Topic: Solution for ANTMINER S9 FANS SPEED Up & Down every 20 Seconds. - page 2. (Read 4508 times)

Thanks for this. I use this all the time now. I corrected a small typo above in "maincontainer"

Also, for the newbies, you have to first open the "Miner Configuration" tab. In Chrome, you can just mouse over the code and the window to the left highlights the area affected. To edit, right click to select edit as HTML, then you can just edit like any other text.
If you make a mistake don't worry, just exit and reload the page to start over.

Couldnt you just switch your faulty miner to one of the others controller board to make sure. This way you could end up with extra CB.

Chain 6 runs hot because of its position in the tube. There is not as much airflow over that board's heat sinks.

I rotate hash boards when cleaning.

****  UPDATE *****

Well I tried everything and still have same problem...  But now, the machine stops hashing after about 10-15 minutes...

I ordered a new controller board...several people told me that was the problem... that may or may not fix the fan problem?  We shall see..

Any other ideas?

GH

Anybody had the fans stop changing speeds on there own? I have 2 brand new Jan batch S9's that were speeding up and down. I was going to do this mod but they suddenly stopped. The fans are consistently running  5000 ,5200. Before they would go to about 6k and back down. Temps are 80, 72, 74. I don't know why chain 6 runs so much hotter but it does. I'm glad they stopped. I know that.

I keep mine in the basement which stays around 65 F all the time.  The fan speed set to 70% and is 3960 RPM.  Chip temps are 77, 71, 71.  I have it in an old cooler with 6" shrouds and insulated 6" vent hoses on each end.   It's nice and quiet and stays cool.  I also drilled a small hole on either side of the cooler and hooked up an old case fan to circulate air within the cooler, the apw3++ wires were warming the inside of the cooler to around 100F.  Now the inside of the cooler is a nice 66 F.

Here are the steps I use on Chrome:
1: fn+f12
2: Find the line that says (div id ="mainconatiner") and click the down arrow
3: In that, find the line that says (div id ="maincontent") and click the down arrow
4: In that, find the line that says (div class ="cbi-map" id ="cbi-miner" and click the down arrow
5: In that, find the line that says (fieldset class ="cbi-section" id = "cbi-bmminer-bmminer") and click the down arrow
6: In that, find the line that says (fieldset class ="cbi-section" id = "cbi-bmminer-default" style ="display:none) erase the :none to leave just "display" and
     click the down arrow
7: In that, find the line that says (div class = "cbi-value" id ="fan_crtl" style = "display:none" erase the :none to leave just "display"

You should now see the fan speed percentage in the gui.  Just click the box, set it to the number of your choosing (70 -75% seems to be good for my set up in a noise vs heat situation) and hit Save&Apply

Done!
Here are the pics if that helps https://imgur.com/a/hEn4k

Hello, its working fine for me, Temperatures are:

Temps (Chips 2) 80 76 77

I have other antminer S9 in the same room 82 81 79 and just realized it was auto-Fan, so I changed to Manual and set 70% and its now down 10 C° more.

Let me know how it worked for you.

Just seeing how your results are a month later?

Any noticeable issues or they quite happy?

Whats your temps now a 70% fan rate?

Try using Firefox, same command, FN+F12, in the console to find the string you can click Ctrl+F to find i allways look the word FAN, and work from there.

The miner must be on and connected to the local network.

Please let me know if it worked.

GR:

Excellent! hope it helped.

ok to I found the place to make the changes it but it would not let me edit that string at all or delete anything..

Do i have to take miner ofline to do this?

like it was locked and would not allow any changes.   tried everything numerous times. probably 10 times at least

Have not tried it with anything other than chrome. Thoughts?  When he says save is he referring to the page of the mining window?

Help please?

Thank YOU!  I will  try it with mozilla or IE as well today

all 4 of my other miners are fine...weird!

I tried using this with Google Chrome(and i didn't make it, maybe because I am stooopid). Anyways, downloaded Mozila Firefox, and it was easier to follow OPs instructions.

What browser are you using?

That's true in autofan mode. If we have the firmware source code it should be simple to disable the fan.

Help please...

when I hit FN+12 inspecot console appears but it does not look like yours and i cant find the place to even in put this..

mine is one of the new 13.5 s9 units..

any help please?

I think the software looks for a minimum fan speed to start hashing, and it is greater than 0.

Can you just set the fan speed manually to 0? If the firmware expects 0 then no fan should do exactly what it was commanded to do.

I'm sorry that is way off my knowlegde, but I will ask a friend programmer who maybe know.

Regards.

GRIVERO1983

Do you know of a way to modify it so that it will work with no fan connected at all? It would be useful for immersion cooling setups.

Very Interesting, thanks for sharing, could you post the page print of that mod. I wasn't sure to mess with the freq. because all my all my miners are autotune.

When you set the freq to xxx MHZ does the 3 boards set to the same fqcy?

Thanks.

GRIVERO