Author

Topic: T9+ Not hashing (Read 313 times)

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

It should be work unless if the miner has other issues. Did you try flashing the miner through the web interface or in the dashboard?

And please do what we suggest above don't focus on flashing the hex file since you successfully flash it you shouldn't be a worry again with the program of the hashboard.

I suspecting PSU it seems it's not supplying enough power that is why your hashboard is not running properly.

Do you have any extra t9+ miner? if you have please try to swap the hashboard first to test if the issue is from the hashboard or control board.

rotem8866

newbie

Activity: 46

Merit: 0

I used the file from here: https://bitcointalksearch.org/topic/repair-a-t9-after-a-bad-firmware-lost-chain-5032987.

Quote

5 - Put in Hex File my Hex file extracted from good board (download here http://www.k-upload.fr/afficher-fichier-2018-09-19-103561fd6dspic33ep16g.hex.html )

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Where did you get the hex file?

Make sure that you flash the hashbord with a working hex file from a working t9+ miner if you just dump the hex file from the same miner it won't work.

That is why you need extra t9+ miner or request to someone here on the forum if they have a working hex file for t9+.

rotem8866

newbie

Activity: 46

Merit: 0

Hello.

I followed all procedure and flashing is done successfuly with PICKIT. after reconnecting all again i still have 000000 ghz. see kernel log. (i also flashed the official firmware to the controller.)

what can cause it ?

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000311] ps7-ttc #0 at df804000, irq=43
[    0.000618] Console: colour dummy device 80x30
[    0.000649] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.100251] pid_max: default: 32768 minimum: 301
[    0.100472] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100492] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102644] CPU: Testing write buffer coherency: ok
[    0.102978] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.103038] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.103260] L310 cache controller enabled
[    0.103280] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.181033] CPU1: Booted secondary processor
[    0.270229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270360] Brought up 2 CPUs
[    0.270379] SMP: Total of 2 processors activated.
[    0.270387] CPU: All CPU(s) started in SVC mode.
[    0.271047] devtmpfs: initialized
[    0.273472] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.274681] regulator-dummy: no parameters
[    0.282358] NET: Registered protocol family 16
[    0.284639] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.286921] cpuidle: using governor ladder
[    0.286934] cpuidle: using governor menu
[    0.294307] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.295821] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.295834] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.295948] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.317424] bio: create slab  at 0
[    0.318835] vgaarb: loaded
[    0.319535] SCSI subsystem initialized
[    0.320480] usbcore: registered new interface driver usbfs
[    0.320669] usbcore: registered new interface driver hub
[    0.320889] usbcore: registered new device driver usb
[    0.322168] media: Linux media interface: v0.10
[    0.322331] Linux video capture interface: v2.00
[    0.322572] pps_core: LinuxPPS API ver. 1 registered
[    0.322583] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.322707] PTP clock support registered
[    0.323067] EDAC MC: Ver: 3.0.0
[    0.324108] Advanced Linux Sound Architecture Driver Initialized.
[    0.326945] DMA-API: preallocated 4096 debug entries
[    0.326960] DMA-API: debugging enabled by kernel config
[    0.327035] Switched to clocksource arm_global_timer
[    0.347152] NET: Registered protocol family 2
[    0.347822] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.347878] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.347963] TCP: Hash tables configured (established 4096 bind 4096)
[    0.348009] TCP: reno registered
[    0.348027] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.348059] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.348295] NET: Registered protocol family 1
[    0.348640] RPC: Registered named UNIX socket transport module.
[    0.348653] RPC: Registered udp transport module.
[    0.348662] RPC: Registered tcp transport module.
[    0.348670] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.348683] PCI: CLS 0 bytes, default 64
[    0.349119] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.351135] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.353230] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.353414] msgmni has been set to 967
[    0.354197] io scheduler noop registered
[    0.354210] io scheduler deadline registered
[    0.354263] io scheduler cfq registered (default)
[    0.362865] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.362885] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.485434] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.054037] console [ttyPS0] enabled
[    1.058335] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.065935] [drm] Initialized drm 1.1.0 20060810
[    1.082864] brd: module loaded
[    1.092293] loop: module loaded
[    1.101735] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.107590] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.115343] libphy: XEMACPS mii bus: probed
[    1.119988] ------------- phy_id = 0x3625e62
[    1.124723] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.133354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.140011] ehci-pci: EHCI PCI platform driver
[    1.147250] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.154046] usbcore: registered new interface driver usb-storage
[    1.160921] mousedev: PS/2 mouse device common for all mice
[    1.167081] i2c /dev entries driver
[    1.173959] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.179510] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.185392] Xilinx Zynq CpuIdle Driver started
[    1.190256] sdhci: Secure Digital Host Controller Interface driver
[    1.196353] sdhci: Copyright(c) Pierre Ossman
[    1.200742] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.207517] mmc0: no vqmmc regulator found
[    1.211530] mmc0: no vmmc regulator found
[    1.247056] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255735] usbcore: registered new interface driver usbhid
[    1.261242] usbhid: USB HID core driver
[    1.265957] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.272258] nand: Micron MT29F2G08ABAEAWP
[    1.276222] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.282163] Bad block table found at page 131008, version 0x01
[    1.288390] Bad block table found at page 130944, version 0x01
[    1.294444] 3 ofpart partitions found on MTD device pl353-nand
[    1.300231] Creating 3 MTD partitions on "pl353-nand":
[    1.305325] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.313373] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320687] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.329639] TCP: cubic registered
[    1.332877] NET: Registered protocol family 17
[    1.337593] Registering SWP/SWPB emulation handler
[    1.343475] regulator-dummy: disabling
[    1.347819] UBI: attaching mtd1 to ubi0
[    1.873546] UBI: scanning is finished
[    1.885222] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.892302] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.899064] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.905729] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.912607] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.918587] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.925695] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 862493722
[    1.934650] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.943867] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.943872] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.947834] ALSA device list:
[    1.947837]   No soundcards found.
[    1.964211] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.993337] UBIFS: recovery needed
[    2.219536] UBIFS: recovery completed
[    2.223210] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.229155] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.238260] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.248149] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.253179] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[    2.264484] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.271212] devtmpfs: mounted
[    2.274323] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.113849] random: dd urandom read with 0 bits of entropy available
[    3.507063] 
[    3.507063] bcm54xx_config_init
[    4.117083] 
[    4.117083] bcm54xx_config_init
[    7.117908] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.123999] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   22.100699] In axi fpga driver!
[   22.103768] request_mem_region OK!
[   22.107190] AXI fpga dev virtual address is 0xdf9fc000
[   22.112265] *base_vir_addr = 0xc510
[   22.127201] In fpga mem driver!
[   22.130427] request_mem_region OK!
[   22.133987] fpga mem virtual address is 0xe2000000
[   22.927048] 
[   22.927048] bcm54xx_config_init
[   23.557049] 
[   23.557049] bcm54xx_config_init
[   26.557913] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   26.563933] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 80148c806f904814
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[1]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[1]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[1]! try again...
chain[1] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]! try again...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x03
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x03
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x11 0x11 0x11 0x11 0x12 0x21 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x11 0x12 0x11 0x10 0x11 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[1] ASIC[1] has core num=1
Chain[1] ASIC[2] has core num=1
Chain[1] ASIC[3] has core num=1
Chain[1] ASIC[4] has core num=1
Chain[1] ASIC[5] has core num=1
Chain[1] ASIC[6] has core num=1
Chain[1] ASIC[7] has core num=1
Chain[1] ASIC[8] has core num=1
Chain[1] ASIC[9] has core num=1
Chain[1] ASIC[10] has core num=1
Chain[1] ASIC[11] has core num=1
Chain[1] ASIC[12] has core num=1
Chain[1] ASIC[13] has core num=2
Chain[1] ASIC[14] has core num=2
Chain[1] ASIC[15] has core num=1
Chain[1] ASIC[16] has core num=1
Chain[1] ASIC[17] has core num=1
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x10 0x11 0x11 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x10 0x01 0x11 0x11 0x20 0x21 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x10 0x10 0x31 0x11 0x11 0x11 0x11 0x01 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[2] ASIC[0] has core num=1
Chain[2] ASIC[1] has core num=1
Chain[2] ASIC[2] has core num=1
Chain[2] ASIC[3] has core num=1
Chain[2] ASIC[4] has core num=1
Chain[2] ASIC[5] has core num=1
Chain[2] ASIC[6] has core num=1
Chain[2] ASIC[8] has core num=1
Chain[2] ASIC[9] has core num=1
Chain[2] ASIC[10] has core num=1
Chain[2] ASIC[11] has core num=1
Chain[2] ASIC[12] has core num=1
Chain[2] ASIC[13] has core num=1
Chain[2] ASIC[14] has core num=1
Chain[2] ASIC[15] has core num=1
Chain[2] ASIC[16] has core num=1
Chain[2] ASIC[17] has core num=1
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x11 0x31 0x11 0x11 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x10 0x01 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x10 0x11 0x11 0x11 0x21 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
Chain[3] ASIC[1] has core num=1
Chain[3] ASIC[2] has core num=1
Chain[3] ASIC[3] has core num=1
Chain[3] ASIC[4] has core num=1
Chain[3] ASIC[5] has core num=1
Chain[3] ASIC[6] has core num=3
Chain[3] ASIC[7] has core num=1
Chain[3] ASIC[8] has core num=1
Chain[3] ASIC[9] has core num=1
Chain[3] ASIC[10] has core num=1
Chain[3] ASIC[11] has core num=1
Chain[3] ASIC[12] has core num=1
Chain[3] ASIC[13] has core num=1
Chain[3] ASIC[14] has core num=1
Chain[3] ASIC[15] has core num=1
Chain[3] ASIC[16] has core num=1
Chain[3] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
Chain[8] ASIC[0] has core num=2
Chain[8] ASIC[2] has core num=1
Chain[8] ASIC[3] has core num=1
Chain[8] ASIC[4] has core num=1
Chain[8] ASIC[5] has core num=2
Chain[8] ASIC[6] has core num=1
Chain[8] ASIC[7] has core num=1
Chain[8] ASIC[8] has core num=1
Chain[8] ASIC[10] has core num=1
Chain[8] ASIC[11] has core num=1
Chain[8] ASIC[12] has core num=1
Chain[8] ASIC[13] has core num=1
Chain[8] ASIC[14] has core num=1
Chain[8] ASIC[15] has core num=1
Chain[8] ASIC[16] has core num=1
Chain[8] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
Chain[9] ASIC[0] has core num=1
Chain[9] ASIC[1] has core num=1
Chain[9] ASIC[2] has core num=1
Chain[9] ASIC[3] has core num=1
Chain[9] ASIC[4] has core num=1
Chain[9] ASIC[5] has core num=1
Chain[9] ASIC[6] has core num=1
Chain[9] ASIC[7] has core num=1
Chain[9] ASIC[8] has core num=1
Chain[9] ASIC[9] has core num=1
Chain[9] ASIC[10] has core num=1
Chain[9] ASIC[11] has core num=1
Chain[9] ASIC[12] has core num=1
Chain[9] ASIC[13] has core num=1
Chain[9] ASIC[14] has core num=1
Chain[9] ASIC[15] has core num=1
Chain[9] ASIC[16] has core num=1
Chain[9] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
Chain[10] ASIC[0] has core num=1
Chain[10] ASIC[1] has core num=1
Chain[10] ASIC[2] has core num=1
Chain[10] ASIC[3] has core num=1
Chain[10] ASIC[4] has core num=1
Chain[10] ASIC[5] has core num=1
Chain[10] ASIC[6] has core num=1
Chain[10] ASIC[9] has core num=1
Chain[10] ASIC[10] has core num=1
Chain[10] ASIC[11] has core num=1
Chain[10] ASIC[12] has core num=1
Chain[10] ASIC[13] has core num=1
Chain[10] ASIC[14] has core num=2
Chain[10] ASIC[16] has core num=2
Chain[10] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
Chain[11] ASIC[0] has core num=1
Chain[11] ASIC[2] has core num=1
Chain[11] ASIC[4] has core num=3
Chain[11] ASIC[5] has core num=1
Chain[11] ASIC[6] has core num=1
Chain[11] ASIC[7] has core num=1
Chain[11] ASIC[8] has core num=1
Chain[11] ASIC[9] has core num=1
Chain[11] ASIC[10] has core num=1
Chain[11] ASIC[11] has core num=1
Chain[11] ASIC[12] has core num=1
Chain[11] ASIC[13] has core num=1
Chain[11] ASIC[15] has core num=1
Chain[11] ASIC[16] has core num=1
Chain[11] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
Chain[12] ASIC[0] has core num=1
Chain[12] ASIC[1] has core num=1
Chain[12] ASIC[2] has core num=1
Chain[12] ASIC[3] has core num=1
Chain[12] ASIC[4] has core num=1
Chain[12] ASIC[5] has core num=1
Chain[12] ASIC[6] has core num=1
Chain[12] ASIC[7] has core num=1
Chain[12] ASIC[8] has core num=1
Chain[12] ASIC[11] has core num=1
Chain[12] ASIC[12] has core num=1
Chain[12] ASIC[13] has core num=1
Chain[12] ASIC[14] has core num=1
Chain[12] ASIC[15] has core num=1
Chain[12] ASIC[16] has core num=1
Chain[12] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
Chain[13] ASIC[0] has core num=1
Chain[13] ASIC[1] has core num=1
Chain[13] ASIC[2] has core num=1
Chain[13] ASIC[3] has core num=1
Chain[13] ASIC[4] has core num=1
Chain[13] ASIC[5] has core num=1
Chain[13] ASIC[6] has core num=1
Chain[13] ASIC[8] has core num=1
Chain[13] ASIC[9] has core num=1
Chain[13] ASIC[10] has core num=1
Chain[13] ASIC[11] has core num=1
Chain[13] ASIC[12] has core num=1
Chain[13] ASIC[13] has core num=1
Chain[13] ASIC[14] has core num=2
Chain[13] ASIC[15] has core num=1
Chain[13] ASIC[16] has core num=1
Chain[13] ASIC[17] has core num=1
get PIC voltage=11 on chain[1], value=870
get PIC voltage=1 on chain[2], value=930
get PIC voltage=1 on chain[3], value=930
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=1 on chain[10], value=930
get PIC voltage=1 on chain[11], value=930
get PIC voltage=1 on chain[12], value=930
get PIC voltage=1 on chain[13], value=930
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
chain[12] temp chip I2C addr=0x98
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1451 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80148c806f904814
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
Checking fans!get fan[5] speed=5760
get fan[2] speed=6120
get fan[5] speed=5760
get fan[2] speed=6120
get fan[5] speed=5760
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
chain[1] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x11 0x11 0x11 0x11 0x12 0x21 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x11 0x12 0x11 0x10 0x11 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x03
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x10 0x11 0x11 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x10 0x01 0x11 0x11 0x20 0x21 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x10 0x10 0x31 0x11 0x11 0x11 0x11 0x01 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x03
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x11 0x31 0x11 0x11 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x10 0x01 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x10 0x11 0x11 0x11 0x21 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=1 value=930
Chain[J3] will use backup chain_voltage_pic=870 [11]
Chain[J3] get working chain_voltage_pic=11
Chain[J4] orignal chain_voltage_pic=1 value=930
Chain[J4] will use backup chain_voltage_pic=870 [11]
Chain[J4] get working chain_voltage_pic=11
Chain[J9] orignal chain_voltage_pic=11 value=870
Chain[J10] orignal chain_voltage_pic=11 value=870
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 4 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 5 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 6 time
Chain[J2] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s

Miner fix freq ...
max freq = 100
set baud=1
setStartTimePoint total_tv_start_sys=283 total_tv_end_sys=284
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

rotem8866

newbie

Activity: 46

Merit: 0

ordered pickit and i hope for good
thanks

thierry4wd

sr. member

Activity: 446

Merit: 347

hi, i look your kernel log, and your problem is ONLY on your PIC !!! Probabely the firmware is bad ...

at first time, flash your T9+ by web page ( Antminer-T9-PLUS-all-201711242319-autofreq-user-Update2UBI-NF.tar.gz ).

Turn off your miner, and take out your boards.

Follow my tutorial https://bitcointalksearch.org/topic/repair-a-t9-after-a-bad-firmware-lost-chain-5032987.

Enjoy !!!!

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Try to follow these steps below.

- First, try to hard reset it first you can follow the guide from here How to reset miner to factory settings Ignore the 2nd method and make sure to follow the 1st and 3rd method then test it again.

- Flash the miner through WebGUI you can download the firmware from here Antminer-T9-PLUS-all-201711242319-autofreq-user-Update2UBI-NF.tar.gz Then test it again if it works.

- Flash the hashboard with Pickit 3 with working hex you can revive the hashboard if you have a working hex file and if it's related to a program. If it's a hardware issue you can follow the step below.

- Replace new working hashboard or if you have extra miner test them one by on. You can follow the guide here Test hash board one by one

rotem8866

newbie

Activity: 46

Merit: 0

Hello

I got Antminer T9+ I rebooted it a few times, made recovery from sd card , changed psu and cables and nothing - boards not appears. attached screen shot and logs. what can i do?

Thanks

https://imgur.com/a/YAurGJV

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000306] ps7-ttc #0 at df804000, irq=43
[    0.000617] Console: colour dummy device 80x30
[    0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040203] pid_max: default: 32768 minimum: 301
[    0.040422] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040441] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042594] CPU: Testing write buffer coherency: ok
[    0.042926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042985] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043207] L310 cache controller enabled
[    0.043226] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121029] CPU1: Booted secondary processor
[    0.210224] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210354] Brought up 2 CPUs
[    0.210373] SMP: Total of 2 processors activated.
[    0.210382] CPU: All CPU(s) started in SVC mode.
[    0.211054] devtmpfs: initialized
[    0.213470] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214673] regulator-dummy: no parameters
[    0.221894] NET: Registered protocol family 16
[    0.224141] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226432] cpuidle: using governor ladder
[    0.226445] cpuidle: using governor menu
[    0.233798] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235314] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235327] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235438] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257234] bio: create slab  at 0
[    0.258640] vgaarb: loaded
[    0.259367] SCSI subsystem initialized
[    0.260641] usbcore: registered new interface driver usbfs
[    0.260832] usbcore: registered new interface driver hub
[    0.261203] usbcore: registered new device driver usb
[    0.262132] media: Linux media interface: v0.10
[    0.262291] Linux video capture interface: v2.00
[    0.262532] pps_core: LinuxPPS API ver. 1 registered
[    0.262543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262665] PTP clock support registered
[    0.263023] EDAC MC: Ver: 3.0.0
[    0.264057] Advanced Linux Sound Architecture Driver Initialized.
[    0.266872] DMA-API: preallocated 4096 debug entries
[    0.266887] DMA-API: debugging enabled by kernel config
[    0.266964] Switched to clocksource arm_global_timer
[    0.286870] NET: Registered protocol family 2
[    0.287586] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287643] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287729] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287774] TCP: reno registered
[    0.287790] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287822] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288058] NET: Registered protocol family 1
[    0.288406] RPC: Registered named UNIX socket transport module.
[    0.288419] RPC: Registered udp transport module.
[    0.288427] RPC: Registered tcp transport module.
[    0.288436] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288449] PCI: CLS 0 bytes, default 64
[    0.288879] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290902] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292988] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293189] msgmni has been set to 967
[    0.293972] io scheduler noop registered
[    0.293985] io scheduler deadline registered
[    0.294041] io scheduler cfq registered (default)
[    0.303818] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.303838] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427992] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.995682] console [ttyPS0] enabled
[    0.999948] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.007585] [drm] Initialized drm 1.1.0 20060810
[    1.024512] brd: module loaded
[    1.033808] loop: module loaded
[    1.042917] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.048953] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.056673] libphy: XEMACPS mii bus: probed
[    1.061066] ------------- phy_id = 0x3625e62
[    1.065798] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.074739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.081630] ehci-pci: EHCI PCI platform driver
[    1.088866] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.095667] usbcore: registered new interface driver usb-storage
[    1.102557] mousedev: PS/2 mouse device common for all mice
[    1.108686] i2c /dev entries driver
[    1.115540] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.121087] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.127019] Xilinx Zynq CpuIdle Driver started
[    1.131870] sdhci: Secure Digital Host Controller Interface driver
[    1.137991] sdhci: Copyright(c) Pierre Ossman
[    1.142304] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.149170] mmc0: no vqmmc regulator found
[    1.153184] mmc0: no vmmc regulator found
[    1.197005] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205687] usbcore: registered new interface driver usbhid
[    1.211203] usbhid: USB HID core driver
[    1.215890] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222181] nand: Micron MT29F2G08ABAEAWP
[    1.226156] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232100] Bad block table found at page 131008, version 0x01
[    1.238331] Bad block table found at page 130944, version 0x01
[    1.244385] 3 ofpart partitions found on MTD device pl353-nand
[    1.250151] Creating 3 MTD partitions on "pl353-nand":
[    1.255256] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263318] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270638] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279582] TCP: cubic registered
[    1.282820] NET: Registered protocol family 17
[    1.287550] Registering SWP/SWPB emulation handler
[    1.293427] regulator-dummy: disabling
[    1.297781] UBI: attaching mtd1 to ubi0
[    1.823495] UBI: scanning is finished
[    1.835087] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842168] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.848930] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.855594] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.862472] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.868452] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.875560] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1785240847
[    1.884602] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.893819] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.893825] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.897797] ALSA device list:
[    1.897801]   No soundcards found.
[    1.914148] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.943324] UBIFS: recovery needed
[    2.093323] UBIFS: recovery completed
[    2.097028] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.102951] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.112084] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.121969] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.127010] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B89507E3-1A5F-40A2-9F52-C7513B9EEBEC, small LPT model
[    2.138293] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.145014] devtmpfs: mounted
[    2.148151] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.982459] random: dd urandom read with 0 bits of entropy available
[    3.357013] 
[    3.357013] bcm54xx_config_init
[    3.977017] 
[    3.977017] bcm54xx_config_init
[    6.977828] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.983918] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.990899] In axi fpga driver!
[   20.993974] request_mem_region OK!
[   20.997400] AXI fpga dev virtual address is 0xdf9fc000
[   21.002482] *base_vir_addr = 0xc510
[   21.017615] In fpga mem driver!
[   21.020704] request_mem_region OK!
[   21.024251] fpga mem virtual address is 0xe2000000
[   21.887013] 
[   21.887013] bcm54xx_config_init
[   22.526996] 
[   22.526996] bcm54xx_config_init
[   25.527822] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.533839] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  624.326262] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = T9+
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
chain[1] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
chain[1] PIC need restore ...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
After restore: chain[1] PIC fw version=0xff
chain[1] PIC need restore ...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
After restore: chain[1] PIC fw version=0xff
chain[2] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
chain[2] PIC need restore ...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
After restore: chain[2] PIC fw version=0xff
chain[2] PIC need restore ...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
After restore: chain[2] PIC fw version=0xff
chain[3] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
Check chain[3] PIC fw version=0xff
chain[3] PIC need restore ...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
After restore: chain[3] PIC fw version=0xff
chain[3] PIC need restore ...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
After restore: chain[3] PIC fw version=0xff
Chain[J2] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

Chain[J3] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

Chain[J4] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!

Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Fix freq=400 Chain[1] voltage_pic=1 value=930
Fix freq=400 Chain[2] voltage_pic=1 value=930
Fix freq=400 Chain[3] voltage_pic=1 value=930
Fix freq=400 Chain[8] voltage_pic=1 value=930
Fix freq=400 Chain[9] voltage_pic=1 value=930
Fix freq=400 Chain[10] voltage_pic=1 value=930
Fix freq=400 Chain[11] voltage_pic=1 value=930
Fix freq=400 Chain[12] voltage_pic=1 value=930
Fix freq=400 Chain[13] voltage_pic=1 value=930
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J2] has 0 asic
Chain[J3] has 0 asic
Chain[J4] has 0 asic
Chain[J9] has 0 asic
Chain[J10] has 0 asic
Chain[J11] has 0 asic
Chain[J12] has 0 asic
Chain[J13] has 0 asic
Chain[J14] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s

Miner fix freq ...
max freq = 100
set baud=19
setStartTimePoint total_tv_start_sys=194 total_tv_end_sys=195
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0