Topic: [SOLD] Dual Habanero 1.3THs in Sydney, Australia (Start $0.99) (Read 2087 times)

Winning bid:
AU $430.00 +$50 shipping

bargain price for 2 boards with cooling system.

QG

some readers might be interested in this: https://bitcointalksearch.org/topic/4-650ghs-habanero-boards-350each-763154 (6 650GH/s+ Habanero boards, $450/each)

i tried to revise the listing for int. shipping but was too late.

if you are still able to bid on it I will honour $100AUD for shipping to USA.

Cheers,
QG

AU small market comparing to the world good luck
I know shipping is a real pain from Down under but think relisting the item with Worldwide shipping
as we most of the sellers do

Time left:
3d 06h (02 Sep, 2014 20:43:39 AEST)
That's Tuesday..

Current bid:
AU $10.61
[ 3 bids ]

http://www.ebay.com.au/itm/Dual-Habanero-1-3THs-Bitcoin-Miner-/251630025832

Cheers,
QG

You can now pick it up at a bargain price at eBay...  http://www.ebay.com.au/itm/251630025832

Starting bid: AU $0.99

Sorry, no international shipping.

Cheers,
QG

Offers around 1.6btc for the complete hashing unit will be considered.

New config (862MHz) and power usage (1605W):



Cheers,
QG

bump..

this sale is newbie friendly coins will be escrowed, happy to help get the unit running (although I mainly only use Linux so no Win support). There's a lot of material out there to help you run these boards. There's even a thread: https://bitcointalksearch.org/topic/the-habanero-650ghs-oos-519943

The unit is ready to mine, you just need to plug power to it and run cgminer (with HashFast options enabled when compiling).

Cheers,
QG

Update: Both Habanero boards are now clocked at a default rate of 887MHz with Voltage set at 935mV.


Approx. power usage is 870w + 860w = 1730w total.




Cheers,
QG

Thanks for that great insight lol.

I lack doing homework.

It doesn't look newbie friendly and at 1 watt per GH, you're going to be paying out of the ass for electricity.

whoah thats a crazy setup..

is this newbie friendly?

Hashing unit requires the following power connectors:

8 x 6pin PCIe (4 on each board)
1 x 4pin MOLEX (power water pump)
3 x 3pin FAN (power 3 x 1amp fans)

Items you will require to start mining with hashing unit:

2 x mini-B USB cable
1 x USB control box (PC, Laptop, RPi) running latest cgminer s/w
A large fan, enough to blow air over the two boards. At the default settings, you require airflow to cool the boards or they will overheat and stop hashing. Alternatively you can down clock to reduce the heat and hash rate. 
Manufacturer recommends a high quality 1000W+ single rail ATX power supply for each Habanero board.

Cheers,
QG

reserved for FAQ

Want to sell dual Habanero boards hashing at a total of 1.3THs located in Sydney, Australia. The hashing unit comes complete with a triple radiator water cooling system and is ready to mine. Local pick-up or drop-off is preferred. I would prefer not to have to take the unit apart to pack up, but will consider any offers around 1.6btc 2.3btc for the complete hashing unit. Shipping is additional. Escrow welcomed.

These boards can be purchased direct from manufacturer for $600USD each: https://peppermining.com/shop/the-habanero/

cgminer stats at the time of posting:

The hashing unit comes with the following accessories:
The 2 x Noctua fans pictured are not included.

Both boards have suffered some damage to the PCIe power connectors. Power connectors may look burnt and have cracked but pins are in tact and connectors are still completely functional. PCIe connectors still clip in and boards power up as they should. One of the boards, FATALII only has the 1 USB connector instead of 2. See pictures for details.

Both board have the latest firmware (habanero-firmware-20140713-0.tar.gz) applied and have the following default settings. i.e. when you run the boards with hfa-hash-clock 1 setting in cgminer, it will hash at the following settings:
FRUTESCE - Frequency: 862 MHz 937 MHz 887MHz   Voltage: 925mV 960 mV 935mV
FATALII - Frequency: 862 MHz 900 MHz 887MHz   Voltage: 925mV 935 mV 935mV
If you like this changed, please let me know.

Boards can be down clocked for better efficiency. Currently the boards draw less than 1,890W (@ 240V) at the wall. This max. value was taken when both boards were running at 937MHz. Currently the pair draws 1,605W at the wall.

EDIT:

Pictures can be found here: http://imgur.com/a/SMBJP

Front


Back


Stats


FATALII only has 1 USB connector


FATALII bottom right PCIe connector:


FATALII bottom left PCIe connector:


FRUTESCE top right PCIe connector:


Cheers,
QG