Topic: [SOLD] 32x Antminer S5's w/ acrylic cases - page 2. (Read 2569 times)

S7 batch 4 and 5 is now open so nope that should not pin the S5 at $522. An overpriced miner is still an overpriced miner regardless of where it is sold. The price per TH of an S7 is $364. If yours were a bit above 364 from bitmain to account for the "must have it now" premium then that would be nice.

Anyways, enough of my thread crapping :p Good luck with the sale!

5 Sold, 27 left.

Yeah, those were the days.   

In terms of the price vs the S7, if you look at the price that you can pay to get an S7 right now, that would pin an S5 at $522 (eBay or on here the S7's are typically around $2200+), even at Bitmain, delivered a month from now they'd make an S5 $427 -  but both of those prices are without shipping, mine is available now and includes shipping, plus you get my nifty acrylic case - that alone is bound to be something that you treasure and pass down to your kids for generations to come. 

I would prefer to sell multiple units at a time, and I'll discount accordingly - but if I have to sell them onesy twosy then this is the price.  Feel free to PM me any offers and on what quantity of units.  In terms of what a 'decent number of units' would be, I would say 8 or more, as that takes out two rows at a time from my Plenum - partial rows are a PIA plus I like powers of 2. 

Is ALL of them considered a "decent number of units" ? The only issue is cost. I don't think we can meet your asking price or what you have in mind. You are being very smart in the sense that you are trying to get the same $ per TH as the S7s and just turn around and roll that hashing power into S7s but the issue is that we as buyers are aware of this thing as well. There is no incentive or advantage to buy these instead of S7s short of the time saved while the S7s ship, but the btc these mine in the meantime will likely not make up for the increased price.

I kind of miss the days of cheap btc when I could've grabbed an S5 for $280 to $300

hehe, my hard work has paid off - thanks!  I'm looking forward to seeing how the plenum works when I load it down with S7's.  I don't know if I'll be able to achieve the same density as the S5's, so I'll probably shoot for 24 as a starting point again.


I wouldn't rule out Canada, but we'd have to figure out shipping then - customs just always is a pain.  I would only want to do Canada if it's a decent number of units - one or two is probably just too much hassle.  Feel free to PM if that works for you.


Sharp eyes, I've been working with Finksy on coming up with a solution for quieting down the 2880w - we're pretty close, so once I have something concrete to report I'll start a thread on it.  


I run them all stock 350, so they're all right around 1.15 TH/s, give or take as expected... The vast majority of them run quite a bit cooler in normal operations than stock S5's because of the mods.  They all run the full case (obviously), but most of them also have heatsinks on all the hash chips.  In practice it was way more work than it was worth, but for anyone buying them, they don't have to suffer through doing it themselves.  They're attached with high quality thermal adhesive, so you don't need to worry about them falling off like the S7 ones.  

All running they average around 40TH/s - temps are normally in the mid 60's, but that's where I try to keep them, if they get close to 75c then they automatically start downclocking to get back into the 60's.  The fans all run at 50% so there's very little load on the BB cape, since the plenum does the bulk of the work for air movement and heat isolation.

what is the hashrate on these

Off topic, but curious about your fan mod on IBM PSU. Do you have a thread on this? Does the fan able to keep temp low? I am sure it lowers the noise tremendously.

Thanks.

Kind of a shame you're not shipping internationally though. I'd consider making an offer but I'm based in Canada.

Free bump! This is pure perfection. 
You work like pro.

I'm in the process of switching over my S5's to S7's, so the plenum miners are next on the list!  If you enjoyed my acrylic case mod thread:

https://bitcointalksearch.org/topic/antminer-s5-laser-cutter-mods-1086882

Now's your chance to buy one - at least when you buy one of my S5's.    Here's my current configurations, you can see all 32 miners working away quite happily:




Each miner has the stock fan (I'll be happy to swap the stock fan with a Kaze Ultra, if you'd prefer that), one of my acrylic fan spacers, the full acrylic enclosure (both sides with BTC logo, bottom and top).

I'm selling them for $425/each including free shipping inside the US only (no international).  BTC only, escrow at buyers expense with any of the high-ranking escrow agents on the forum (OgNasty preferred).

I also have the acrylic side panels from the first revision of the plenum - if anyone is interested, shoot me an offer.  Keep in mind that these are not light, so shipping will be expensive:



you can see them in use here:

https://bitcointalksearch.org/topic/the-ultimate-s5-mega-enclosure-maybe-1184272

there are 24 of them, they'll be sold as a lot - no point in breaking them up really, although if you were so inclined you could easily make smaller versions of the big rack.  As you can see from the pictures above, my latest version just increases the density of the miners, and moves the PSU's off to the side, so I can have 32 instead of 24.