was a factory defect." To make them even look less reputable it has been a month with almost little to kno communication. One final note the "lost" my hash board but it magically found when I pulled the shipping records. So to summarize, I am out 100.00 plus all of the lost hash revenue. Go China!

MyRig

donator

Activity: 792

Merit: 510

[email protected]

Repair cost is depends on what is damaged. Some could be free under the warranty, some could be hot plugging the PSU to the hash PCB, some connecting ATX power plug into PCI-E plug and so on. If you do DIY and replace components and that did not help fix the problem, you may actually killed it.

It is sad but we do see PCB that failed asic chip transplants, capacitor replacements, melted PCI-E plug DIY replacement went wrong, components that were NOT part of the original parts list, half charred PCB to a few pretty clean PCB with possible defects.

If a few asic then you are looking at around $45 or so, if it is more than a few chips then you may be looking at $75, if you blow mist on your hash PCB to cool and got them shorted out, then you may have to replace the hash PCB. It is a case by case and it is unknown until it is being looked at it, however, the average turn around is just a few days from receiving the unit or parts for diagnostic.

scyth3

sr. member

Activity: 490

Merit: 251

Try this fix:

https://bitcointalksearch.org/topic/cheap-and-simple-repair-of-s7-hash-board-1420909

broken_pixel

hero member

Activity: 770

Merit: 500

Do not use Bitmain, they are slacking hard in warranty & communications. It takes days for them to reply to request & if you end up with a bad unit or board, boards you have to pay for shipping all the way back to Hong Kong & wait, wait, wait, wait & wait.

My S7-F1 already has a board that has failed after a little over a week. Now I am stuck with no option but to send the board to Colorado and end up paying 40- 200 bucks for repair or replacement cost. Or wait months to get Bitmain HK to honor the warranty. Time is bitcoin Bitmain HK & you suck on customer support & for not fully quality testing your products before shipping them to customers. So many people on Bitmains facebook page with bad reviews & issues, plus they wont even reply to any message you send them.

Rant over!

Question for Bitmainwarranty, why does it cost 200.00 USD to replace a single ASIC board for the S7-F1? That seems over priced since the entire units go for 533 from Bitmain & maybe 575 from BW.

Anyone have a spare S7-F1 Batch 16 ASIC board for sale? :*)

sloopy

hero member

Activity: 700

Merit: 501

https://bitcointalk.org/index.php?topic=905210.msg

Personally, I recommend purchasing your miners here in the US from Yoshi.
You will pay more but it is worth it imo. I am two days shipping to colorado using ups ground, and two days back.

Since I started dealing with these guys, it is a much better system.
You cannot buy from China and then deal with Colorado. They are different entities.

I haven't waited longer than a week except once when dealing with Colorado. If you know how to troubleshoot, or follow instructions they treat you respectfully. Totally the opposite of the factory.

Edit 1:
I do ask before I do anything.
I send screen shots.
I document every contact.
I take pictures.

When a new product is released or a product is near EOL for China, you can wait, and wait, and wait.

If you do buy from Yoshi / Colorado you can only go through them for service, but it is closer to what is acceptable service for the amount of money these miners cost.

PassThePopcorn

sr. member

Activity: 463

Merit: 309

Quote from: philipma1957 on April 24, 2016, 09:16:14 AM

Quote from: MyRig on April 23, 2016, 06:22:27 PM

Now there are options.

Warranty Claim can be filed from Create Ticket Page and send it to new Hong Kong address. (Please do not send it to Mainland China address that was used in the past)

Other option is to use repair center in USA, Venezuela and Ukraine, if you are outside of China, this is usually faster. Additional in Russia and EU be available but not in full service yet. (Localized repair service is a fee based. you can email to request the repair.

You have been missing from the forums since Jan 14th.

Nice to see you back.

Hope you are well.

I have written a lot of posts complaining about your company and the lack of service for the s-7.

I would like to think that you will stick around to support buyers here.

I would like a 67 to 75 usd refund for my under hashing batch 1 s-7.
So I can stop trashing your company about it.

Since your company gave it to li hosting in China of which I had 1 machine but simply did not compensate me for my one sent to my home.
And it is really annoying to be blown off for 67 to 75 dollars since Nov of 2015.

I wrote multiple emails zero reply.
I never asked for much.
I asked for a refund via a coupon and I still purchased 17 machines after the bad batch 1.

It would be nice to fix this for me.

BitmainWarranty is not Bitmain, it is a company in the USA that does contract work for Bitmain. The CEO of Bitmain posted something in this regard on his twitter some months ago. This is likely the reason why there are repair fees for the localized work (USA, Ukraine, and Venezuela).

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: MyRig on April 23, 2016, 06:22:27 PM

Now there are options.

Warranty Claim can be filed from Create Ticket Page and send it to new Hong Kong address. (Please do not send it to Mainland China address that was used in the past)

Other option is to use repair center in USA, Venezuela and Ukraine, if you are outside of China, this is usually faster. Additional in Russia and EU be available but not in full service yet. (Localized repair service is a fee based. you can email to request the repair.

You have been missing from the forums since Jan 14th.

Nice to see you back.

Hope you are well.

I have written a lot of posts complaining about your company and the lack of service for the s-7.

I would like to think that you will stick around to support buyers here.

I would like a 67 to 75 usd refund for my under hashing batch 1 s-7.
So I can stop trashing your company about it.

Since your company gave it to li hosting in China of which I had 1 machine but simply did not compensate me for my one sent to my home.
And it is really annoying to be blown off for 67 to 75 dollars since Nov of 2015.

I wrote multiple emails zero reply.
I never asked for much.
I asked for a refund via a coupon and I still purchased 17 machines after the bad batch 1.

It would be nice to fix this for me.

MyRig

donator

Activity: 792

Merit: 510

[email protected]

Now there are options.

Warranty Claim can be filed from Create Ticket Page and send it to new Hong Kong address. (Please do not send it to Mainland China address that was used in the past)

Other option is to use repair center in USA, Venezuela and Ukraine, if you are outside of China, this is usually faster. Additional in Russia and EU be available but not in full service yet. (Localized repair service is a fee based. you can email to request the repair.

toptek

legendary

Activity: 1274

Merit: 1000

if stuff was under warranty from them it was never hard to get any thing replaced or fixed by them, for me , it was when it wasn't under warranty the problems started they would give me a price a few days later i go to do it they would not honor it or any prices they gave me in fact would mark it so high i would tell them forget it. There excuse was prices go up . I'm used to prices being honored for 30 days at least not one day. or being told that was the price that day that day etc etc ..but that was also when they had a repair center in the US which was a bitch to keep open with US laws I guess if it's not open any more. it may still be there can't say the last thing i ever bought from them was 1 S5, i felt cheated with the S7 so i never bought one .

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: Finksy on April 18, 2016, 12:51:35 PM

I sent all 3 BURNT S7 hash blades out in February, and I still have not received a replacement miner. It caught fire around Christmas, their warranty/RMA service is a fucking joke.

Does not sound fun what timeline are we talking about early or late Febuary? Also what do they say if you ask questions showing you sent it so long ago?

Just curious on that, but best of luck hope it ends up being soon on getting back.

Finksy

legendary

Activity: 1022

Merit: 1003

I sent all 3 BURNT S7 hash blades out in February, and I still have not received a replacement miner. It caught fire around Christmas, their warranty/RMA service is a fucking joke.

Topic: So just how hard is it to get BitMain to fix warrenty repair? (Read 2745 times)