SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 56.

Kaezar

newbie

Activity: 73

Merit: 0

Quote from: Rabotaet on March 08, 2019, 03:53:38 AM

Пoдcкaжитe. Mнe нe пoнятнo кaкoй aлгopитм yкaзывaть в кoнфигe для бyдyщeгo фopкa мoнepo?
B фaйлe ReadMe этo:
SUPPORTED ALGOS:
----------------
...
Cryptonight [normal]
Cryptonight V4 (R) [normalv4]
Cryptonight V4_64 [normalv4_64]
Cryptonight V7 [normalv7]
Cryptonight V8 [normalv8]

И гдe здecь Cryptonight R Huh

??

Code:

Cryptonight V4 (R) [normalv4]
Cryptonight V4_64 [normalv4_64]

A этo ктo?)))
Укaзывaй normalv4

Rabotaet

newbie

Activity: 15

Merit: 0

Пoдcкaжитe. Mнe нe пoнятнo кaкoй aлгopитм yкaзывaть в кoнфигe для бyдyщeгo фopкa мoнepo?
B фaйлe ReadMe этo:
SUPPORTED ALGOS:
----------------
Cryptonight Alloy [alloy]
Cryptonight ArtoCash [artocash]
Cryptonight B2N [b2n]
Cryptonight BitTubeV2 [bittubev2]
Cryptonight Conceal [conceal]
Cryptonight Dark [dark]
Cryptonight Fast [fast]
Cryptonight Fast2 [fast2]
Cryptonight Fest [festival]
Cryptonight Gpu [gpu]
Cryptonight Graft [graft]
Cryptonight Haven [haven]
Cryptonight Heavy [heavy]
Cryptonight Hospital [hospital]
Cryptonight Hycon [hycon]
Cryptonight Italo [italo]
Cryptonight Lite [lite]
Cryptonight Lite V7 [litev7]
Cryptonight MarketCash [marketcash]
Cryptonight Mox [mox]
Cryptonight [normal]
Cryptonight V4 (R) [normalv4]
Cryptonight V4_64 [normalv4_64]
Cryptonight V7 [normalv7]
Cryptonight V8 [normalv8]
Cryptonight StelliteV4 [stellitev4]
Cryptonight StelliteV5-V8-V9 [stellitev8]
Cryptonight Swap [swap]
Cryptonight Turtle [turtle]
Cryptonight Upx [upx]
Cryptonight Webchain [webchain]
Cryptonight Wownero [wownero]
Cryptonight Xcash [xcash]
Cryptonight Zelerius [zelerius]
И гдe здecь Cryptonight R Huh

??

Coindgr

hero member

Activity: 1034

Merit: 500

Graft just forked yesterday to new cryptonight algo, is this updated?

abhiseshakana

legendary

Activity: 2254

Merit: 2253

From Zero to 2 times Self-Made Legendary

Quote from: Csouza on March 07, 2019, 10:29:48 PM

I have a mixed rig with 2 rx580 and 4 Vega56@54 in auto the miner crashes, they set 112 intensity for RX580 4GB.

You should try to increase the virtual memory (page file) and make sure the HBCC segment had been disabled.

Btw, which driver version did you installed?

GKumaran

member

Activity: 204

Merit: 10

Not sure about the rx, but vega is rock stable, im running 6 vega 64, with almost the same settings as you in auto.

Csouza

member

Activity: 118

Merit: 10

Quote from: GKumaran on March 07, 2019, 10:23:42 PM

Quote from: Csouza on March 07, 2019, 05:34:24 PM

What is best setings for vegas56@64 on graft ?

core mem HS
Radeon RX 570 4GB     1200     1850   1126

Radeon RX 580 4GB     1150 2050   1154

Radeon RX Vega     1450     1100   1576

570 "intensity" : 59, "worksize" : 16, "threads" : 2, "fragments" : 8},
   580 "intensity" : 59, "worksize" : 16, "threads" : 2, "fragments" : 8},
Vega "intensity" : 112, "worksize" : 16, "threads" : 2, "fragments" : 8},

you can get 2500+ hr if you run it in auto- intensity : 0, double_threads=true

I have a mixed rig with 2 rx580 and 4 Vega56@54 in auto the miner crashes, they set 112 intensity for RX580 4GB.

GKumaran

member

Activity: 204

Merit: 10

Quote from: Csouza on March 07, 2019, 05:34:24 PM

What is best setings for vegas56@64 on graft ?

core mem HS
Radeon RX 570 4GB     1200     1850   1126

Radeon RX 580 4GB     1150 2050   1154

Radeon RX Vega     1450     1100   1576

570 "intensity" : 59, "worksize" : 16, "threads" : 2, "fragments" : 8},
   580 "intensity" : 59, "worksize" : 16, "threads" : 2, "fragments" : 8},
Vega "intensity" : 112, "worksize" : 16, "threads" : 2, "fragments" : 8},

you can get 2500+ hr if you run it in auto- intensity : 0, double_threads=true

4ward

member

Activity: 473

Merit: 18

--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)

do those need to always be comma separated values or a single value will be used for all cards?

Csouza

member

Activity: 118

Merit: 10

What is best setings for vegas56@64 on graft ?

core mem HS
Radeon RX 570 4GB     1200     1850   1126

Radeon RX 580 4GB     1150 2050   1154

Radeon RX Vega     1450     1100   1576

570 "intensity" : 59, "worksize" : 16, "threads" : 2, "fragments" : 8},
   580 "intensity" : 59, "worksize" : 16, "threads" : 2, "fragments" : 8},
Vega "intensity" : 112, "worksize" : 16, "threads" : 2, "fragments" : 8},

abg00

jr. member

Activity: 288

Merit: 1

hi dok
litle trouble on turtle and upx with old 2gb card
-i 0 work poor. set 172. need change 0 to 36

sharix80

newbie

Activity: 31

Merit: 0

Quote from: smen13 on March 07, 2019, 07:48:01 AM

Quote from: doktor83 on March 06, 2019, 02:46:58 PM

Quote from: akvilon888 on March 06, 2019, 02:37:16 PM

Quote from: doktor83 on March 06, 2019, 12:37:06 PM

Quote from: akvilon888 on March 06, 2019, 12:15:17 PM

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.

Yes its true,system freezes, same thing to me using rx550 2GB, i have also rx550 4GB and works fine, maybe 2GB Gpu's are out.

Use 27 intensity in config. If you start SRB on RX550 with auto setup, miner gives 29 intensity. Thats too much for RX550 2gb. This is the reason why rig freezes and goes to reboot.

Frianik

newbie

Activity: 23

Merit: 0

Quote from: doktor83 on March 07, 2019, 03:22:22 PM

Quote from: ?? on ??

Quote from: doktor83 on March 07, 2019, 03:05:53 PM

Quote from: Frianik on March 07, 2019, 03:03:24 PM

Quote from: doktor83 on March 07, 2019, 01:43:07 PM

Quote from: Frianik on March 07, 2019, 01:26:55 PM

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

it works in bat too, but you need to set cgpuid too so it knows for which gpu is which setting

https://i.ibb.co/bscxXcH/srb180.png
cpuid 0 = intel

remove word 'value' after --gpuintensity 😀

yeye i saw it after upload Tongue

just played with all possibilities. btw it ask define nuber of threads after all

and finally i start it from single bat

Code:

SRBMiner-CN.exe --gpureorder --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzz --cgpuid 1,2,3,4,5,6,7,8,9 --cgpuintensity 120,120,120,120,120,120,120,120,120 --cgputhreads 2,2,2,2,2,2,2,2,2 --logfile %LOGTIME% --apienable

upd. --cgpuid 1,2,3,4,5,6,7,8,9 is wrong define. right is --cgpuid 0,1,2,3,4,5,6,7,8 even if i use internal intel graphic which appears as gpu0 in regedit&overdriventool or 1 card is not workin

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: ?? on ??

Quote from: doktor83 on March 07, 2019, 03:05:53 PM

Quote from: Frianik on March 07, 2019, 03:03:24 PM

Quote from: doktor83 on March 07, 2019, 01:43:07 PM

Quote from: Frianik on March 07, 2019, 01:26:55 PM

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

it works in bat too, but you need to set cgpuid too so it knows for which gpu is which setting

cpuid 0 = intel

remove word 'value' after --gpuintensity 😀

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Frianik on March 07, 2019, 03:03:24 PM

Quote from: doktor83 on March 07, 2019, 01:43:07 PM

Quote from: Frianik on March 07, 2019, 01:26:55 PM

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

it works in bat too, but you need to set cgpuid too so it knows for which gpu is which setting

Frianik

newbie

Activity: 23

Merit: 0

Quote from: doktor83 on March 07, 2019, 01:43:07 PM

Quote from: Frianik on March 07, 2019, 01:26:55 PM

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

--cgpuintensity 120 wont work in bat. neiter --cgpuintensity 120,120,120,120,120,120,120,120,120 (9 vega rig)
Have made standalone txts and all work like a charm. 120int@vega64=2720h/s

AVP

newbie

Activity: 96

Merit: 0

Quote from: doktor83 on March 07, 2019, 01:57:20 PM

Quote from: ?? on ??

Running RX 570s on v1.8.0 on the new Graft algo with same settings / OC as before crashes / reboots my miner.

Anyone know what has to be changed for new algo to run? Less OC? More voltage? Or any other miner settings like intensity?

There is no before, as this is a new algorithm.
Try the auto setup for a start point

Ok, makes sense. What does auto setup do exactly?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: ?? on ??

Running RX 570s on v1.8.0 on the new Graft algo with same settings / OC as before crashes / reboots my miner.

Anyone know what has to be changed for new algo to run? Less OC? More voltage? Or any other miner settings like intensity?

There is no before, as this is a new algorithm.
Try the auto setup for a start point

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Frianik on March 07, 2019, 01:26:55 PM

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

First page or readme :

Code:

Parameters:

--ccryptonighttype value (algo to use)
--cgpuid value (gpu id, comma separated values, use --listdevices to see available)
--cgpuintensity value (gpu intensity, comma separated values)
--cgputhreads value (number of gpu threads, comma separated values)
--cgpuworksize value (gpu worksize, comma separated values)
--cgpufragments value(can be 0,1,2,4,8,16,32,64,128, comma separated values)
--cgpuheavymode value (mode for heavy algos (1, 2, 3), comma separated values)
--cgputhreaddelay value (delay to maintain between same gpu threads, 1 - 1000, comma separated values)
--cgputargettemperature value (gpu temperature, comma separated values)
--cgputargetfanspeed value (gpu fan speed in RPM, comma separated values)
--cgpuofftemperature value (gpu turn off temperature, comma separated values)
--cgpuadltype value (gpu adl to use (1 or 2), comma separated values)
--cgpuoldmode value (old kernel creation mode - true or false, comma separated values)

Also first page :

V1.8.0
.
.
- No more mixing of cmd line setup and config files, now it's one or the other

That's why nothing is read from config-graft.txt

Frianik

newbie

Activity: 23

Merit: 0

how to setup intensity through bat?

Code:

SRBMiner-CN.exe --gpureorder --config Config\config-graft.txt --ccryptonighttype graft --cpool pool.graft.hashvault.pro:7777 --cwallet zzzzzzzzzz --logfile %LOGTIME% --apienable

wont load intensity from config-graft.txt

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: swongsR1thing on March 07, 2019, 08:36:59 AM

But how

I get
"error cl_invalid_binary when calling clcreateprogramwithBinary [ctx - program] for DeviceID 0 (thread 0)
Error when doing initizalition stuff for GPUs"

Is this wrong path or what is this error?

maybe you have an onboard gpu that should be disabled

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 56. (Read 237247 times)