Topic: [SOLD] BFL & GPU gear - page 3. (Read 3525 times)
Yeah I may be interested in a single.. would be shipping to the Uk so could u give me a price for that please
how many singles are left??
Got the cards. Quick and easy transaction. Thanks!
Did your MSI 890FXA GD70 boards run successfully with all six slots populated?
Yes, MSI 890FXA-GD70 can take 6 cards. If you use 1x > 1x or 1x > 16x (They are electrically 1x > 1x) risers though, you will need to short the PCI-E presence pin to a ground for the card to be detected. The bottom right rig is an 890FXA-GD70 with 1x > 1x risers and 6 cards (8 gpu's). You can see the wires in each slot shorting the presence pin protruding out.
Nice pic, thanks. Yeah, I have a half dozen 890FXA-GD70 rigs, but I found some have had slots go bad after about a year or so. That's really what I was asking.
I had a bunch of boards get fried by the blizzard last weekend - snow came in my exhaust window fans and melted on the mobo's. They're all oxidized (green and orange rust in places). I'm picking up the two GD70's to replace a couple of my dead boards. I'll post again once I have them running.
Did your MSI 890FXA GD70 boards run successfully with all six slots populated?
Yes, MSI 890FXA-GD70 can take 6 cards. If you use 1x > 1x or 1x > 16x (They are electrically 1x > 1x) risers though, you will need to short the PCI-E presence pin to a ground for the card to be detected. The bottom right rig is an 890FXA-GD70 with 1x > 1x risers and 6 cards (8 gpu's). You can see the wires in each slot shorting the presence pin protruding out.
Wrong thread.
Payment received for 2 GD70's.
Anyone waiting for a response for the BFL's I apologize for the delay, I found 2 that have some issues and I'm trying to get the time to reload firmware and test before I sell them.
Anyone waiting for a response for the BFL's I apologize for the delay, I found 2 that have some issues and I'm trying to get the time to reload firmware and test before I sell them.
Did your MSI 890FXA GD70 boards run successfully with all six slots populated?
Yes but they are tricky, it took a bit of riser and card swapping, I have only been running 1 GPU on them recently.
I don't mind swapping around cards to get them working, but don't want to deal with any dead slots.
If there are no dead slots, I'll take the remaining two board/cpu/ram combos.
Are you selling your risers? I don't see them listed.
I haven't had any dead slots on the 890's, they are good boards. I'll look but I don't think I have any risers in this batch. I'll have another batch of GPU equip to list soon with a lot of risers.
Did your MSI 890FXA GD70 boards run successfully with all six slots populated?
Yes but they are tricky, it took a bit of riser and card swapping, I have only been running 1 GPU on them recently.
I don't mind swapping around cards to get them working, but don't want to deal with any dead slots.
If there are no dead slots, I'll take the remaining two board/cpu/ram combos.
Are you selling your risers? I don't see them listed.
Did your MSI 890FXA GD70 boards run successfully with all six slots populated?
Yes but they are tricky, it took a bit of riser and card swapping, I have only been running 1 GPU on them recently.
Did your MSI 890FXA GD70 boards run successfully with all six slots populated?
Payment sent for 1 x MSI 890FXA GD70 w/ Sempron CPU, 2 GB RAM
Awaiting confirmation.
Awaiting confirmation.
Received. I'll send tracking when shipped. Thanks.
Payment sent for 1 x MSI 890FXA GD70 w/ Sempron CPU, 2 GB RAM
Awaiting confirmation.
Awaiting confirmation.
Received payment for 1 7970. Shipping in am.
Received payment for 6970 & 5970's.
Received payment for 6970 & 5970's.
These have been shipped.
PM sent.....
Received payment for 1 7970. Shipping in am.
Received payment for 6970 & 5970's.
Received payment for 6970 & 5970's.
PM Sent
Those 7970's are gonna sell
Pm sent my man.
Are you accepting btc payments & shipping to the UK? Cheers.
BTC is preferred, I would have to ask you to cover shipping outside the US.
PM sent
replied.
Jump to: