Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 43.

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: KillrBee on December 08, 2021, 10:05:21 AM

Not a huge issue or anything, but in version 1.31 I'm getting the message "GPU# XIntensity set to ####" twice for each AMD card.

Fixed in v1.32.

I just recieved a 3070LHR today so will finetune abit before releasing 1.32. The LHR detection and reset device is working pretty good. The 3080ti almost never goto LHR mode, so our LHR code is stable even on the latest drivers.

KillrBee

jr. member

Activity: 139

Merit: 3

Not a huge issue or anything, but in version 1.31 I'm getting the message "GPU# XIntensity set to ####" twice for each AMD card.

Dojo76

newbie

Activity: 30

Merit: 0

Quote from: sp_ on December 06, 2021, 06:11:29 AM

Quote from: sxemini on December 06, 2021, 05:56:05 AM

I get 34,4 mh on my 6600xt. After 24h no reject share on rustpool and ethermine.
But ETC+Zil will not work for me. Cannot subscribe to the pool.

I have created a ticked for this. We will look into it.

https://github.com/sp-hash/TeamBlackMiner/issues/179

Quote from: Dojo76 on December 06, 2021, 05:36:07 AM

Upgrade to v1.30. I got less than 0.5% rejects in my test.

I upgraded yesterday, in about 12h only 11 rejected shares (0,22%). Wonderful job, you're very close to perfection in Hiveon pool, huge improvement. I noticed that all the rejected are basically in the first minutes after miner is started, then almost no rejected ones until is restarted, it seems like pool and miner needs some minutes to adjust

Did a small change and now I get 0 rejects on the hiveon pool. Will let it run for a while.

edit: 0% rejects and 0% stale in the LHR card testrig on the hiveon pool..

Small changes to the stratum code can break compatibility with other pools, so we need more testing.

I upgraded to 1.31, rejected shares are very low also with AMD cards if I add '--amd-only' parameter, it seems miner runs more stable. I noticed that 2 out of 6 RX 6600 XT have no stats, it also looks like the order in miner (GPU0,GPU1...) is reversed compared to HiveOS order. I'm on the latest AMD drivers.

Can you confirm the cosmetic issue?

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

LHR detector implemented. So perhaps lhr+autotune in the next build.

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: swogerino on December 07, 2021, 06:16:40 AM

in my not so stable rig so far.

If your rig is unstable don't mine eth+zil because the dag creation is difficult for the graphic card.
Or add --dagintensity 1 . Tested it for 20 minutes, and everything looks normal. 1 reported stale in TBM, 2 on the pool

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Quote from: sp_ on December 07, 2021, 06:05:36 AM

Thanks for testing, I will try a rig on Ezil. Do you have a logfile I can look at for more information?

Unfortunately no,it just said stratum thread closed after waiting for x% of seconds in yellow text as the error,if I pressed a key it continue to mine for another half hour and then the same error happens.My cards are as always the Rx 6800 XT-s and GTX 1080 ti in my not so stable rig so far.

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Thanks for testing, I will try a rig on Ezil. Do you have a logfile I can look at for more information?

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

I tried your miner,I mean your last 1.31 version and it keeps getting kicked out of the pool ezil.me after a certain amount,it did so 2 times in an hour.I quit for the moment and got back to another miner but what could be the problem as even the reported hash rate was much higher than mine,I have about 290 Mhsh and it showed 425 Mhsh in the pool.At least the stale shares problem is fixed but another one popped up,this one that I just described.

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

v1.31
1. Fixed bug in stratumcode for nicehash and the hiveon pool and possibly other pools as well.
2. Added support for NVIDIA compute 6.0, 7.0, 8.0 cards GV100 , V100 , GA100
3. Fixed XINT,KERN, hashrate and hashrate/w in the stats when running with a selection of gpus in the rig.

https://github.com/sp-hash/TeamBlackMiner/releases/

TeamBlackMiner_1_31_cuda_11_5.7z
https://www.virustotal.com/gui/file/1962b8a9e647c52f44f6ccbcb1c44338f45e65fd673b6d16c4302164392cf0ee?nocache=1

TeamBlackMiner_1_31_cuda_11_4.7z
https://www.virustotal.com/gui/file/68e09c20600091a7b6aaf5883bd0a5cba581caa012a840e711993c773dbe8230?nocache=1

TeamBlackMiner_1_31_cuda_11_2.7z
https://www.virustotal.com/gui/file/7b020400aff7b051d382ab3251a0ceb04f5eb8f2b25666c0384b2d6efcc4310f?nocache=1

TeamBlackMiner_1_31_Ubuntu_18_04_Cuda_11_5.tar.gz
https://www.virustotal.com/gui/file/11be3e27df5ed18568b8cca37dc68e0c766f6a08cfc998959dd25e7f52449f9e?nocache=1

TeamBlackMiner_1_31_Ubuntu_18_04_Cuda_11_4.tar.gz
https://www.virustotal.com/gui/file/a8dca50673e5f7d9cb0df784d906d2531d3bf7d1c03123eba392d0c3e0717162?nocache=1

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: sxemini on December 06, 2021, 05:56:05 AM

I get 34,4 mh on my 6600xt. After 24h no reject share on rustpool and ethermine.
But ETC+Zil will not work for me. Cannot subscribe to the pool.

I have created a ticked for this. We will look into it.

https://github.com/sp-hash/TeamBlackMiner/issues/179

Quote from: Dojo76 on December 06, 2021, 05:36:07 AM

Upgrade to v1.30. I got less than 0.5% rejects in my test.

I upgraded yesterday, in about 12h only 11 rejected shares (0,22%). Wonderful job, you're very close to perfection in Hiveon pool, huge improvement. I noticed that all the rejected are basically in the first minutes after miner is started, then almost no rejected ones until is restarted, it seems like pool and miner needs some minutes to adjust

Did a small change and now I get 0 rejects on the hiveon pool. Will let it run for a while.

edit: 0% rejects and 0% stale in the LHR card testrig on the hiveon pool..

Small changes to the stratum code can break compatibility with other pools, so we need more testing.

sxemini

member

Activity: 1558

Merit: 69

I get 34,4 mh on my 6600xt. After 24h no reject share on rustpool and ethermine.

But ETC+Zil will not work for me. Cannot subscribe to the pool.

Dojo76

newbie

Activity: 30

Merit: 0

Quote from: sp_ on December 05, 2021, 11:26:37 AM

v1.30 final version is ready..

Upgrade to v1.30. I got less than 0.5% rejects in my test.

I upgraded yesterday, in about 12h only 11 rejected shares (0,22%). Wonderful job, you're very close to perfection in Hiveon pool, huge improvement. I noticed that all the rejected are basically in the first minutes after miner is started, then almost no rejected ones until is restarted, it seems like pool and miner needs some minutes to adjust

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: Zels on December 05, 2021, 07:55:02 PM

V1.29 working fine here, 1.30 fail Cry

thanks for reporting. We will fix it

https://github.com/sp-hash/TeamBlackMiner/issues/178
https://github.com/sp-hash/TeamBlackMiner/issues/177

Zels

full member

Activity: 203

Merit: 100

Result on latest release here:

Nicehash: Lot of reject, share above target after 4 - 5min running

prohashing, incorrect algo Huh

V1.29 working fine here, 1.30 fail Cry

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: ?? on ??

sp_ , is it possible to set Extranonce manually for eth?

no

linux build with no cpu added:

https://github.com/sp-hash/TeamBlackMiner/releases

wasarianta

newbie

Activity: 40

Merit: 0

Quote from: dle378 on December 05, 2021, 10:28:07 AM

Quote from: wasarianta on December 05, 2021, 05:05:40 AM

Quote from: ?? on ??

Quote from: dle378 on December 04, 2021, 09:41:01 PM

Have you tried any other xintensity values for MPH that worked best for your setup?

yes. --xintensity 4096 move the rig up to 115 (+5) mhash and poolside 113 ish.

on 1.30 and nvidia 497.09 windows 10
let's try --xintensity [5120] --tweak [7] --kernel [6] on 2miners running at P0 = ON and the latest final MSI AB (i find memclock improve from +1200 (MSI beta version) to +1500 (MSI final version)).

https://ibb.co/DkzmZ9R

Have you tried these settings on MiningPoolHub?

no... sorry even the closest host asia.ethash-hub.miningpoolhub.com for me have 130+ ms ping and the diff is higher than 2miners.

sp_ , is it possible to set Extranonce manually for eth?

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

But the new version have increased cpu usage for cuda.

building a new version

edit: windows complete

Dojo76

newbie

Activity: 30

Merit: 0

Quote from: sp_ on December 05, 2021, 06:56:07 AM

Quote from: Dojo76 on December 05, 2021, 06:15:23 AM

@sp_ can you recommand more stable setting to avoid rejected shares? With 1.29 are reduced but still not perfect (about 1%)

Found a possible fix. Testing now..

edit: 30mins without a rejected share now. 85/85

Sounds great! I noticed RX 6800 XT is more prone to rejected shares than other AMD 6000 series GPUs despite running very stable, looking forward to test the new version

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

v1.30 final version is ready..

v1.30
1. NVIDIA partial LHR unlock for all drivers and models. Enabled with (--lhr-unlock)
2. Removed vardiff in the display when pool has static diff.
3. Reduced memory usage.
4. Added support for more pools.
5. Improved maintenance fee code, fully integrated.
6. Improved the statum code. More compatible less rejected shares.

https://github.com/sp-hash/TeamBlackMiner/releases/

TeamBlackMiner_1_30_cuda_11_2_cpufix.7z
https://www.virustotal.com/gui/file/c6e1cf764d50105ff388a6a3f1857a7da98cabe9400aacf17d8d4f9ba02989d4?nocache=1

TeamBlackMiner_1_30_cuda_11_4_cpufix.7z
https://www.virustotal.com/gui/file/30366c6cf49fd421a6975c91e452e8283e39a8392baa42f4596182a4a061beec?nocache=1

TeamBlackMiner_1_30_cuda_11_5_cpufix.7z
https://www.virustotal.com/gui/file/ee774f04c36c31a6a3cf04e797cb098f1bb9db15c88c8715bed282fd839f6945?nocache=1

TeamBlackMiner_1_30_Ubuntu_18_04_Cuda_11_5_cpufix.zip
https://www.virustotal.com/gui/file/884cd1ae8aa82dbfe3aa8d8476f3ae777d406916c682dec52590229a9298ad06?nocache=1

TeamBlackMiner_1_30_Ubuntu_18_04_Cuda_11_4_cpufix.tar.gz
https://www.virustotal.com/gui/file/185d8b3e42aafd4bd613e0a6b0d74122b1a26b118b120c0ccb2f9882bba2bfc0?nocache=1

Quote from: Dojo76 on December 05, 2021, 06:15:23 AM

@sp_ can you recommand more stable setting to avoid rejected shares? With 1.29 are reduced but still not perfect (about 1%)

Upgrade to v1.30. I got less than 0.5% rejects in my test.

dle378

copper member

Activity: 77

Merit: 0

Quote from: wasarianta on December 05, 2021, 05:05:40 AM

Quote from: ?? on ??

Quote from: dle378 on December 04, 2021, 09:41:01 PM

Have you tried any other xintensity values for MPH that worked best for your setup?

yes. --xintensity 4096 move the rig up to 115 (+5) mhash and poolside 113 ish.

on 1.30 and nvidia 497.09 windows 10
let's try --xintensity [5120] --tweak [7] --kernel [6] on 2miners running at P0 = ON and the latest final MSI AB (i find memclock improve from +1200 (MSI beta version) to +1500 (MSI final version)).

https://ibb.co/DkzmZ9R

Have you tried these settings on MiningPoolHub?

Topic: Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 43. (Read 35053 times)