pointless accusing thread.
u can set static diff..that said this thread aims something else.
Hardly pointless as I was having an issue and seeking advice as well as wondering if others were experiencing this.
OP is using nicehash port for some reason.
edit: change your port to 2142, 2143 is high difficulty port for nicehash miners.
Huh strange, it worked all this time without fault. As you suggested I changed the port to 2142 and it's working much better now. Diff currently is 1088H.
Many thanks for your help!
EDIT: now there's another strange problem - before I was getting about 190H/s with Claymore v8. Now I've changed ports and the difficulty is lower, I'm only seeing a hashrate of 160 H/s
See here is the problem. When you set diff too low your card has to work harder having to reset job after share submittal thus causing a loss in hr because of the time it takes to submit a share You will always gain a little hr by setting a high diff share but it has a limit. You need to be able to submit at least one share per 2.5 min with bad luck. So I'd say you need to be able to submit one share every 20 seconds. So I'd have my diff set at max 20x my hashrate so that in the case of 10x luck share it at least has a chance unlike the 140x vardiff port. Most likely you will see a block change before you submit a share.. 140x leaves no room for bad luck causes more rejects and the weight of those rejects are much heavier. If the network diff wasn't rising like mad it wouldn't matter since variance would all even out. But that's not the case
A truly good pool will allow us to set our own diff. Anyone know of a pool that allows me to set my own diff? That would be ideal situation
Maybe dwarfpool implement this. I will test them for a few days. Pps when diff is skyrocketing only makes sense anyway
BR