Pool for mining TakenCoin
http://92.51.46.40/getting_started
-o stratum+tcp://http://92.51.46.40:4000 -u your wallet address -p any (diff-auto)
comission 1.5%
Good luck!
Topic: TakenCoin - page 2. (Read 4681 times)
Huge supply, huge premine, no road map, no basic foundation why it should exist, etc...
This one will just die down easily.
The dev will just dump his premine.
I'll just watch how this project will vanish into thin air easily.
This one will just die down easily.
The dev will just dump his premine.
I'll just watch how this project will vanish into thin air easily.
TakenCoin [TAKE] is listed: https://yobit.net/en/trade/TAKE/BTC …
TakenCoin Dice: https://yobit.net/en/dice/TAKE
congrat and good luck in trading
TakenCoin Dice: https://yobit.net/en/dice/TAKE
congrat and good luck in trading
Any active exchange?
Damn big hashrate 
All is ok with chain and wallets.
CoinMiners.Net pool working.
CoinMiners.Net pool working.
Congratz then
I've just recompiled everything again deleting all and got the same result:
"version" : "v1.0.0.0",
"protocolversion" : 60015,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 114,
"timeoffset" : 0,
"moneysupply" : 540109000.00000000,
"connections" : 2,
"proxy" : "",
"ip" : "82.223.66.160",
"difficulty" : {
"proof-of-work" : 2202.65491891,
"proof-of-stake" : 0.00390625
},
"testnet" : false,
"keypoololdest" : 1492084925,
"keypoolsize" : 101,
"paytxfee" : 0.00010000,
"mininput" : 0.00000000,
"errors" : ""
}
Linux wallet working on another blockchain.
Np I give up !
What chain please?
Can you post a getinfo to see how many mined blocks in your pool?
Thanks!
Can you post a getinfo to see how many mined blocks in your pool?
Thanks!
Mate you look a bit confused, if you can't set up a proper pool go home chain is working good
Agreed. Chain is working good and same with Windows wallet.
I dunno what is wrong with your config
Source has some missing files, but easy to compile after adding. Took 10 minutes to prepare the pool.
I suggest you to recompile and use
addnode=coinminers.net at first start. It will quarantee the chain sync.
Also:
{
"version" : "v1.0.0.0",
"protocolversion" : 60015,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 10835.00000000,
"stake" : 0.00000000,
"blocks" : 288,
"timeoffset" : 0,
"moneysupply" : 540283000.00000000,
"connections" : 3,
"proxy" : "",
"ip" : "81.21.164.231",
"difficulty" : {
"proof-of-work" : 616318.79137049,
"proof-of-stake" : 0.00390625
},
"testnet" : false,
"keypoololdest" : 1492081259,
"keypoolsize" : 101,
"paytxfee" : 0.00010000,
"mininput" : 0.00000000,
"errors" : ""
What chain please?
Can you post a getinfo to see how many mined blocks in your pool?
Thanks!
Can you post a getinfo to see how many mined blocks in your pool?
Thanks!
Mate you look a bit confused, if you can't set up a proper pool go home chain is working good
TAKEN is ready in our pool (1hr payment period) 
CoinMiners.Net
1,5% Fee
Register-free Mining & Auto Payments
Server located at Europe
What chain please?
Can you post a getinfo to see how many mined blocks in your pool?
Thanks!
I recompiled Windows Wallet from zero using github sources:
{
"version" : "v1.0.0.0",
"protocolversion" : 60015,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 268,
"timeoffset" : 0,
"moneysupply" : 540263000.00000000,
"connections" : 1,
"proxy" : "",
"ip" : "88.15.4.72",
"difficulty" : {
"proof-of-work" : 2668.35516837,
"proof-of-stake" : 0.00390625
},
"testnet" : false,
"keypoololdest" : 1492080297,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00000000,
"errors" : ""
}
And still reporting different chain.
Dont know what's happening wieh this coin, but nothing good!
EDIT: I'll remove this coin from my pool.
{
"version" : "v1.0.0.0",
"protocolversion" : 60015,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 268,
"timeoffset" : 0,
"moneysupply" : 540263000.00000000,
"connections" : 1,
"proxy" : "",
"ip" : "88.15.4.72",
"difficulty" : {
"proof-of-work" : 2668.35516837,
"proof-of-stake" : 0.00390625
},
"testnet" : false,
"keypoololdest" : 1492080297,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00000000,
"errors" : ""
}
And still reporting different chain.
Dont know what's happening wieh this coin, but nothing good!
EDIT: I'll remove this coin from my pool.
Get masternode , privacy protocol, and instasend and im in.
Love taken
Love taken
Pool owner not compile wallet versions ok.
Lol I did,
But sources are not correct!
Windows wallet is not on same chain as linux wallet.
So thats dev fault, not pool fault.
Dev must update windows wallet.
I could try to, but that is dev job!
Ok I'll try
Will let you know if it works
Pool owner not compile wallet versions ok.
Lol I did,
But sources are not correct!
Windows wallet is not on same chain as linux wallet.
So thats dev fault, not pool fault.
Dev must update windows wallet.
I could try to, but that is dev job!
Ok I'll try
Will let you know if it works
Pool owner not compile wallet versions ok.
Lol I did,
But sources are not correct!
Windows wallet is not on same chain as linux wallet.
So thats dev fault, not pool fault.
Dev must update windows wallet.
I could try to, but that is dev job!
Pool owner not compile wallet versions ok.
Lol I did,
But sources are not correct!
Windows wallet is not on same chain as linux wallet.
So thats dev fault, not pool fault.
Dev must update windows wallet.
I could try to, but that is dev job!
Pool owner not compile wallet versions ok.
Sourse github and wallet, are not the same.
premine takencoin is 570 million coin
any alocation premine coin to bounty dev, i think is total premine is big
any alocation premine coin to bounty dev, i think is total premine is big
On the pool the blocks move. And in the wallet the number of blocks does not change.
Jump to: