Topic: [SOLD OUT] 1.45 BTC Antminer S1 180GH/S Shipps on Feb 13 (Price Protection) - page 27. (Read 63774 times)
February 13, 2014, 09:39:41 PM
They've been unresponsive these couple of days, probably busy with the shipment. But they could have at least give us an update on the status of the hosting. I was previously told that it will start 13 Feb (don't know which timezone), but till now, no update from them.
February 13, 2014, 08:45:22 PM
Xer0 well the email said when shipped would receive an email stating the change never received it I know Sushi is trustworthy just never bought from a forum using bitcoin before so im a little bit apprehensive is all but I know he's got a good track record at this type of stuff. So will I not get a status update or tracking number anyone else down for 13th despatch received a status change on sushis website or an email/ tracking confirming the same? I bought from the group buy as I thought there would be some interaction from the OP but to date I've not had anything......
February 13, 2014, 08:14:17 PM
stay assured these are already shipped out
sometimes you just get the parcel faster than the tracking
sometimes you just get the parcel faster than the tracking
February 13, 2014, 07:18:26 PM
Still no updates on shipping its now 14th Feb now! no changed status, or remarks from the admins or sushi.....getting a little nervous here sushi....!
February 13, 2014, 07:05:17 PM
Anyone got their hosted miner up yet?
Not yet, eagerly waiting. (Ordered in 2/4)
Also waiting here!
February 13, 2014, 06:37:45 PM
Do we just plug a PCIe cable into the connecter on each board and ignore the red and black power connecter?
Yes.
February 13, 2014, 05:34:03 PM
Anyone got their hosted miner up yet?
Not yet, eagerly waiting. (Ordered in 2/4)
February 13, 2014, 05:28:21 PM
Do we just plug a PCIe cable into the connecter on each board and ignore the red and black power connecter?
February 13, 2014, 03:55:44 PM
hello,
i placed 3 orders(on the 6.7.9.)and received 3 ups track no,that dont match.
the first one arrrive yesterday with a different no then i received.
the 2nd one is captchured by the f...police ,they dont know what kind of thing that is^^....i have to speak with them tomorrow....
the 3rd one..i dont know.
sushi mayby u can check my no from ups and send me the matched ones?
my orders no:515,547,603
thanks falseflag
i placed 3 orders(on the 6.7.9.)and received 3 ups track no,that dont match.
the first one arrrive yesterday with a different no then i received.
the 2nd one is captchured by the f...police ,they dont know what kind of thing that is^^....i have to speak with them tomorrow....
the 3rd one..i dont know.
sushi mayby u can check my no from ups and send me the matched ones?
my orders no:515,547,603
thanks falseflag
February 13, 2014, 03:45:46 PM
Anyone got their hosted miner up yet?
February 13, 2014, 02:27:00 PM
Order 489 for two arrived today to ne usa without notice. The very day I anticipated... Oh how sweet!
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Change the IP under Network for the eth1 click Edit and change the 192.168.1.99 to anything that is not currently being used such as 192.168.1.200 then save and apply.
okay I got one setup and changed it to 192.168.1.
It seemed to work I was able to program it and set up a mining pool.. So I used
stratum.btcguild.com:3333 as pool 1
How long before it shows some hash? or do I have the wrong address for btcguild? does it need to be an http address and not stratum?
For my BTC mining, I use btcguild too. You have to specify the whole URL, i.e. "stratum+tcp://stratum.btcguild.com:3333"
All 4 of my antminer S1's have no problem with that with any of the 3 most recent firmwares
pulling 718 watts to do it. I can't complain with this gear it appeared to be new and while the guides are a bit short on details between a few nice forum members and a guid on you tub I got this running.
I now hash 450 gh between :
two s-1's
four u-1's
33 ice nano furies
and 1 lone red fury.
most hash is tossed at btc guild some at bit minter
I am now going to complete my lite coin farm . I have 6 gpus I am boosting to 7 today/
These S1 units are the best thing built.. set it and let it go. Mine is running out in my garage 24/7 for the last 21 days. Not a hiccup, burp, nothing!
Pretty Solid!
February 13, 2014, 02:18:11 PM
Order 489 for two arrived today to ne usa without notice. The very day I anticipated... Oh how sweet!
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Change the IP under Network for the eth1 click Edit and change the 192.168.1.99 to anything that is not currently being used such as 192.168.1.200 then save and apply.
okay I got one setup and changed it to 192.168.1.
It seemed to work I was able to program it and set up a mining pool.. So I used
stratum.btcguild.com:3333 as pool 1
How long before it shows some hash? or do I have the wrong address for btcguild? does it need to be an http address and not stratum?
I had a similar thing - I had to set the default gateway to the ip address of my router to get it working...
February 13, 2014, 01:54:04 PM
Order 489 for two arrived today to ne usa without notice. The very day I anticipated... Oh how sweet!
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Change the IP under Network for the eth1 click Edit and change the 192.168.1.99 to anything that is not currently being used such as 192.168.1.200 then save and apply.
okay I got one setup and changed it to 192.168.1.
It seemed to work I was able to program it and set up a mining pool.. So I used
stratum.btcguild.com:3333 as pool 1
How long before it shows some hash? or do I have the wrong address for btcguild? does it need to be an http address and not stratum?
For my BTC mining, I use btcguild too. You have to specify the whole URL, i.e. "stratum+tcp://stratum.btcguild.com:3333"
All 4 of my antminer S1's have no problem with that with any of the 3 most recent firmwares
pulling 718 watts to do it. I can't complain with this gear it appeared to be new and while the guides are a bit short on details between a few nice forum members and a guid on you tub I got this running.
I now hash 450 gh between :
two s-1's
four u-1's
33 ice nano furies
and 1 lone red fury.
most hash is tossed at btc guild some at bit minter
I am now going to complete my lite coin farm . I have 6 gpus I am boosting to 7 today/
These S1 units are the best thing built.. set it and let it go. Mine is running out in my garage 24/7 for the last 21 days. Not a hiccup, burp, nothing!
February 13, 2014, 12:52:36 PM
Order 489 for two arrived today to ne usa without notice. The very day I anticipated... Oh how sweet!
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Change the IP under Network for the eth1 click Edit and change the 192.168.1.99 to anything that is not currently being used such as 192.168.1.200 then save and apply.
okay I got one setup and changed it to 192.168.1.
It seemed to work I was able to program it and set up a mining pool.. So I used
stratum.btcguild.com:3333 as pool 1
How long before it shows some hash? or do I have the wrong address for btcguild? does it need to be an http address and not stratum?
For my BTC mining, I use btcguild too. You have to specify the whole URL, i.e. "stratum+tcp://stratum.btcguild.com:3333"
All 4 of my antminer S1's have no problem with that with any of the 3 most recent firmwares
pulling 718 watts to do it. I can't complain with this gear it appeared to be new and while the guides are a bit short on details between a few nice forum members and a guid on you tub I got this running.
I now hash 450 gh between :
two s-1's
four u-1's
33 ice nano furies
and 1 lone red fury.
most hash is tossed at btc guild some at bit minter
I am now going to complete my lite coin farm . I have 6 gpus I am boosting to 7 today/
February 13, 2014, 12:41:44 PM
Order 489 for two arrived today to ne usa without notice. The very day I anticipated... Oh how sweet!
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Got one up and running behind a router but both ants have the same ip and I'm stumped at the moment as to what to do with the second one. Changing the ip seems obvious enough but I think I'm missing something even more obvious
Change the IP under Network for the eth1 click Edit and change the 192.168.1.99 to anything that is not currently being used such as 192.168.1.200 then save and apply.
okay I got one setup and changed it to 192.168.1.
It seemed to work I was able to program it and set up a mining pool.. So I used
stratum.btcguild.com:3333 as pool 1
How long before it shows some hash? or do I have the wrong address for btcguild? does it need to be an http address and not stratum?
For my BTC mining, I use btcguild too. You have to specify the whole URL, i.e. "stratum+tcp://stratum.btcguild.com:3333"
All 4 of my antminer S1's have no problem with that with any of the 3 most recent firmwares
February 13, 2014, 12:09:08 PM
Hi,
Any reason why the S1 I ordered from Sushi was manufactured in Dec 2013 and has thermal paste everywhere, when I ordered two direct from Bitmain that were manufactured in Jan 2014 and are clean as a whistle?
I am generally happy with the service from Sushi, but I am not sure why this group buy's miners are older and have thermal paste oozing out the sides. All three were ordered within a week of each other and arrived on the same day (due to weather delays).
Any ideas?
Any reason why the S1 I ordered from Sushi was manufactured in Dec 2013 and has thermal paste everywhere, when I ordered two direct from Bitmain that were manufactured in Jan 2014 and are clean as a whistle?
I am generally happy with the service from Sushi, but I am not sure why this group buy's miners are older and have thermal paste oozing out the sides. All three were ordered within a week of each other and arrived on the same day (due to weather delays).
Any ideas?
I'm guessing you should be happy
the antminer I received today from Sushi has a date of 2013/11/18, is clearly used, and has a burned up cap (C549)... at least it runs...for now... I also ordered one from Bitmain the same day (2/5/2014) and it has a date of 2014/1/4, is clearly brand new and never used...
edit---I'll post a pic if anyone is interested...
On further examination it appears that C549 is part of the fan circuit... my guess is if I plug a fan into that connector it isn't going to work. I wonder if my unit was overclocked and run, by sushi or whoever, for the past 3 months before it was sold to me with the fan at full blast. It would explain the burnt cap. However, after 15 hours or so it is still hashing and stable at about 180gh...
February 13, 2014, 11:18:29 AM
Hi has anyone's status changed to shipped for 13th shipping yet [paid 10th], being in the UK will I receive a tracking service from UPS?
thanks
thanks
I believe all UPS delivery has tracking numbers. Just that USA customers has the UPS account so they can track their own packages.
If we can get the UPS shipment order, we can track our own package.
February 13, 2014, 10:09:53 AM
hey, is this PSU any good?
https://shop.strato.com/WebRoot/StoreFR/Shops/63047321/MediaGallery/Antec/VP500PC.pdf
it has 408 W on 12v but on 2 rails - 12V_1 - 21A, 12V_2 - 24A
does it have to be on single rail, or its ok?
https://shop.strato.com/WebRoot/StoreFR/Shops/63047321/MediaGallery/Antec/VP500PC.pdf
it has 408 W on 12v but on 2 rails - 12V_1 - 21A, 12V_2 - 24A
does it have to be on single rail, or its ok?
i been buying these corsair platinum's have 92% efficiency: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139039
and a got one these corsair golds too they are 92% efficiency as well: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139057
efficiency is a big play in this game ..
btw i had to wait on coinbase to go through so i hoping find some hardware to buy
i already have one ant and i really like those ..
Have you noticed Newegg and Amzn raised prices on platinum 860 psus lately.
February 13, 2014, 09:55:09 AM
Hi has anyone's status changed to shipped for 13th shipping yet [paid 10th], being in the UK will I receive a tracking service from UPS?
thanks
thanks
February 13, 2014, 08:44:14 AM
hey, is this PSU any good?
https://shop.strato.com/WebRoot/StoreFR/Shops/63047321/MediaGallery/Antec/VP500PC.pdf
it has 408 W on 12v but on 2 rails - 12V_1 - 21A, 12V_2 - 24A
does it have to be on single rail, or its ok?
https://shop.strato.com/WebRoot/StoreFR/Shops/63047321/MediaGallery/Antec/VP500PC.pdf
it has 408 W on 12v but on 2 rails - 12V_1 - 21A, 12V_2 - 24A
does it have to be on single rail, or its ok?
Not a good one but its more than enough for 1 overclocked Antminer S1
Jump to: