Topic: Sp20 Help please (Read 1715 times)
Yeah its all secure and working good! thanks guys!
Oh yes i forgot to do jump my PSU, but its running now
Glad to hear it's running. If in correct spots I suggest using electrical tape to keep it in place. You really don't want your metal piece falling out (assuming you used metal piece and not switch).
Oh yes i forgot to do jump my PSU, but its running now
This sounds strange but i have no idea how i start this unit
i have connect everything correctly but as my experiance with pc it needs the ON button!
i have connect everything correctly but as my experiance with pc it needs the ON button!
here are ebay links to a jumper
http://www.ebay.com/itm/Antminer-Power-Supply-Jumper-Switch-PSU-Jumper-Switch-/111456532768?pt=US_Power_Cables_Connectors&hash=item19f353b920
http://www.ebay.com/itm/5pcs-JUMP-START-PSU-EPS-ATX-24PIN-POWER-SUPPLY-JUMPER-ON-OFF-switch-cable-50cm-/141482384015?pt=US_Power_Cables_Connectors&hash=item20f101da8f
okay what is your psu? did you jump your psu?
see my photos
lots here
https://bitcointalksearch.org/topic/unofficial-spondoolies-sp20-thread-872014
my jumpers are yellow
An "On" button? Um... the only switch would be on your PSU. You sure you have a proper PSU to power the SP20? You sure the PSU actually works? You sure you plugged in the 4 PCI-e connectors properly?
dont forget the jumper too
An "On" button? Um... the only switch would be on your PSU. You sure you have a proper PSU to power the SP20? You sure the PSU actually works? You sure you plugged in the 4 PCI-e connectors properly?
This sounds strange but i have no idea how i start this unit
i have connect everything correctly but as my experiance with pc it needs the ON button!
i have connect everything correctly but as my experiance with pc it needs the ON button!
Jump to: