Author

Topic: Some configs for S1 (Read 670 times)

hero member
Activity: 728
Merit: 500
cryptoshark
May 08, 2014, 06:45:00 AM
#6
right click on right bottom network icon open network settings
choose your card properties
and click on ip4 properties
then set static ip at 192.168.1.66
gateway 192.168.1.1

then go to 192.168.1.99
at wan settings set static address to 192.168.25.199 (or other number) and click save and apply

then go to ip4 again and set back

your ant should have network now and be accesible from computer
hero member
Activity: 616
Merit: 500
May 06, 2014, 07:57:37 AM
#5
Hi guys. I'm new with mining, etc.

I have seen lotta things teaching with the Gateway 192.168.1.x or 192.168.2.x

If my S1 have labeled 192.168.1.x or 192.168.2.x and my gateway is 192.168.25.x how do I set up the S1 to mine normally ??

I need a little help with that. Sorry if it sounds like a very novice question or if it has been already responded. But thanks anyway.

-
BTC  Smiley BTC  Smiley BTC


Check out https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970 or Dogie's guide https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s1-setup-hd-355387.  Basically you'll need to change the S1 WAN IP address to another static IP that is consistent with the address range/gateway of your router settings.  If there is a clear conflict like in your case ("my gateway is 192.168.25.x"), and you cannot log into the web gui of S1 using the static IP address on the sticker, you can use a stand-alone PC which you temporarily configure to have the gateway that can connect to the S1, change the S1 configuration (log into the web gui, get into the Network tab, edit the WAN IP address to a different static IP address that is compatible with your network). Then you can connect the S1 to your network and continue with the other parameter settings as described in the guides.  It's really easy, once you get familiar with the process it can be done in a few minutes.

Cheers
hero member
Activity: 756
Merit: 500
May 03, 2014, 04:16:38 PM
#4
ok.
KWH
legendary
Activity: 1904
Merit: 1045
In Collateral I Trust.
May 03, 2014, 03:07:25 PM
#3
Search for Ant S1 and you will find out for yourself. Lot of posts here on this subject as well as on Google.
hero member
Activity: 756
Merit: 500
May 03, 2014, 03:03:29 PM
#2
so I think this post was ridiculous...
hero member
Activity: 756
Merit: 500
May 02, 2014, 10:59:06 PM
#1
Hi guys. I'm new with mining, etc.

I have seen lotta things teaching with the Gateway 192.168.1.x or 192.168.2.x

If my S1 have labeled 192.168.1.x or 192.168.2.x and my gateway is 192.168.25.x how do I set up the S1 to mine normally ??

I need a little help with that. Sorry if it sounds like a very novice question or if it has been already responded. But thanks anyway.

-
BTC  Smiley BTC  Smiley BTC

Jump to: