just an fyi if you are trying to solo mine you'll need a relay node to notify your miner that the block has changed else you will be working on old useless work.
Not true when solo mining with cgminer which checks for new blocks automatically and will update as soon as possible. 
Topic: Solo mining with BITMAIN AntMiner U1 (USB) (Read 5929 times)
yep if you got in the bfgminer folder and your on the same pc as the qt client and synced is running and you have added the bitcoin.conf file to were your wallet.dat file is located.. should work.. and make sure you run the bitcoin-cli.exe before you run bfgminer. and what ever pool you are relaying off use your pool login/password info so you can get info about the block the network is on.
Icon
Icon
So, I simply copy the below into a .cmd file, and run it?
d:\bfgminer\bfgminer -o 127.0.0.1:8332 -u x -p cat -o btcguild.gigaforge.com:3333 -u y -p egg --coinbase-addr 1JafVRe23oLSku4FBwBE3rJAKc9Y8wZM5z --coinbase-sig "Yep Icon did it again!"
Where I change the bfgminer to the path on my computer, and change the pass and user names to my username?
d:\bfgminer\bfgminer -o 127.0.0.1:8332 -u x -p cat -o btcguild.gigaforge.com:3333 -u y -p egg --coinbase-addr 1JafVRe23oLSku4FBwBE3rJAKc9Y8wZM5z --coinbase-sig "Yep Icon did it again!"
Where I change the bfgminer to the path on my computer, and change the pass and user names to my username?
just an fyi if you are trying to solo mine you'll need a relay node to notify your miner that the block has changed else you will be working on old useless work.
I suggest using a large pool as the relay node
example of my solo.bat file
@ echo off
d:\bfgminer\bfgminer -o 127.0.0.1:8332 -u x -p cat -o btcguild.gigaforge.com:3333 -u y -p egg --coinbase-addr 1JafVRe23oLSku4FBwBE3rJAKc9Y8wZM5z --coinbase-sig "Yep Icon did it again!"
O and add a coinbase-addr to tell the blockchain where to deposit the btc you mine
Icon
PS
Also if your solo mining with the newest bitcoinqt client the .0.9.1 you can still use the old bitcoin.conf file simple run the bitcoin-cli.exe file afterwards to get it to accept connections
example of the bitcoin.conf:
server=1
rpcuser=x
rpcpassword=y
rpcport=8332
rpcallowip=127.0.0.1
I suggest using a large pool as the relay node
example of my solo.bat file
@ echo off
d:\bfgminer\bfgminer -o 127.0.0.1:8332 -u x -p cat -o btcguild.gigaforge.com:3333 -u y -p egg --coinbase-addr 1JafVRe23oLSku4FBwBE3rJAKc9Y8wZM5z --coinbase-sig "Yep Icon did it again!"
O and add a coinbase-addr to tell the blockchain where to deposit the btc you mine
Icon
PS
Also if your solo mining with the newest bitcoinqt client the .0.9.1 you can still use the old bitcoin.conf file simple run the bitcoin-cli.exe file afterwards to get it to accept connections
example of the bitcoin.conf:
server=1
rpcuser=x
rpcpassword=y
rpcport=8332
rpcallowip=127.0.0.1
So, I am running the bitcoin core wallet, and it is synching. Where do I input the "bitcoin-qt.exe -rpcuser=username -rpcpassword=password -server -listen" at?
Which version are you using? Since 0.9.0, the RPC client has been removed from the bitcoin core wallet.
I am using Bitcoin Core v0.9.1.0-g026a939-beta (64-bit)
So, I am running the bitcoin core wallet, and it is synching. Where do I input the "bitcoin-qt.exe -rpcuser=username -rpcpassword=password -server -listen" at?
Which version are you using? Since 0.9.0, the RPC client has been removed from the bitcoin core wallet.
So, I am running the bitcoin core wallet, and it is synching. Where do I input the "bitcoin-qt.exe -rpcuser=username -rpcpassword=password -server -listen" at?
If your computer is on anyway, why not? The little USB stick is doing all the work so it's not slowing your computer down while it's doing its thing.
If you get lucky, good for you! If not, nothing lost really...
JWC
If you get lucky, good for you! If not, nothing lost really...
JWC
Solo mining can be fun, and is very much like playing the lottery. I have 5 U2s that solo mine. Is it likely they'll ever solve a block? Nope. I thought it was unlikely my S1 would solve a block, but last week it did just that... boy do I wish I was solo mining then.
It's unlikely I'll ever win the PowerBall either, yet I'll still buy a ticket or two. Winning that buys me a whole lot of hashing power
It's unlikely I'll ever win the PowerBall either, yet I'll still buy a ticket or two. Winning that buys me a whole lot of hashing power
What would your un:pw be?
Does getting a block make a difference ?
You can get 25btc + tx fee if you find a block.
Does getting a block make a difference ?
Have you been able to solo mine any SHA-256 altcoins?
with a couple ghs, megamultipool is your best bet.
When turning on some more verbose output in cgminer you seem to get a lot of these messages:
Any understanding of what that is about? It seems that Internets are very brief/not enlightening on this particular topic.
Best share 54.3K today, while 13K yesterday (you got it right, I just mine for fun with the computer while it is turned on).
[2014-02-16 14:37:00] ANU 0: Share above target
Any understanding of what that is about? It seems that Internets are very brief/not enlightening on this particular topic.
Best share 54.3K today, while 13K yesterday (you got it right, I just mine for fun with the computer while it is turned on).
The target your miner is referring to is the artificially lower pool share target. Unless your solo mining your miner has no idea what the true target (difficulty) of Bitcoin is.
How do you solo mine btc 
I have 10 BE that I will like to put on solo just for fun.
Anyone can help?
I have 10 BE that I will like to put on solo just for fun.Anyone can help?
I would love to have about 20 S1 Ants.
18 would be on BTCGuild and 2 I would let solo mine.
That would be great.
18 would be on BTCGuild and 2 I would let solo mine.
That would be great.
How to do it:
1) Get Bitcoin wallet https://bitcoin.org/en/download
2) Run Bitcoin wallet app: "bitcoin-qt.exe -rpcuser=username -rpcpassword=password -server -listen" and wait for the BTC blockchain go through (this takes serious time)
3) Get cgminer from v3.12.3 or later (this version has official support for AntMiner U1) http://ck.kolivas.org/apps/cgminer/
4) Run bitcoin mining software "cgminer.exe -o 127.0.0.1:8332 -u username -p password" and it will automatically start to mine with the U1 (ANU 0)
What's your best share? For me 21.3K today..
1) Get Bitcoin wallet https://bitcoin.org/en/download
2) Run Bitcoin wallet app: "bitcoin-qt.exe -rpcuser=username -rpcpassword=password -server -listen" and wait for the BTC blockchain go through (this takes serious time)
3) Get cgminer from v3.12.3 or later (this version has official support for AntMiner U1) http://ck.kolivas.org/apps/cgminer/
4) Run bitcoin mining software "cgminer.exe -o 127.0.0.1:8332 -u username -p password" and it will automatically start to mine with the U1 (ANU 0)
cgminer version 3.12.3 - Started: [2014-02-14 14:50:35]
--------------------------------------------------------------------------------
(5s):1.647G (avg):1.600Gh/s | A:0 R:0 HW:20 WU:22.5/m
ST: 2 SS: 0 NB: 51 LW: 0 GF: 0 RF: 0
Connected to
127.0.0.1 diff 2.62G without LP as user username
Block: c0d78cc9... Diff:2.62G Started: [17:38:39] Best share: 21.3K
--------------------------------------------------------------------------------
[P]ool management [ S]ettings [D]isplay options [Q]uit
ANU 0: | 1.595G/1.600Gh/s | A:0 R:0 HW:20 WU:22.5/m
--------------------------------------------------------------------------------
[2014-02-14 17:21:13] Network diff set to 2.62G
What's your best share? For me 21.3K today..
Please let us know when/if you ever find a block. Best of luck!
My U1 solo miner got a Best share of 8.88M today.
That'd have brought a block back in April, 2013
That'd have brought a block back in April, 2013
Just got my ant today and started on BTCGuild.....
BestShare
9,865,189
!!!! no block
My U1 solo miner got a Best share of 8.88M today.
That'd have brought a block back in April, 2013
That'd have brought a block back in April, 2013
Jump to: