where are you located?
Topic: [SOLD] Bitfury Rig 350GH/s (with 10 H-Boards) - page 2. (Read 2299 times)
Powerline adapters
this. got internet in the basement this way. speed sucks (some mbit) but is enough for stratum
Thank you everyone for the offers!
Deal is currently on hold, recieved many PM offers, 9.5BC was the bid, I am considering the one who offered first. If the deal gets cancelled, I will reconsider.
I hope thats fine for everyone?
Yes I am willing to to escrow.
And yes, you need an ethernet cable, but as stinky_pete said, it would also work with powerline adapters.
Have a nice night!
Deal is currently on hold, recieved many PM offers, 9.5BC was the bid, I am considering the one who offered first. If the deal gets cancelled, I will reconsider.
I hope thats fine for everyone?
Yes I am willing to to escrow.
And yes, you need an ethernet cable, but as stinky_pete said, it would also work with powerline adapters.
Have a nice night!
Powerline adapters
It's not like you can't buy a long assed ethernet cable for cheaps.
It would need to go through at least 5 or 6 rooms, and up 3 floors. That or would require drilling through some floors, as my router is in my basement.
My 7 BTC offer still stands, but I'll have to figure out some way to swing it.
I'll offer you 7 BTC including shipping. My question though is, the miner needs to be continually plugged into a router via an ethernet cable? Or just when setting it up? I only have one router in my house, and its not in the best location to be running a mining rig from.
Also, is escrow though a mutually agreed trustworthy party an option?
Also, is escrow though a mutually agreed trustworthy party an option?
It's not like you can't buy a long assed ethernet cable for cheaps.
I'll offer you 7 BTC including shipping. My question though is, the miner needs to be continually plugged into a router via an ethernet cable? Or just when setting it up? I only have one router in my house, and its not in the best location to be running a mining rig from.
Also, is escrow though a mutually agreed trustworthy party an option?
Also, is escrow though a mutually agreed trustworthy party an option?
Has to be plugged in continually via an ethernet cable. If you're really geeky you could setup a raspberry pi compatible wi-fi card and use that instead of the ethernet interface.
I'll offer you 7 BTC including shipping. My question though is, the miner needs to be continually plugged into a router via an ethernet cable? Or just when setting it up? I only have one router in my house, and its not in the best location to be running a mining rig from.
Also, is escrow though a mutually agreed trustworthy party an option?
Also, is escrow though a mutually agreed trustworthy party an option?
6.7
This kit is due to make 6.0 btc per month at the next difficulty adjustment which is only 706 blocks away. I'd offer 6.6 as a result.
Offer: 6.5 (with shipping)
PM'd
I'm selling my Bitfury miner. It has been running steady at 350GH/s since the end of September. I added blue heatsinks to the back of the chips and the power regulator to overclock the rig and make it more stable.
Power consumption at the wall: only 348 Watt. That's under 1W/GHps!
Included:
What you need:
What you need to do:
I am looking to sell it for 9,5 BTC. Offers are welcome.
For what it's worth, here's my ebay stats:
http://www.ebay.com/usr/achim-smile
and I've been on the forums since 2011.
I can assist you with set-up instructions if you don't know how to get it running.
A guide for tuning and support can be found here: https://bitcointalksearch.org/topic/guide-bitfury-miner-supporttuning-287590
This item will be shipped EXPRESS from Switzerland within 24hours of recieving payment. Shipping itself will take 2-3 business days for most countries.
Please only serious offers, I will be straightforward as well.
Power consumption at the wall: only 348 Watt. That's under 1W/GHps!
Included:
- 10 Bitfury H-Boards V1 (9 completely heatsinked, 1 partially heatsinked, this doesn't affect the speed. Overclocked with "pencil-mod")
- 1 M-Board
- 1 Raspberry Pi
- 1 SD card with the miner software
- 3x 120mm Fans (rig is relatively quiet)
What you need:
- Ethernet cable
sufficient psu with 2x 6pin PCI-E power connectors
What you need to do:
- Plug in H-Boards, Raspi and SD card (I will number the cards)
- Connect ethernet cable and psu
- Power up
- Connect to the rig in your web browser
- Enter your Mining Pool credentials
- profit
I am looking to sell it for 9,5 BTC. Offers are welcome.
For what it's worth, here's my ebay stats:
http://www.ebay.com/usr/achim-smile
and I've been on the forums since 2011.
I can assist you with set-up instructions if you don't know how to get it running.
A guide for tuning and support can be found here: https://bitcointalksearch.org/topic/guide-bitfury-miner-supporttuning-287590
This item will be shipped EXPRESS from Switzerland within 24hours of recieving payment. Shipping itself will take 2-3 business days for most countries.
Please only serious offers, I will be straightforward as well.
Jump to: