Topic: [Sold] 0 x Liquid Synergy Design K16's Available - USA Only - 0.1 BTC each (Read 2512 times)
January 16, 2014, 04:59:19 AM
I think most of the problems with overclocking have to do with an over-taxed power regulation circuitry overheating. Mounting heatsinks on the vregs (I think it's the vregs) would probably give you another 20-50MHz.
January 16, 2014, 04:03:43 AM
Using CGMiner here. Been using it for a year or two so I just stick with it. Had to recompile with the klondike option but nothing hard.
I do plan to overclock them
but I just wanted them to run 24hrs @ 300Mhz before cranking it up to 325 and then 350.
I do plan to overclock them
but I just wanted them to run 24hrs @ 300Mhz before cranking it up to 325 and then 350. if you are running them on a decent PSU (my two are running off a thermaltake 430W). they should barrier around ~360 MHz or so.
i tried clocking my two at 375 and they dropped like a stone to like 2.5Ghash. backed it off until it was taht sweet razers edge. 363 for me. YMMV
I had to add extra cooling fans to mine to over clock them past 323 . Made a aluminum rack for them and mounted 4 extra thermaltake fans. Now i have them all running in the low 40's over clocked at 360.
January 14, 2014, 09:40:06 PM
Using CGMiner here. Been using it for a year or two so I just stick with it. Had to recompile with the klondike option but nothing hard.
I do plan to overclock them but I just wanted them to run 24hrs @ 300Mhz before cranking it up to 325 and then 350.
I do plan to overclock them
but I just wanted them to run 24hrs @ 300Mhz before cranking it up to 325 and then 350. if you are running them on a decent PSU (my two are running off a thermaltake 430W). they should barrier around ~360 MHz or so.
i tried clocking my two at 375 and they dropped like a stone to like 2.5Ghash. backed it off until it was taht sweet razers edge. 363 for me. YMMV
January 14, 2014, 06:49:15 PM
Using CGMiner here. Been using it for a year or two so I just stick with it. Had to recompile with the klondike option but nothing hard.
I do plan to overclock them but I just wanted them to run 24hrs @ 300Mhz before cranking it up to 325 and then 350.
I do plan to overclock them
but I just wanted them to run 24hrs @ 300Mhz before cranking it up to 325 and then 350. January 14, 2014, 08:32:41 AM
just realized i never put up a pic of em playing nice
running at 350MHz
presently at 363MHz. working my way up until i hit a wall (current limit on the PMICs)
running at 350MHz
presently at 363MHz. working my way up until i hit a wall (current limit on the PMICs)
January 14, 2014, 08:27:17 AM
Got both of mine today, thanks!
Mining stats:
K0 @300Mhz = ~4.8 GH/s
K1 @300Mhz = ~4.6 GH/s
Mining stats:
K0 @300Mhz = ~4.8 GH/s
K1 @300Mhz = ~4.6 GH/s
OC them sonz to 5.8 @ 363Mhash/s
bfgminer or cgminer?
January 13, 2014, 11:25:54 PM
Got both of mine today, thanks!
Mining stats:
K0 @300Mhz = ~4.8 GH/s
K1 @300Mhz = ~4.6 GH/s
Mining stats:
K0 @300Mhz = ~4.8 GH/s
K1 @300Mhz = ~4.6 GH/s
January 13, 2014, 11:21:07 AM
are there any left :
??
theyve all been sold off ?? January 13, 2014, 06:46:59 AM
are there any left :??
?? January 10, 2014, 11:49:54 PM
topic=168174.msg4440712#msg4440712
Got me running
Got me running
January 10, 2014, 06:26:50 PM
look what i got
will update with pic of em running January 10, 2014, 02:10:09 PM
as a side thought are there any special drivers needed on linux (beaglebone black)
Not aware of any. If you can run CGMiner on it, you should not have any issues communicating with these. In theory.
I'm a Big Friggin Guns type of guy
January 10, 2014, 12:56:56 AM
as a side thought are there any special drivers needed on linux (beaglebone black)
Not aware of any. If you can run CGMiner on it, you should not have any issues communicating with these. In theory.
January 09, 2014, 11:37:38 PM
small ray of hope for tomorrow. UPS updated to say delivery by end of day tomorrow: 1/10/14. MF-ing polar vortex f***ing with mah company ~:[
small angry rant aside i hope to have them up and hashing quickly tomorrow.
as a side thought are there any special drivers needed on linux (beaglebone black)
small angry rant aside i hope to have them up and hashing quickly tomorrow.
as a side thought are there any special drivers needed on linux (beaglebone black)
January 09, 2014, 11:07:56 PM
Kickass ! Glad to see you folks got the stuff OK.
Cheers !
Cheers !
January 09, 2014, 06:37:22 PM
Thanks Xian01, K16's, BE's and Ants mining. Will OC K16's a bit more later. 
Great Packing
Great Packing
January 09, 2014, 04:43:17 PM
Received my 4 units today. Thanks for the fast shipping Xian01
Packaged very well, no complaints at all. Will be testing them out later but they all look in excellent condition visually.
I would definitely buy from Xian01 again, answered all my questions before and after the sale.
Packaged very well, no complaints at all. Will be testing them out later but they all look in excellent condition visually.
I would definitely buy from Xian01 again, answered all my questions before and after the sale.
January 05, 2014, 05:23:56 PM
im selling 2 of these units too, im located in EU, they are brand new, i just received them from steamboat
January 05, 2014, 12:11:51 PM
I'll take the last 3
January 05, 2014, 12:48:31 AM
Another 6 units sold this evening and will be shipped out Monday morning. Holding onto the last unit for the time being.
Cheers folks.
Cheers folks.
Jump to: