? 
Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 62. (Read 175032 times)
Not having any luck mining VEIL with this miner on Nlpool and suprnova. Miner starts registers card then just says connection error. Does something besided "t-rex -a x16rt -o stratum+tcp://veil.suprnova.cc:7220 -u USERNAME.WORKERNAME -p x" need to be added to command line??
?
How to register cards?
How to run NVIDIA cards on the miner, if there are NVIDIA and AMD cards on the farm?
T-rex will not run AMD cards. If you getting any error you can use -d parameter to choose nvidia gpus manually.
How to run NVIDIA cards on the miner, if there are NVIDIA and AMD cards on the farm?
How to run NVIDA cards on the miner, if there are NVIDEA and AMD cards on the farm?
I'm getting weird nvlddmkm errors when using T-Rex, every day, several times. They tend to break the miner, which then has to restart.
They all start with this in the event viewer:
the error could then be any of these:
Is anyone else experiencing this?
Is it a driver issue or is T-Rex messing something up?
They all start with this in the event viewer:
Quote from: Event Viewer
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
the error could then be any of these:
Quote
\Device\UVMLiteProcess12
Graphics SM Warp Exception on (GPC 2, TPC 0): Misaligned Address
The message resource is present but the message was not found in the message table
Graphics SM Warp Exception on (GPC 2, TPC 0): Misaligned Address
The message resource is present but the message was not found in the message table
Quote
\Device\UVMLiteProcess12
Graphics SM Global Exception on (GPC 2, TPC 0): Physical Multiple Warp Errors
The message resource is present but the message was not found in the message table
Graphics SM Global Exception on (GPC 2, TPC 0): Physical Multiple Warp Errors
The message resource is present but the message was not found in the message table
Quote
\Device\UVMLiteProcess12
Graphics Exception: ESR 0x514648=0x9000f 0x514650=0x24 0x514644=0xd3eff2 0x51464c=0x17f
The message resource is present but the message was not found in the message table
Graphics Exception: ESR 0x514648=0x9000f 0x514650=0x24 0x514644=0xd3eff2 0x51464c=0x17f
The message resource is present but the message was not found in the message table
Quote
\Device\UVMLiteProcess13
Graphics SM Warp Exception on (GPC 2, TPC 0): Out Of Range Address
The message resource is present but the message was not found in the message table
Graphics SM Warp Exception on (GPC 2, TPC 0): Out Of Range Address
The message resource is present but the message was not found in the message table
Quote
\Device\UVMLiteProcess13
Graphics Exception: ESR 0x514648=0x108000e 0x514650=0x20 0x514644=0xd3eff2 0x51464c=0x17f
The message resource is present but the message was not found in the message table
Graphics Exception: ESR 0x514648=0x108000e 0x514650=0x20 0x514644=0xd3eff2 0x51464c=0x17f
The message resource is present but the message was not found in the message table
Is anyone else experiencing this?
Is it a driver issue or is T-Rex messing something up?
Are Turing GPUs supported? my buddy getting 0MH/s on his 2060 trying to do RVN
Is PHI2 still supported?
Why do I keep getting an error, cant start miner, failed to get handler?
using driver 4.17.71
any ideas?
using driver 4.17.71
any ideas?
Im using msi AB. my settings are Power limit:65%, Temp limit: 60%, Fan speed 80%. rest is on 0 because i really dont know anything about clocking and i dont want to destroy my 1070. 
my celcius is now at 67c and how can i get higher Mhz in mining?
my celcius is now at 67c and how can i get higher Mhz in mining?Look up how to use msi AB on youtube.
Im using msi AB. my settings are Power limit:65%, Temp limit: 60%, Fan speed 80%. rest is on 0 because i really dont know anything about clocking and i dont want to destroy my 1070. my celcius is now at 67c and how can i get higher Mhz in mining?
my celcius is now at 67c and how can i get higher Mhz in mining? Hello guy im kinda new to mining! anyhow im using T-rex im running a Msi geforce gtx 1070 but my celcius is hitting 82c how can i limit that and how can i lower the whatt usage?
I recommend a program named "MSi Afterburner". I use it to set power limit, maximum temperature, overclocking, fan speed.
Hello guy im kinda new to mining! anyhow im using T-rex im running a Msi geforce gtx 1070 but my celcius is hitting 82c how can i limit that and how can i lower the whatt usage?
Hi,
your miner support lyra2vc0ban algo (c0ban coin)?
Thanks
your miner support lyra2vc0ban algo (c0ban coin)?
Thanks
No. The list of supported algorithms is in the first post.
Any solution on the issue described? It's quite annoying....
Please see my reply to x001tk above.
I'm using SMOS, so I can't really understand how the time can go back .... I will look for a way to provide you the log files, because linux is like a jungle to me.
Yeah, the issue with the clock was in SMOS.
Any solution on the issue described? It's quite annoying....
Please see my reply to x001tk above.
I'm using SMOS, so I can't really understand how the time can go back .... I will look for a way to provide you the log files, because linux is like a jungle to me.
Any solution on the issue described? It's quite annoying....
Please see my reply to x001tk above.
Hi, I have the same issue.
Have you found any solution on that?
Have you found any solution on that?
After inspecting the log files, the issue turned out to have been caused by the system clock going back and forth (the miner starts mining in year 2019, and then after a while the clock goes to 2036 which screws up scheduling engine used by the miner). If you could supply your log files so that I could look into whether your issue is caused by the same thing or not, that would be great. You can turn the logs on using "--protocol-dump -l trex.log" parameters as I suggested to bracinac. Thanks.
Hello, T-REX! Please add the mining algorithm "Rainforest". Thank you in advance.
Any updates coming for this miner?
There is no faster miner already so what's the point to update it? 
Too right, if it ain't broke don't fix it.
He might even have a faster miner ready to go in case the competition nudges ahead with a slightly faster miner. Could just release it the next day to stay one step ahead of the others.
If he releases an awesome miner now perhaps the competition would be able to figure out he did it (I don't know if dissecting a miner is possible but you never know).
On the flip side, if he has an updated miner that crushes it, a bunch more people might decide to give it a go and increase his market share.
Anyway, I'm happy with T-rex, way better than most of the miners out there.
Jump to: