Swedish ASIC miner company kncminer.com - page 1260.

Emmie

newbie

Activity: 47

Merit: 0

Quote from: Searing on October 21, 2013, 06:03:14 AM

Searing

plz respon. plz Searing, seArinG plz

Quote from: Emmie on October 21, 2013, 05:27:57 AM

Quote from: Searing on October 21, 2013, 04:35:17 AM

Duuuude. You can put several quotes in one post. AND there's this magical button called "edit", which will let you change the contents of any of your previous posts! I know, crazy right?! Technology is wonderful.

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Phoenix1969 on October 20, 2013, 08:30:16 PM

its a pool difficulty setting.... settable in your pool options/account page ..maybe...if they allow it
although eligius says the min diff doesnt work yet...it does now, for the last 2 days... Tongue

ok I use slush...mainly cause i'm always reading about eligius being down or getting dos attacks or some such

not sure if true what I see

Searing

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Gyrsur on October 20, 2013, 04:06:41 PM

Quote from: soy on October 20, 2013, 03:48:40 PM

https://i.imgur.com/yDTHPNB.jpg

how or where to get this above out from the device?

damn your brave (those who are about to experiment I salute you) i'm still stitting on .95 and getting 550gh and its been on 3 days 'I an't touching nothing"

Searing

timmmers

sr. member

Activity: 1176

Merit: 265

Quote from: timmmers on October 21, 2013, 04:47:41 AM

Status in progress, actual status...DHL have it according to email. Somewhere lol.
Don't believe the KNC status, it's not accurate.

Fell for that one. It's gone nowhere, maybe not even built..just booked lol. Still, a little closer hopefully. May get it before Nov.

Emmie

newbie

Activity: 47

Merit: 0

Quote from: Searing on October 21, 2013, 04:35:17 AM

Duuuude. You can put several quotes in one post. AND there's this magical button called "edit", which will let you change the contents of any of your previous posts! I know, crazy right?! Technology is wonderful.

jelin1984

legendary

Activity: 2408

Merit: 1004

final which is the differnce between 4vrm version
and 8 vrm version?

more power electricity
want the 4 vrm from 8 vrm version?

what is the differnce? Huh

?

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Quote from: Bitcoinorama on October 18, 2013, 05:03:14 PM

Quote from: DigginDeep on October 18, 2013, 04:56:19 PM

Quote from: demonmaestro on October 18, 2013, 04:42:36 PM

WTF

Quote from: Bitcoinorama on October 17, 2013, 08:17:02 AM

You are a liar, you have no damn sources, you haven't a bloody clue where in Sweden the facility is.

Fact - Factory is open weekends - the damn Asics were delivered on a Sunday by Johan on a commercial flight, and DHL with a hand courier. 24 hours later the first prototype at full speed was filmed working.

Fact - the factory does not close at 10pm or we wouldn't have spent several days in there 24 hours around the clock.

Fact - you talk out of your arse, and when called upon started your own self-moderated thread bashing KnC for all their hard work and delete comments you don't agree with.

Fun with you has to stop now. Ciao.

So why do we have to wait till monday?

Same reason when on the 9th bitcoinroma claimed there were only 1000 units that needed to be shipped, but the have shipped over 1k units already just shown in the shipping updates, and they said starting Monday they will be up to 400 plus again shipping, someone lies out there teeth is why

Hold on, I hope you're not accusing me of lying there. All I did was ask, and relayed the response I was given. Don't go shooting the messenger bud, and yes the factory is open weekends as you well know because a) the chips arrived on a Sunday. I was there. b) Markus was there all last weekend with production in full swing.

Not acusing you of lying HOWEVER someone is not telling the full story. This coming tuesday will be 7 days out from PROMISED delivery. I am considering on taking my banks advice and pulling for a refund.

Its already NOON there and we want an update. How freaking hard is it to make a (1) Mercury miner? its only one bloody board.

timmmers

sr. member

Activity: 1176

Merit: 265

Status in progress, actual status...DHL have it according to email. Somewhere lol.
Don't believe the KNC status, it's not accurate.

sickpig

legendary

Activity: 1260

Merit: 1008

Quote from: kano on October 21, 2013, 04:28:08 AM

Quote from: Searing on October 21, 2013, 04:14:25 AM

Quote from: r3animation on October 18, 2013, 07:39:47 PM

Not sure if anyone has seen this or I'm late.

EnableCores (Use this patch to force all cores to enable at next reboot)

https://www.kncminer.com/pages/support

According to Bertmod, it enabled 1 last core on my Sat so all my cores are 100% working.

ok I missed how you tell if cores are working or not? where is that I just see temps on my kncminer screen

The 'kfcminer' screen spits out a message:
[2013-10-aa dd:ii:kk] KfC: core 0-36 was disabled due to 10 HW errors in a row

searing use this https://bitcointalksearch.org/topic/m.3376180

it's almost impossible to keep track of the cgminer output as long as you don't redirect the console output on a file.

edit1: I do agree with Xialla about frequency of your posts.. try to consolidate Tongue

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Gyrsur on October 19, 2013, 06:59:12 AM

Quote from: idee2013 on October 19, 2013, 06:58:09 AM

Quote from: Gyrsur on October 19, 2013, 06:30:05 AM

with firmware 0.9.5 I get a difference of ~45 Gh/s between closed and open case (~480 Gh/s vs. ~525 Gh/s).

going to try firmware 0.9.6 with closed case.

525 Gh/s closed or open case?

525 Gh/s open case with firmware 0.9.5

EDIT: in the meantime firmware 0.9.5 did reach 516.16 Gh/s with closed case. it seems to me it takes a while until it adjust to the max. level with closed case. my impression is with open case adjustment of max. level is faster.

550 open case in bsmt at 62 degrees F with a small stand alone fan blowing from left front corner to back right corner of unit at an angle to the fans/heat sinks...in order to get air circulating by the unit w/o messing up air flow of core fans....that got me to 550gh on .95 (again has been running w/o interruption since Friday when I put it up..why mess with success)

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: timmmers on October 19, 2013, 04:32:38 AM

Quote from: derekleong75 on October 19, 2013, 04:14:27 AM

Quote from: timmmers on October 19, 2013, 04:13:16 AM

Looking at the rise in the bitcoin exchange rate I cant help but wonder if people are seeing that mining won't break even, or is unaffordable and are buying instead to a greater extent?

Maybe the miners arent selling. Supply vs demand.

Possibly. Saving up for another round of nail biting on the next gen of rigs? lmao

ditto to get ROI back or double down say in feb for next round of "Searing vs the ASIC BEAST from non-fiat land"

btc_uzr

sr. member

Activity: 476

Merit: 250

let's have some fun

it's 11:27 am in Stockholm now and I just tried to call KnCMiner several times without success

Calling from my mobile => hang up after 3rd ring
Calling from landline => nobody picks up after 1-2min

similar experiences ?

edit:
tried it some more times until I was successfull
All my questions had been answered very detailed and I'm very happy with KnC support once more

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: Searing on October 21, 2013, 04:14:25 AM

Quote from: r3animation on October 18, 2013, 07:39:47 PM

Not sure if anyone has seen this or I'm late.

EnableCores (Use this patch to force all cores to enable at next reboot)

https://www.kncminer.com/pages/support

According to Bertmod, it enabled 1 last core on my Sat so all my cores are 100% working.

ok I missed how you tell if cores are working or not? where is that I just see temps on my kncminer screen

The 'kfcminer' screen spits out a message:
[2013-10-aa dd:ii:kk] KfC: core 0-36 was disabled due to 10 HW errors in a row

Xialla

legendary

Activity: 1036

Merit: 1001

/dev/null

Searing, could you please be so kind and try to consolidate your responses to one post?

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: FiatKiller on October 18, 2013, 08:22:30 PM

Quote from: joeventura on October 18, 2013, 07:38:05 PM

DHL does not even deliver in the U.S.

Now you are saying "Joe you are nuts!"

But I am not. DHL pawns their US deliveries off on USPS or UPS

http://seekingalpha.com/article/105325-dhl-shuts-down-u-s-delivery-operations-who-will-pick-up-the-slack

So they may have 90% of the rest of the world, they are a NON PLAYER in the U.S.

Guess who is a Player?!?! FED EX and U...P...S

DHL delivered mine today and they pickup at my job also.

hey thanks if I get another unit i'll have it delivered to my work...I work nites with only 1 place in the state to pick up dhl stuff (200 miles away) that would work well

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: kronut on October 18, 2013, 07:52:13 PM

The curious thing about Searings is that his passed customs without issues, while mine is stuck on clearance event like many others in here Today.

I called DHL and they said anything over $2500 needs clearance and it will take a few days, possibly incurring an import tax.

So that explains why all those mercuries went right through if you check the tracking thread, they are valued at $1995.

After looking up the tariffs with DHL on the phone, it's possible they will charge 2.5% + $25 for import + DHL fees.

Obviously I would rather have taken my chance with UPS, one guy got taxed on the knc forums and he paid $32 total.

really an import tax.. I had nothing on any of that arrived the same way a DVD movie comes just a bigger box with damage

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: kronut on October 18, 2013, 07:52:13 PM

The curious thing about Searings is that his passed customs without issues, while mine is stuck on clearance event like many others in here Today.

I called DHL and they said anything over $2500 needs clearance and it will take a few days, possibly incurring an import tax.

So that explains why all those mercuries went right through if you check the tracking thread, they are valued at $1995.

After looking up the tariffs with DHL on the phone, it's possible they will charge 2.5% + $25 for import + DHL fees.

Obviously I would rather have taken my chance with UPS, one guy got taxed on the knc forums and he paid $32 total.

heh..maybe my massively destroyed box helped in this...you could peel apart the inside and just look thru a vent inside ..no need for customs....(I can hear the custom guys..man this guy is gonna be so screwed when he gets this) oh and the fact it was filled with rainwater probably helped...sheesh..I've not done anything to it no reboot no nothing it has been running non-stop since Friday...knock wood....i'll ignore it if it likes to run that way......whatever works.

http://lostgonzo.imgur.com/

better sometimes to be lucky rather then smart

frankenmint

legendary

Activity: 1456

Merit: 1018

HoneybadgerOfMoney.com Weed4bitcoin.com

You should try to consolidate things...Useless and space taking I say.

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: r3animation on October 18, 2013, 07:39:47 PM

Not sure if anyone has seen this or I'm late.

EnableCores (Use this patch to force all cores to enable at next reboot)

https://www.kncminer.com/pages/support

According to Bertmod, it enabled 1 last core on my Sat so all my cores are 100% working.

ok I missed how you tell if cores are working or not? where is that I just see temps on my kncminer screen

Crypto_Cumbrian

member

Activity: 113

Merit: 10

Quote from: timmmers on October 21, 2013, 03:18:24 AM

Quote from: Crypto_Cumbrian on October 21, 2013, 03:15:31 AM

Got a RMA Number for 3 Faulty (under performing boards) on my Jupiter.

I asked about comp for my loss and for my Time , they will not offer any compensation.

Also the worrying thing is they Said and I Quote " The replacement boards can not be guaranteed to run at the Advertised speed as they are untested".

Well better go get some Thermal paste and await their return.

So they can''t test replacements before sending them? You could return bad boards and get more bad ones in return? That's poor.

Piss Poor.

Well the Boards are on the way to the post office.

My now 1 Board Jupiter is Hashing away at a Happy 140Gh/s on CGMiner and reporting 137Gh/s at BTC-Guild.

*Tip T20 required for Case, T8 required for Board to case and a PH1 required for Heat-Sink cross bar.

Topic: Swedish ASIC miner company kncminer.com - page 1260. (Read 3049528 times)