Topic: T17+ S17+ S15 T15 K5 B7 DR3 DR5 S9SE Strong-U6 and others Overclock firmware (Read 803 times)

Antminer S15 and T15 OC and Voltage control firmware is now available. Contact me for purchase details

Here is the info on the performance of the new S17+ firmware

S17+ Model 76TH
(Factory Specs: Min = 73TH 3040 watts 40-42 W/T  Normal = 76TH 3340 watts 42-44 W/T   High = 79TH 3668 watts 44-46.5 W/T)

All Tests were done with 250 Volt AC power input Higher AC input voltage should lower the W/T even more and possibly gain extra has at these same settings. Safe temps are 80c or below higher temps may cause premature hardware failure.

640 Freq 1970 Voltage = 84.131TH    3210-3320 Watts    38.2 W/T

650 Freq 1970 Voltage = 84.991TH    3260-3365 Watts    38.3 W/T
650 Freq 1980 Voltage = 84.850TH    3300-3305 Watts    38.9 W/T

660 Freq 1970 Voltage = 85.187TH    3300-3310 Watts    38.8 W/T
660 Freq 1980 Voltage = 85.471TH    3340-3350 Watts    39.1 W/T
660 Freq 1990 Voltage = 85.531TH    3360-3370 Watts    39.4 W/T

670 Freq 1990 Voltage = 83.842TH    3400-3410 Watts    40.6 W/T

680 Freq 1990 Voltage = 81.368TH    3450-3460 Watts    42.4 W/T
680 Freq 2000 Voltage = 85.452TH    3495-3500 Watts    41.0 W/T
680 Freq 2010 Voltage = 84.624TH    3540-3550 Watts    41.7 W/T

690 Freq 2010 Voltage = 87.272TH    3600-3610 Watts    40.5 W/T

Best Max Setting to stay at Factory's lowest W/T Miner will go higher but the W/T starts to increase over 40 W/T
690 Freq 2020 Voltage = 89.795TH    3620-3650 Watts    40.5 W/T

T17+ Overclock under clock voltage control firmware available. 58TH @ 2600-2700w so far is most efficient

Strong U6 OC mod is now available. Add 10-30% increase in speed

Come join us on Discord for our Whatsminer M20s raffle while tickets are still available.

https://discord.gg/8cgtBcE

Update: Z11 AutoScan/Autotune Oc firmware is now available for purchase. See first post for details.

https://bitcointalksearch.org/topic/t17-s17-s15-t15-k5-b7-dr3-dr5-s9se-strong-u6-and-others-overclock-firmware-5244952

The S17+ will go as high as 100T + but is a use at your own risk due to the problems from the factory with the + models.  Either you get a good one or a bad one. The power at 100T is righ about 4100-4200watts. You can oc or under volt/clock them.

The K5 is the same 1500-1600gh @ 1800 watts.

I dont have much info on either because I used a loaner unit to make the mods. You can find out more info on my Discord CHannel where users share results.

Discord....    https://discord.gg/8cgtBcE

Could you write something more about the results after OC for both of them? I mean power consumption and hashrate (stable).

IMPORTANT ---- Z11 and Z15 firmware is no longer available from me. I will post more information how to obtain it from the new owners. Current customers I will still support updates when available.

Antminer S15 and T15 OC and voltage firmware is now available.

Strong U6 OC mod is now available. Add 10-30% increase in speed


Antminer Z11 Auto-Scan/Autotune OC firmware now available for purchase.
Reduces power consumption from a few watts to few hundred watts depending on your current settings.
138-140 K/sol under 1400 watts, Scans to the best freq near the target you select and voltage you have selected.

I have for sale the Antminer K5 custom firmware. Algorithm  CBK, voltage and frequency control globally below and above the standard bitmain limits.

Join me on Discord....    https://discord.gg/8cgtBcE

To purchase your licensed versions for the K5, Z11 and S17+ T17+ and other models Contact Me