Hi,
Since the board gets really hot in the summer I decided to change the fans - the original ones were:
Evercool EC9225M12SA
Dimensions: 92x92x25 mm
Power: 1.8 W
Speed: 2200 rpm
Air Flow: 40.9 CFM
Noise: 25 dB
The information on OP was wrong - sorry about that
I've changed the top fan with:
Evercool EC9225HH12BA
Dimensions: 92x92x25 mm
Power: 3.24 W
Speed: 3000 rpm
Air Flow: 61.51 CFM
Noise: 35 dB
..and the bottom with a spare from HEX16B:
Sunon EE92251S1-0000-A99
Dimensions: 92x92x25 mm
Power: 2.0 W
Speed: 3000 rpm
Air Flow: 51.5 CFM
Noise: 34 dB
How it's running cool at 260/980 => ~130GH
btw I've updated the price chart you can see it here:
Updated Price Chart[/i]
Topic: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed (Read 7460 times)
sudo su didnt help
Sorry dude......finally if you can enable ssh and give me remote access i can try to help youi have run in to a new problem. the miner is visible and if i pull out the usb a message appears on the screen wich is good news.
i will send you a pm pretty soon so you can ssh it if you feel like it..
No submissions
Type " top " & post the screen shot.
No submissions
Quote
cgminer version 4.2.2 - Started: [2014-04-10 09:52:26]
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool managementettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool management
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
As HellDiverUK said, there is other cgminer run in your host, maybe you just not know how to see it.
I test this already & the message is same.
Check your pool, your worker must be submitting share this whole time LOL.
maybe some other time....
Good luck dude
maybe some other time....
sudo su didnt help
Sorry dude......finally if you can enable ssh and give me remote access i can try to help you
sudo su didnt help
i did that to start with. i mentioned that i have two linux installed when i asked where i could find somebody who knows how i could copy wallet and data files from the terminal... remember?
You are loosing too much time dude fighting with linuxNo hard feelings but try to find a tplink asap or try hexminer Microsoft s...t
Unfortunately i will not be able to give you hints with M$ but other folks will for sure
Good luck
Finally
type sudo su
And try all over again
i did that to start with. i mentioned that i have two linux installed when i asked where i could find somebody who knows how i could copy wallet and data files from the terminal... remember?
i dont think i can find tplink in a store near where i live. a new raspberry pi should work so installing os and miner shouldnt be a problem.
Then in mean time try to reinstall the linux
i dont think i can find tplink in a store near where i live. a new raspberry pi should work so installing os and miner shouldnt be a problem.
its just that with shipping costs you almost pay twice the value for the product.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
You can buy tplink from local store behind the corner much more chipper than Pi. And flash iti thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
Tplink can handle a lot even though it seems less powerful compared to PI
Let say 10 HEx8 - 2.1T in total without issues - personal experience.
So do not worry
And with Rpi you still need to install the OS, then compile the cgminer.
With TPLINK you only need to flash with latest firmware from technobit & ready to go.
its just that with shipping costs you almost pay twice the value for the product.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
You can buy tplink from local store behind the corner much more chipper than Pi. And flash iti thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
Tplink can handle a lot even though it seems less powerful compared to PI
Let say 9 (My bad) HEx8 - 2.1T in total without issues - personal experience.
So do not worry
I am too lasy for screen shots
cgminer version 4.2.3 - Started: [2014-04-07 14:06:04]
--------------------------------------------------------------------------------
(5s):548.0G (1m):2.100T (5m):2.100T (15m):2.041T (avg):2.100Th/s
A:170947100 R:487226 HW:1600021 WU:29340.5/m
Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as user
Block: 1bbf4d6f... Diff:6.12G Started: [15:26:31] Best share: 239M
--------------------------------------------------------------------------------
SB management [P]ool management
0: HEX8 0 : 230 860/ 863mV | 9.443G / 233.8Gh/s WU:3266.8/m
1: HEX8 1 : 230 860/ 859mV | 516.1G / 231.2Gh/s WU:3229.3/m
2: HEX8 2 : 230 860/ 871mV | 71.73G / 235.6Gh/s WU:3291.3/m
3: HEX8 3 : 230 860/ 860mV | 15.02G / 235.2Gh/s WU:3285.1/m
4: HEX8 4 : 230 860/ 870mV | 46.55G / 227.4Gh/s WU:3176.5/m
5: HEX8 5 : 230 860/ 864mV | 77.03G / 233.8Gh/s WU:3266.6/m
6: HEX8 6 : 230 860/ 858mV | 1.679T / 234.5Gh/s WU:3275.6/m
7: HEX8 7 : 230 860/ 859mV | 105.8G / 235.5Gh/s WU:3289.9/m
8: HEX8 8 : 230 860/ 862mV | 8.153G / 233.3Gh/s WU:3259.3/m
--------------------------------------------------------------------------------
[detached]
root@HEX16A:~# uptime
15:30:56 up 4 days, 1:25, load average: 1.23, 1.63, 1.71
its just that with shipping costs you almost pay twice the value for the product.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
I guess your linux system already contaminated. Times to move on & buy TPLINK TL-MR3020 
+1 and forget about suffering Or type sudo su
and try again
But as Zich said just go for a tplink
I guess your linux system already contaminated. Times to move on & buy TPLINK TL-MR3020
tmp dont exist. can not create newfolder. cgminer folder may be write protectet.
Code:
b@b-Lenovo-Ideapad-S12:~/cgminer-4.2.2$ sudo rm tmp/cgminer-usb-3-7
[sudo] password for b:
rm: cannot remove ‘tmp/cgminer-usb-3-7’: No such file or directory
b@b-Lenovo-Ideapad-S12:~/cgminer-4.2.2$ lsmod
Module Size Used by
binfmt_misc 17260 1
cdc_acm 22338 0
parport_pc 27504 0
ppdev 12817 0
snd_hda_codec_hdmi 36143 1
bnep 17736 2
rfcomm 37420 0
bluetooth 202266 10 bnep,rfcomm
snd_hda_codec_realtek 63829 1
coretemp 13131 0
joydev 17097 0
nouveau 843003 3
lib80211_crypt_tkip 17229 0
acer_wmi 27592 0
mxm_wmi 12893 1 nouveau
wl 2906469 0
ttm 75385 1 nouveau
drm_kms_helper 47545 1 nouveau
snd_hda_intel 38307 3
snd_hda_codec 117617 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
drm 228489 5 ttm,drm_kms_helper,nouveau
snd_hwdep 13272 1 snd_hda_codec
i2c_algo_bit 13197 1 nouveau
microcode 18286 0
snd_pcm 80890 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
lib80211 14040 2 wl,lib80211_crypt_tkip
uvcvideo 71279 0
cfg80211 440887 1 wl
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
videobuf2_vmalloc 12920 1 uvcvideo
snd_seq_midi 13132 0
psmouse 81065 0
shpchp 32129 0
snd_seq_midi_event 14475 1 snd_seq_midi
serio_raw 13031 0
videobuf2_memops 13042 1 videobuf2_vmalloc
snd_rawmidi 25114 1 snd_seq_midi
videobuf2_core 39161 1 uvcvideo
ideapad_laptop 18018 0
videodev 95806 2 uvcvideo,videobuf2_core
sparse_keymap 13658 2 acer_wmi,ideapad_laptop
snd_seq 51280 2 snd_seq_midi_event,snd_seq_midi
video 18894 2 acer_wmi,nouveau
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 24411 2 snd_pcm,snd_seq
snd 56485 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 12600 1 snd
wmi 18590 3 acer_wmi,mxm_wmi,nouveau
mac_hid 13037 0
1. Make sure that /tmp folder exists -
2. do sudo rm tmp/cgminer-usb-3-7
3. run cgminer with SUDO as advised
Please post the output of lsmod
2. do sudo rm tmp/cgminer-usb-3-7
3. run cgminer with SUDO as advised
Please post the output of lsmod
agement [P]ool management ettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
[2014-04-11 12:48:48] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
[2014-04-11 12:48:48] USB scan devices: checking for HEX8 devices
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 5986:0241 instead
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
[2014-04-11 12:48:49] HEX8 looking for and found HEX8 04d8:000a
[2014-04-11 12:48:49] USB lock hexminer8 3-7
[2014-04-11 12:48:49] RES: hexminer8 (3:7) lock=1
[2014-04-11 12:48:49] USB res lock hexminer8 3-7
[2014-04-11 12:48:49] hexminer8 USB failed to get '/tmp/cgminer-usb-3-7' - device in use
[2014-04-11 12:48:49] RES: hexminer8 (3:7) lock ok=0
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 12:48:49] Discarded work
[2014-04-11 12:48:49] Selecting pool 0 for work
[2014-04-11 12:48:49] Generated stratum merkle 145b1c5d9dcfd979287f257ce325bfd2f9f3affa5e80e1a72932a6722b402a5b
[2014-04-11 12:48:49] Generated stratum header 00000002bf320ad710d80389eaad8310431dea5172bf4ea8792ac64300002f4900000000145b1c5 d9dcfd9
79287f257ce325bfd2f9f3affa5e80e1a72932a6722b402a5b5347c8831b0122880000000000000 0800000000000000000000000000000000000000000000000000000
0000
[2014-04-11 12:48:49] Work job_id ea70 nonce2 6 ntime 5347c883
[2014-04-11 12:48:49] Generated target 00000000000000000000000000000000000000000000000000e0ff1f00000000
[2014-04-11 12:48:49] Generated stratum work
[2014-04-11 12:48:49] Pushing work from pool 0 to hash queue
[2014-04-11 12:48:51] Discarded work
[2014-04-11 12:48:51] Selecting pool 0 for work
[2014-04-11 12:48:51] Generated stratum merkle 218fa8bcba107ce7996911463491ff5d94e83de16b9a3309263d93bb759491f9
[2014-04-11 12:48:51] Generated stratum header 00000002bf320ad710d80389eaad8310431dea5172bf4ea8792ac64300002f4900000000218fa8b cba107c
e7996911463491ff5d94e83de16b9a3309263d93bb759491f95347c8831b0122880000000000000 0800000000000000000000000000000000000000000000000000000
0000
[2014-04-11 12:48:51] Work job_id ea70 nonce2 7 ntime 5347c883
[2014-04-11 12:48:51] Generated target 000000000000000000000000000
--------------------------------------------------------------------------------
[2014-04-11 12:48:48] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
[2014-04-11 12:48:48] USB scan devices: checking for HEX8 devices
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 5986:0241 instead
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
[2014-04-11 12:48:49] HEX8 looking for and found HEX8 04d8:000a
[2014-04-11 12:48:49] USB lock hexminer8 3-7
[2014-04-11 12:48:49] RES: hexminer8 (3:7) lock=1
[2014-04-11 12:48:49] USB res lock hexminer8 3-7
[2014-04-11 12:48:49] hexminer8 USB failed to get '/tmp/cgminer-usb-3-7' - device in use
[2014-04-11 12:48:49] RES: hexminer8 (3:7) lock ok=0
[2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 12:48:49] Discarded work
[2014-04-11 12:48:49] Selecting pool 0 for work
[2014-04-11 12:48:49] Generated stratum merkle 145b1c5d9dcfd979287f257ce325bfd2f9f3affa5e80e1a72932a6722b402a5b
[2014-04-11 12:48:49] Generated stratum header 00000002bf320ad710d80389eaad8310431dea5172bf4ea8792ac64300002f4900000000145b1c5 d9dcfd9
79287f257ce325bfd2f9f3affa5e80e1a72932a6722b402a5b5347c8831b0122880000000000000 0800000000000000000000000000000000000000000000000000000
0000
[2014-04-11 12:48:49] Work job_id ea70 nonce2 6 ntime 5347c883
[2014-04-11 12:48:49] Generated target 00000000000000000000000000000000000000000000000000e0ff1f00000000
[2014-04-11 12:48:49] Generated stratum work
[2014-04-11 12:48:49] Pushing work from pool 0 to hash queue
[2014-04-11 12:48:51] Discarded work
[2014-04-11 12:48:51] Selecting pool 0 for work
[2014-04-11 12:48:51] Generated stratum merkle 218fa8bcba107ce7996911463491ff5d94e83de16b9a3309263d93bb759491f9
[2014-04-11 12:48:51] Generated stratum header 00000002bf320ad710d80389eaad8310431dea5172bf4ea8792ac64300002f4900000000218fa8b cba107c
e7996911463491ff5d94e83de16b9a3309263d93bb759491f95347c8831b0122880000000000000 0800000000000000000000000000000000000000000000000000000
0000
[2014-04-11 12:48:51] Work job_id ea70 nonce2 7 ntime 5347c883
[2014-04-11 12:48:51] Generated target 000000000000000000000000000
when inserting into another port the device number changes. its still bus 3.
yes
Can you run it with debugging enabled?Code:
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 007: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Quote
shortpocket,
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?
yes
just type
./cgminer -D
you should see something like
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0002 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0002 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] USB scan devices: checking for HEXc devices
[2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0002 instead
[2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] USB scan devices: checking for HEX8 devices
[2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
[2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] USB scan devices: checking for HEX3 devices
[2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0002 instead
[2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
[2014-04-11 13:24:30] USB scan devices: checking for HEXu devices
[2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0002 instead
[2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead
[2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead
And post back your result
10X
when inserting into another port the device number changes. its still bus 3.
yes
Code:
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 007: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Quote
shortpocket,
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?
yes
Quote
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo, this is your miner.
But it's located on usb 1 root. Try to moved it to usb 2 root.
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?
Quote
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo, this is your miner.
But it's located on usb 1 root. Try to moved it to usb 2 root.
Quote
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Code:
SECAM - 625/50
NTSC - 625/50
VideoControl Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 6
guidExtensionCode {564c97a7-7ea7-904b-8cbf-1c71ec303000}
bNumControl 16
bNrPins 1
baSourceID( 0) 5
bControlSize 2
bmControls( 0) 0xff
bmControls( 1) 0xff
iExtension 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
VideoStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 1
wTotalLength 261
bEndPointAddress 129
bmInfo 0
bTerminalLink 3
bStillCaptureMethod 0
bTriggerSupport 0
bTriggerUsage 0
bControlSize 1
bmaControls( 0) 27
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 1
bNumFrameDescriptors 6
guidFormat {59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 2 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 12288000
dwMaxBitRate 12288000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 555555
bFrameIntervalType 3
dwFrameInterval( 0) 555555
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 3072000
dwMaxBitRate 3072000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 555555
bFrameIntervalType 3
dwFrameInterval( 0) 555555
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 768000
dwMaxBitRate 768000
dwMaxVideoFrameBufferSize 38400
dwDefaultFrameInterval 555555
bFrameIntervalType 3
dwFrameInterval( 0) 555555
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 4055040
dwMaxBitRate 4055040
dwMaxVideoFrameBufferSize 202752
dwDefaultFrameInterval 555555
bFrameIntervalType 3
dwFrameInterval( 0) 555555
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 1013760
dwMaxBitRate 1013760
dwMaxVideoFrameBufferSize 50688
dwDefaultFrameInterval 555555
bFrameIntervalType 3
dwFrameInterval( 0) 555555
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 30
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 6
bmCapabilities 0x00
Still image unsupported
wWidth 1280
wHeight 1024
dwMinBitRate 26214400
dwMaxBitRate 26214400
dwMaxVideoFrameBufferSize 2621440
dwDefaultFrameInterval 1000000
bFrameIntervalType 1
dwFrameInterval( 0) 1000000
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04d8 Microchip Technology, Inc.
idProduct 0x000a CDC RS-232 Emulation Demo
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.08
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.08
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.08
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.08
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
[code]
[ 1.152132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.152142] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.152150] usb usb1: Product: EHCI Host Controller
[ 1.152158] usb usb1: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[ 1.152166] usb usb1: SerialNumber: 0000:00:04.1
[ 1.152522] hub 1-0:1.0: USB hub found
[ 1.152539] hub 1-0:1.0: 6 ports detected
[ 1.153267] ehci-pci 0000:00:06.1: setting latency timer to 64
[ 1.153278] ehci-pci 0000:00:06.1: EHCI Host Controller
[ 1.153296] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 1.153318] ehci-pci 0000:00:06.1: debug port 1
[ 1.153362] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[ 1.153408] ehci-pci 0000:00:06.1: irq 19, io mem 0xc0007400
[ 1.164058] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 1.164125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.164134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.164142] usb usb2: Product: EHCI Host Controller
[ 1.164150] usb usb2: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[ 1.164157] usb usb2: SerialNumber: 0000:00:06.1
[ 1.164631] hub 2-0:1.0: USB hub found
[ 1.164647] hub 2-0:1.0: 6 ports detected
[ 1.165304] ehci-platform: EHCI generic platform driver
[ 1.165345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.165439] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.165449] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.165467] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.165535] ohci_hcd 0000:00:04.0: irq 22, io mem 0xc0006000
[ 1.222112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.222122] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.222131] usb usb3: Product: OHCI Host Controller
[ 1.222139] usb usb3: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[ 1.222146] usb usb3: SerialNumber: 0000:00:04.0
[ 1.222568] hub 3-0:1.0: USB hub found
[ 1.222586] hub 3-0:1.0: 6 ports detected
[ 1.222960] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.222970] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.222987] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.223048] ohci_hcd 0000:00:06.0: irq 20, io mem 0xc0008000
[ 1.242612] ACPI: EC: GPE storm detected(9 GPEs), transactions will use polling mode
[ 1.278076] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.278086] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.278094] usb usb4: Product: OHCI Host Controller
[ 1.278102] usb usb4: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[ 1.278109] usb usb4: SerialNumber: 0000:00:06.0
[ 1.278448] hub 4-0:1.0: USB hub found
[ 1.278464] hub 4-0:1.0: 6 ports detected
[ 1.278940] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.279234] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.290933] i8042: Detected active multiplexing controller, rev 1.1
[ 1.298233] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.298254] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.298367] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.298446] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.298532] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.298914] mousedev: PS/2 mouse device common for all mice
[ 1.299446] rtc_cmos 00:07: RTC can wake from S4
[ 1.299792] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.299860] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.300219] device-mapper: uevent: version 1.0.3
[ 1.300419] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
[ 1.300481] EISA: Probing bus 0 at eisa.0
[ 1.300490] EISA: Cannot allocate resource for mainboard
[ 1.300498] Cannot allocate resource for EISA slot 1
[ 1.300505] Cannot allocate resource for EISA slot 2
[ 1.300512] Cannot allocate resource for EISA slot 3
[ 1.300519] Cannot allocate resource for EISA slot 4
[ 1.300526] Cannot allocate resource for EISA slot 5
[ 1.300533] Cannot allocate resource for EISA slot 6
[ 1.300540] Cannot allocate resource for EISA slot 7
[ 1.300546] Cannot allocate resource for EISA slot 8
[ 1.300552] EISA: Detected 0 cards.
[ 1.300575] cpufreq-nforce2: No nForce2 chipset.
[ 1.300700] cpuidle: using governor ladder
[ 1.300857] cpuidle: using governor menu
[ 1.300866] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.300872] EFI Variables Facility v0.08 2004-May-17
[ 1.301473] ashmem: initialized
[ 1.301851] TCP: cubic registered
[ 1.302254] NET: Registered protocol family 10
[ 1.302787] NET: Registered protocol family 17
[ 1.302820] Key type dns_resolver registered
[ 1.303302] Using IPI No-Shortcut mode
[ 1.303569] Loading module verification certificates
[ 1.318302] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: bab43694c655e6aee9fceadd34ffb05cf4363bc5'
[ 1.318338] registered taskstats version 1
[ 1.326558] Key type trusted registered
[ 1.332450] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.334873] Key type encrypted registered
[ 1.343528] rtc_cmos 00:07: setting system clock to 2014-04-10 05:13:46 UTC (1397106826)
[ 1.344657] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.344664] EDD information not available.
[ 1.455509] isapnp: No Plug & Play device found
[ 1.464059] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 1.834504] usb 1-4: New USB device found, idVendor=5986, idProduct=0241
[ 1.834522] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 1.834536] usb 1-4: Product: Lenovo EasyCamera
[ 1.834547] usb 1-4: Manufacturer: BISON Corporation
[ 1.928455] ACPI: Battery Slot [BAT0] (battery present)
[ 1.928666] Freeing unused kernel memory: 792k freed
[ 1.929305] Write protecting the kernel text: 6264k
[ 1.929446] Write protecting the kernel read-only data: 2484k
[ 1.929452] NX-protecting the kernel data: 3976k
[ 1.964926] udevd[97]: starting version 175
[ 2.361799] Disabling lock debugging due to kernel taint
[ 2.363936] ahci 0000:00:0b.0: version 3.0
[ 2.371809] pps_core: LinuxPPS API ver. 1 registered
[ 2.371820] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 2.379314] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[ 2.379462] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 2.379506] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 2.379662] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.379675] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part
[ 2.379687] ahci 0000:00:0b.0: setting latency timer to 64
[ 2.407817] scsi0 : ahci
[ 2.412710] scsi1 : ahci
[ 2.416163] scsi2 : ahci
[ 2.417799] PTP clock support registered
[ 2.420134] scsi3 : ahci
[ 2.442019] scsi4 : ahci
[ 2.445675] scsi5 : ahci
[ 2.445991] ata1: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 40
[ 2.446001] ata2: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 40
[ 2.446008] ata3: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004200 irq 40
[ 2.446016] ata4: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004280 irq 40
[ 2.446024] ata5: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004300 irq 40
[ 2.446031] ata6: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004380 irq 40
[ 2.460413] tg3.c:v3.128 (December 03, 2012)
[ 2.504231] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1f:16:35:6a:02
[ 2.504247] tg3 0000:06:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[ 2.504257] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.504267] tg3 0000:06:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.776108] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.776183] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.776213] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.777135] ata1.00: ATA-8: HITACHI HTS545032B9A300, PB3ZC61H, max UDMA/100
[ 2.777150] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.778271] ata1.00: configured for UDMA/100
[ 2.778723] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54503 PB3Z PQ: 0 ANSI: 5
[ 2.779418] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.779474] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.779672] sd 0:0:0:0: [sda] Write Protect is off
[ 2.779683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.779816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.780084] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.780129] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.780157] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.819793] sda: sda1 sda2 < sda5 sda6 >
[ 2.821119] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.624403] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 4.624415] EXT4-fs (sda6): write access will be enabled during recovery
[ 5.693849] EXT4-fs (sda6): recovery complete
[ 5.704956] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 16.541243] Adding 1832956k swap on /dev/sda5. Priority:-1 extents:1 across:1832956k
[ 16.668387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.792298] udevd[389]: starting version 175
[ 17.395892] lp: driver loaded but no devices found
[ 17.402056] ACPI Warning: 0x00003040-0x0000307f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20121018/utaddress-251)
[ 17.402079] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.402090] ACPI Warning: 0x00002000-0x0000203f SystemIO conflicts with Region \_SB_.PCI0.SM01 1 (20121018/utaddress-251)
[ 17.402105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.660157] wmi: Mapper loaded
[ 18.154490] Linux video capture interface: v2.00
[ 18.240431] acpi device:0f: registered as cooling_device2
[ 18.240858] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 18.241048] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0e/LNXVIDEO:00/input/input5
[ 18.245881] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
[ 18.335201] type=1400 audit(1397106843.485:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=620 comm="apparmor_parser"
[ 18.336798] type=1400 audit(1397106843.489:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=620 comm="apparmor_parser"
[ 18.337635] type=1400 audit(1397106843.489:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=620 comm="apparmor_parser"
[ 18.345680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.525695] cfg80211: Calling CRDA to update world regulatory domain
[ 18.568556] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[ 18.574803] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input7
[ 18.575344] usbcore: registered new interface driver uvcvideo
[ 18.575355] USB Video Class driver (1.1.1)
[ 18.621782] lib80211: common routines for IEEE802.11 drivers
[ 18.621794] lib80211_crypt: registered algorithm 'NULL'
[ 18.696805] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
[ 18.729613] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 19.054347] [drm] Initialized drm 1.1.0 20060810
[ 19.144149] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 19.144198] hda_intel: Disabling MSI
[ 19.144314] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 19.412864] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000/0x0, board id: 3655, fw id: 437347
[ 19.457002] wl: module license 'MIXED/Proprietary' taints kernel.
[ 19.470839] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 19.610863] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[ 19.617150] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 19.630619] acer_wmi: Brightness must be controlled by acpi video driver
[ 19.631727] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[ 19.727360] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 19.842979] lib80211_crypt: registered algorithm 'TKIP'
[ 19.904264] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 19.927622] cfg80211: World regulatory domain updated:
[ 19.927633] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.927641] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.927647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.927653] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.927660] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.927666] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.945029] nouveau 0000:05:00.0: setting latency timer to 64
[ 19.945627] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
[ 19.948847] nouveau [ DEVICE][0000:05:00.0] BOOT0 : 0x0acb00b1
[ 19.948860] nouveau [ DEVICE][0000:05:00.0] Chipset: MCP79/MCP7A (NVAC)
[ 19.948868] nouveau [ DEVICE][0000:05:00.0] Family : NV50
[ 19.952069] nouveau [ VBIOS][0000:05:00.0] checking PRAMIN for image...
[ 20.072256] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264)
[ 20.094012] nouveau [ VBIOS][0000:05:00.0] ... appears to be valid
[ 20.094027] nouveau [ VBIOS][0000:05:00.0] using image from PRAMIN
[ 20.094661] nouveau [ VBIOS][0000:05:00.0] BIT signature found
[ 20.094677] nouveau [ VBIOS][0000:05:00.0] version 62.79.62.00.00
[ 20.184100] nouveau [ PFB][0000:05:00.0] RAM type: stolen system memory
[ 20.184114] nouveau [ PFB][0000:05:00.0] RAM size: 256 MiB
[ 20.184124] nouveau [ PFB][0000:05:00.0] ZCOMP: 0 tags
[ 20.262970] init: failsafe main process (815) killed by TERM signal
[ 20.325608] [TTM] Zone kernel: Available graphics memory: 441914 kiB
[ 20.325618] [TTM] Zone highmem: Available graphics memory: 902078 kiB
[ 20.325624] [TTM] Initializing pool allocator
[ 20.325641] [TTM] Initializing DMA pool allocator
[ 20.325911] nouveau [ DRM] VRAM: 256 MiB
[ 20.325922] nouveau [ DRM] GART: 512 MiB
[ 20.325934] nouveau [ DRM] BIT BIOS found
[ 20.325944] nouveau [ DRM] Bios version 62.79.62.00
[ 20.325954] nouveau [ DRM] TMDS table version 2.0
[ 20.325960] nouveau [ DRM] DCB version 4.0
[ 20.325967] nouveau [ DRM] DCB outp 00: 01000323 00010034
[ 20.325974] nouveau [ DRM] DCB outp 01: 02011300 0000001e
[ 20.325980] nouveau [ DRM] DCB outp 02: 02022332 00020010
[ 20.325986] nouveau [ DRM] DCB conn 00: 00000040
[ 20.325993] nouveau [ DRM] DCB conn 01: 00000100
[ 20.325999] nouveau [ DRM] DCB conn 02: 00001261
[ 20.349464] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.349474] [drm] No driver support for vblank timestamp query.
[ 20.349485] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 21.362870] Bluetooth: Core ver 2.16
[ 21.372393] NET: Registered protocol family 31
[ 21.372403] Bluetooth: HCI device and connection manager initialized
[ 21.373692] Bluetooth: HCI socket layer initialized
[ 21.373707] Bluetooth: L2CAP socket layer initialized
[ 21.373737] Bluetooth: SCO socket layer initialized
[ 21.535481] nouveau [ DRM] 4 available performance level(s)
[ 21.535501] nouveau [ DRM] 0: core 200MHz shader 400MHz voltage 900mV fanspeed 60%
[ 21.535514] nouveau [ DRM] 1: core 300MHz shader 600MHz voltage 900mV fanspeed 100%
[ 21.535527] nouveau [ DRM] 2: core 350MHz shader 800MHz voltage 900mV fanspeed 100%
[ 21.535540] nouveau [ DRM] 3: core 450MHz shader 1100MHz voltage 1010mV fanspeed 100%
[ 21.535547] nouveau [ DRM] c:
[ 21.580039] nouveau [ DRM] MM: using M2MF for buffer copies
[ 21.608111] Bluetooth: RFCOMM TTY layer initialized
[ 21.608143] Bluetooth: RFCOMM socket layer initialized
[ 21.608150] Bluetooth: RFCOMM ver 1.11
[ 21.631006] nouveau [ DRM] allocated 1280x800 fb: 0x50000, bo f35b3e00
[ 21.637406] fbcon: nouveaufb (fb0) is primary device
[ 21.686898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.686901] Bluetooth: BNEP filters: protocol multicast
[ 21.686922] Bluetooth: BNEP socket layer initialized
[ 21.926780] Console: switching to colour frame buffer device 160x50
[ 21.927880] nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device
[ 21.927889] nouveau 0000:05:00.0: registered panic notifier
[ 21.927907] [drm] Initialized nouveau 1.1.0 20120801 for 0000:05:00.0 on minor 0
[ 22.209593] type=1400 audit(1397106847.361:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=940 comm="apparmor_parser"
[ 22.210834] type=1400 audit(1397106847.361:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=940 comm=&
type following command on terminal:
Post each output from that command.
Code:
lsusb
Code:
lsusb -v
Code:
dmesg
Post each output from that command.
Quote
lsusb output?
+ lsusb -v
+ dmesg
+ lsusb -v
+ dmesg
further explanation?
Quote
have you tried with other usb cable?
the hex have been available during preveous install. cant remember wich version.
Have been patched.
No other instance is running.
lsusb output?No other instance is running.
+ lsusb -v
+ dmesg
have you tried with other usb cable?
Have been patched.
No other instance is running.
No other instance is running.
API filing to bind makes me think there's another instance of cgminer already running that's got hold of the USB miners.
Quote
cgminer version 4.2.2 - Started: [2014-04-10 09:52:26]
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool managementettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool management
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
Quote
cgminer version 4.2.2 - Started: [2014-04-10 09:52:26]
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool managementettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool management
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
i tried to delete it by right-clicking and move to trash since i dont know that many commands
sudo rm -rf /home/b/.cgminer/cgminer.conf
i tried to delete it by right-clicking and move to trash since i dont know that many commands
sudo ./cgminer?
i did that.
i did that.
i mean add sudo when deleting conf file. You don't need to delete cgminer folder since conf located in other location.
sudo ./cgminer?
i did that.
i did that.
i removed the cgminer-4.2.2 folder and started all over with this
then i started up cgminer ....
(now there is 2 cgminer.conf files one with "pool" on the image and one with "..." and i can not delete any of them)
then i started up cgminer ....
(now there is 2 cgminer.conf files one with "pool" on the image and one with "..." and i can not delete any of them)
Quote
[2014-04-10 08:59:39] Started cgminer 4.2.2
[2014-04-10 08:59:39] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 08:59:40] No devices detected!
[2014-04-10 08:59:40] Waiting for USB hotplug devices or press q to quit
[2014-04-10 08:59:40] Probing for an alive pool
[2014-04-10 08:59:40] Pool 0 difficulty changed to 8
[2014-04-10 08:59:41] Network diff set to 73.4K
[2014-04-10 08:59:46] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 08:59:39] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 08:59:40] No devices detected!
[2014-04-10 08:59:40] Waiting for USB hotplug devices or press q to quit
[2014-04-10 08:59:40] Probing for an alive pool
[2014-04-10 08:59:40] Pool 0 difficulty changed to 8
[2014-04-10 08:59:41] Network diff set to 73.4K
[2014-04-10 08:59:46] API bind to port 4028 failed - trying again in 30sec
add sudo on your command
i removed the cgminer-4.2.2 folder and started all over with this
then i started up cgminer ....
(now there is 2 cgminer.conf files one with "pool" on the image and one with "..." and i can not delete any of them)
Quote
Latest patch from technobit still for cgminer-4.2.2
Code:
1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-4.2.2
3. cd cgminer-4.2.2
4. git checkout 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196
5. wget https://www.dropbox.com/s/1kspms3gw0336du/5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
6. patch -p1 < 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make
Add setting to cgminer.conf
Code:
sudo nano /home/"user"/.cgminer/cgminer.conf
Code:
{
"pools" : [
{
"url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333",
"user" : "user",
"pass" : "123"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
Okay i will try that zich...
Code:
1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-4.2.2
3. cd cgminer-4.2.2
4. git checkout 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196
5. wget https://www.dropbox.com/s/1kspms3gw0336du/5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
6. patch -p1 < 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make
Add setting to cgminer.conf
Code:
sudo nano /home/"user"/.cgminer/cgminer.conf
Code:
{
"pools" : [
{
"url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333",
"user" : "user",
"pass" : "123"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
Okay i will try that zich...
then i started up cgminer ....
(now there is 2 cgminer.conf files one with "pool" on the image and one with "..." and i can not delete any of them)
Quote
[2014-04-10 08:59:39] Started cgminer 4.2.2
[2014-04-10 08:59:39] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 08:59:40] No devices detected!
[2014-04-10 08:59:40] Waiting for USB hotplug devices or press q to quit
[2014-04-10 08:59:40] Probing for an alive pool
[2014-04-10 08:59:40] Pool 0 difficulty changed to 8
[2014-04-10 08:59:41] Network diff set to 73.4K
[2014-04-10 08:59:46] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 08:59:39] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 08:59:40] No devices detected!
[2014-04-10 08:59:40] Waiting for USB hotplug devices or press q to quit
[2014-04-10 08:59:40] Probing for an alive pool
[2014-04-10 08:59:40] Pool 0 difficulty changed to 8
[2014-04-10 08:59:41] Network diff set to 73.4K
[2014-04-10 08:59:46] API bind to port 4028 failed - trying again in 30sec
conf file
Quote
{
"pools" : [
{
"url" : "url",
"user" : "user",
"pass" : "pass"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "url",
"user" : "user",
"pass" : "pass"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
I did't see anything wrong with the conf. So you need to delete existing conf file & ask cgminer to generate new conf file.
conf file
Quote
{
"pools" : [
{
"url" : "url",
"user" : "user",
"pass" : "pass"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "url",
"user" : "user",
"pass" : "pass"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
Quote
[2014-04-09 15:44:13] Started cgminer 4.2.2
[2014-04-09 15:44:13] Loaded configuration file /home/b/.cgminer/cgminer.conf
[2014-04-09 15:44:13] Fatal JSON error in configuration file.
[2014-04-09 15:44:13] Configuration file could not be used.
[2014-04-09 15:44:14] No devices detected!
[2014-04-09 15:44:14] Waiting for USB hotplug devices or press q to quit
[2014-04-09 15:44:14] Need to specify at least one pool server.
[2014-04-09 15:44:13] Loaded configuration file /home/b/.cgminer/cgminer.conf
[2014-04-09 15:44:13] Fatal JSON error in configuration file.
[2014-04-09 15:44:13] Configuration file could not be used.
[2014-04-09 15:44:14] No devices detected!
[2014-04-09 15:44:14] Waiting for USB hotplug devices or press q to quit
[2014-04-09 15:44:14] Need to specify at least one pool server.
There must be some missing of comma or apostrope on your conf.
Quote
[2014-04-09 15:44:13] Started cgminer 4.2.2
[2014-04-09 15:44:13] Loaded configuration file /home/b/.cgminer/cgminer.conf
[2014-04-09 15:44:13] Fatal JSON error in configuration file.
[2014-04-09 15:44:13] Configuration file could not be used.
[2014-04-09 15:44:14] No devices detected!
[2014-04-09 15:44:14] Waiting for USB hotplug devices or press q to quit
[2014-04-09 15:44:14] Need to specify at least one pool server.
[2014-04-09 15:44:13] Loaded configuration file /home/b/.cgminer/cgminer.conf
[2014-04-09 15:44:13] Fatal JSON error in configuration file.
[2014-04-09 15:44:13] Configuration file could not be used.
[2014-04-09 15:44:14] No devices detected!
[2014-04-09 15:44:14] Waiting for USB hotplug devices or press q to quit
[2014-04-09 15:44:14] Need to specify at least one pool server.
2. Use tplink if you can not handle it
Good luck dude
Quote
[2014-04-09 15:44:13] Started cgminer 4.2.2
[2014-04-09 15:44:13] Loaded configuration file /home/b/.cgminer/cgminer.conf
[2014-04-09 15:44:13] Fatal JSON error in configuration file.
[2014-04-09 15:44:13] Configuration file could not be used.
[2014-04-09 15:44:14] No devices detected!
[2014-04-09 15:44:14] Waiting for USB hotplug devices or press q to quit
[2014-04-09 15:44:14] Need to specify at least one pool server.
[2014-04-09 15:44:13] Loaded configuration file /home/b/.cgminer/cgminer.conf
[2014-04-09 15:44:13] Fatal JSON error in configuration file.
[2014-04-09 15:44:13] Configuration file could not be used.
[2014-04-09 15:44:14] No devices detected!
[2014-04-09 15:44:14] Waiting for USB hotplug devices or press q to quit
[2014-04-09 15:44:14] Need to specify at least one pool server.
Start cgminer with sudo !!!
hi zich
i get some errors in cgminer and when i try to save the config file
i get some errors in cgminer and when i try to save the config file
Quote
[2014-04-09 07:51:04] Started cgminer 4.2.2
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEXa device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminera detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEXb device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminerb detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEXc device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminerc detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEX8 device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminer8 detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] No devices detected!
[2014-04-09 07:51:05] Waiting for USB hotplug devices or press q to quit
[2014-04-09 07:51:05] Need to specify at least one pool server.
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEXa device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminera detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEXb device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminerb detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEXc device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminerc detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] USB init, open device failed, err -3, you don't have privilege to access - HEX8 device 3:2
[2014-04-09 07:51:05] See README file included for help
[2014-04-09 07:51:05] hexminer8 detect (3:2) failed to initialise (incorrect device?)
[2014-04-09 07:51:05] No devices detected!
[2014-04-09 07:51:05] Waiting for USB hotplug devices or press q to quit
[2014-04-09 07:51:05] Need to specify at least one pool server.
Quote
[ Error writing /home/user/.cgminer/cgminer.conf: No such file or directory ]
Hi,
Thanks for the hint! Not sure if I'm brave enough to go to 1050 Don't want to overheat the miner.
Atm it's running well with 250 and 950mV, hashrate dropped a little bit to 128GH/s, HW errors are only about 0.18% - at least for me these values seems to be fine
Wise Thanks for the hint! Not sure if I'm brave enough to go to 1050
Don't want to overheat the miner.Atm it's running well with 250 and 950mV, hashrate dropped a little bit to 128GH/s, HW errors are only about 0.18% - at least for me these values seems to be fine
Hi,
Thanks for the hint! Not sure if I'm brave enough to go to 1050 Don't want to overheat the miner.
Atm it's running well with 250 and 950mV, hashrate dropped a little bit to 128GH/s, HW errors are only about 0.18% - at least for me these values seems to be fine
Thanks for the hint! Not sure if I'm brave enough to go to 1050
Don't want to overheat the miner.Atm it's running well with 250 and 950mV, hashrate dropped a little bit to 128GH/s, HW errors are only about 0.18% - at least for me these values seems to be fine
Hello together
First of all, I would like to thank Technobit and Martin for shipping my Hex8A1 130 promptly as promised on their website (JBAWWKAVT).
I had no difficulties to install and run the Hex8A1 on a Windows 7 system with cgminer 4.0 (already running a few Bitburner Fury on separate instances of cgminer - yes, I'm a little noob thats why I use a Windows system ).
Still testing with a Corsair CX600 as dedicated PSU and some settings in cgminer. Actually using 4:263 at 1000mV and the hashrate is about 126 GH/s with +/- 6% HW errors after >100'000 shares.
edit: meanwhile testing with 8:250 at 950mV and getting around 130GH/s with no - zero - HW errors at 50'000 hashed shares
Remembering the negative statements about Technobit in other postings I have to say that my personal experience was good. This was my first order at Technobit, everything worked fine and I also got answers on my questions.
I've just ordered a HEX8A1 260 GH/s miner in the hope everything is working fine again
Best regards - and also many thanks to the helpful users here like Zich and the others for their postings.
Michael
(sorry, my english skills are not the best)
Congrats dude First of all, I would like to thank Technobit and Martin for shipping my Hex8A1 130 promptly as promised on their website (JBAWWKAVT).
I had no difficulties to install and run the Hex8A1 on a Windows 7 system with cgminer 4.0 (already running a few Bitburner Fury on separate instances of cgminer - yes, I'm a little noob thats why I use a Windows system
).Still testing with a Corsair CX600 as dedicated PSU and some settings in cgminer. Actually using 4:263 at 1000mV and the hashrate is about 126 GH/s with +/- 6% HW errors after >100'000 shares.
edit: meanwhile testing with 8:250 at 950mV and getting around 130GH/s with no - zero - HW errors at 50'000 hashed shares
Remembering the negative statements about Technobit in other postings I have to say that my personal experience was good. This was my first order at Technobit, everything worked fine and I also got answers on my questions.
I've just ordered a HEX8A1 260 GH/s miner in the hope everything is working fine again
Best regards - and also many thanks to the helpful users here like Zich and the others for their postings.
Michael
(sorry, my english skills are not the best)
If you feel brave you need more juice above 260 something like 1050. This will reduce hw errors but the chance for magic smoke to come out of the bottle is increasing
But as said this is for brave soles only
Hello together
First of all, I would like to thank Technobit and Martin for shipping my Hex8A1 130 promptly as promised on their website (JBAWWKAVT).
I had no difficulties to install and run the Hex8A1 on a Windows 7 system with cgminer 4.0 (already running a few Bitburner Fury on separate instances of cgminer - yes, I'm a little noob thats why I use a Windows system ).
Still testing with a Corsair CX600 as dedicated PSU and some settings in cgminer. Actually using 4:263 at 1000mV and the hashrate is about 126 GH/s with +/- 6% HW errors after >100'000 shares.
edit: meanwhile testing with 8:250 at 960mV and getting around 130GH/s with no - zero - HW errors at 50'000 hashed shares
Many thanks to the helpful users here for their postings.
Michael
(sorry, my english skills are not the best)
Edit2: deleted my recommendation for Technobit because my second order was paid early in April for shipping on 22th. Until today 1st of may: no shipping, no communication, no reply on requests for a status of my order - and finally the item got cheaper two or three times in the meantime. Now trying to get my money back...
First of all, I would like to thank Technobit and Martin for shipping my Hex8A1 130 promptly as promised on their website (JBAWWKAVT).
I had no difficulties to install and run the Hex8A1 on a Windows 7 system with cgminer 4.0 (already running a few Bitburner Fury on separate instances of cgminer - yes, I'm a little noob thats why I use a Windows system
).Still testing with a Corsair CX600 as dedicated PSU and some settings in cgminer. Actually using 4:263 at 1000mV and the hashrate is about 126 GH/s with +/- 6% HW errors after >100'000 shares.
edit: meanwhile testing with 8:250 at 960mV and getting around 130GH/s with no - zero - HW errors at 50'000 hashed shares
Many thanks to the helpful users here for their postings.
Michael
(sorry, my english skills are not the best)
Edit2: deleted my recommendation for Technobit because my second order was paid early in April for shipping on 22th. Until today 1st of may: no shipping, no communication, no reply on requests for a status of my order - and finally the item got cheaper two or three times in the meantime. Now trying to get my money back...
Do you know where i can get help with copying wallet + datafiles to USB, maybe from terminal cus i cant find the bitcoin wallet folder. My wallet is installed on one ubuntu and cgminer on the other as long as i use my wallet i cant use cgminer. My wallet is syncing right now and i have to use it asap, but it wont finish the next couple of days if it continues at the speed it's at now. It is more important than getting the hex running right now.
Try here:
https://bitcointalk.org/index.php?topic=522014.200
Thanks for the quick reply Zich. upgrading to newest TpLink software version did the trick, now hashing 136gh/s on the Same settings...
Nice, happy hashing
Mine is hashing for 48 Horus now on 260/1000 but I'm only getting 100GH/s. Anybody an idea why? At these settings it should put out 130GH/s or not?
What PSU did you use(brand & type)?
HEX8A1 130GH/s can eat up to 17 Amp on 12V rail.
Then check if there is any dead core / dead chip.
run command cgminer-api stats
Code:
[STATS0] =>
(
[STATS] => 0
[ID] => HEX80
[Enabled] => Y
[Status] => Alive
[Elapsed] => 10506
[MHS 5s] => 356.2G
[MHS av] => 266.3G
[Hardware Errors] => 91
[Hardware Errors%] => 2.8191
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Last Share Time] => 1396682287
[Chip Count] => 8
[Frequency] => 260
[Core Voltage] => 1008
[PIC Voltage Readings] => 1010
[Chip1 Nonces] => 430
[Chip1 Engines] => 32
[Chip1 Dupes] => 0
[Chip2 Nonces] => 343
[Chip2 Engines] => 29
[Chip2 Dupes] => 0
[Chip3 Nonces] => 418
[Chip3 Engines] => 32
[Chip3 Dupes] => 0
[Chip4 Nonces] => 392
[Chip4 Engines] => 32
[Chip4 Dupes] => 0
[Chip5 Nonces] => 413
[Chip5 Engines] => 31
[Chip5 Dupes] => 0
[Chip6 Nonces] => 392
[Chip6 Engines] => 32
[Chip6 Dupes] => 0
[Chip7 Nonces] => 411
[Chip7 Engines] => 31
[Chip7 Dupes] => 0
[Chip8 Nonces] => 338
[Chip8 Engines] => 32
[Chip8 Dupes] => 0
)
(
[STATS] => 0
[ID] => HEX80
[Enabled] => Y
[Status] => Alive
[Elapsed] => 10506
[MHS 5s] => 356.2G
[MHS av] => 266.3G
[Hardware Errors] => 91
[Hardware Errors%] => 2.8191
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Last Share Time] => 1396682287
[Chip Count] => 8
[Frequency] => 260
[Core Voltage] => 1008
[PIC Voltage Readings] => 1010
[Chip1 Nonces] => 430
[Chip1 Engines] => 32
[Chip1 Dupes] => 0
[Chip2 Nonces] => 343
[Chip2 Engines] => 29
[Chip2 Dupes] => 0
[Chip3 Nonces] => 418
[Chip3 Engines] => 32
[Chip3 Dupes] => 0
[Chip4 Nonces] => 392
[Chip4 Engines] => 32
[Chip4 Dupes] => 0
[Chip5 Nonces] => 413
[Chip5 Engines] => 31
[Chip5 Dupes] => 0
[Chip6 Nonces] => 392
[Chip6 Engines] => 32
[Chip6 Dupes] => 0
[Chip7 Nonces] => 411
[Chip7 Engines] => 31
[Chip7 Dupes] => 0
[Chip8 Nonces] => 338
[Chip8 Engines] => 32
[Chip8 Dupes] => 0
)
Thanks for the quick reply Zich. upgrading to newest TpLink software version did the trick, now hashing 136gh/s on the Same settings...
Sorry, i didn't know that you talk about HEX8A1. What i post there is for original cgminer. For HEX8A1 you need patch.
cgminer.conf generated by cgminer after you run cgminer for the first time. After cgminer run, type S then W then enter.
After that you can edit it.
Latest patch from technobit still for cgminer-4.2.2
Add setting to cgminer.conf
cgminer.conf generated by cgminer after you run cgminer for the first time. After cgminer run, type S then W then enter.
After that you can edit it.
Latest patch from technobit still for cgminer-4.2.2
Code:
1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-4.2.2
3. cd cgminer-4.2.2
4. git checkout 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196
5. wget https://www.dropbox.com/s/1kspms3gw0336du/5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
6. patch -p1 < 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make
2. mv cgminer cgminer-4.2.2
3. cd cgminer-4.2.2
4. git checkout 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196
5. wget https://www.dropbox.com/s/1kspms3gw0336du/5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
6. patch -p1 < 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make
Add setting to cgminer.conf
Code:
sudo nano /home/"user"/.cgminer/cgminer.conf
Code:
{
"pools" : [
{
"url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333",
"user" : "user",
"pass" : "123"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333",
"user" : "user",
"pass" : "123"
}
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}
Here is how to compile
Code:
git clone https://github.com/ckolivas/cgminer.git
cd cgminer
wget https://dl.dropboxusercontent.com/u/8082585/cg/2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
git checkout 2786526d9f1acb7bd903ece3c822c2c9203aa0b7
patch -p1 < 2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
./autogen.sh --enable-hexminer8
make
cd cgminer
wget https://dl.dropboxusercontent.com/u/8082585/cg/2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
git checkout 2786526d9f1acb7bd903ece3c822c2c9203aa0b7
patch -p1 < 2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
./autogen.sh --enable-hexminer8
make
I start cgminer with the following line:
Code:
sudo ./cgminer -c ./cgminer.conf --hexminer8-set-diff-to-one 0 --hexminer8-chip-mask 255 --hexminer8-voltage 1000 --hexminer8-options 8:260
where cgminer.conf is in the same folder and with your regular settings.It could'nt find cgminer.conf
I get an error: SEM: hexminer8 USB failed to get (65537) '/tmp/cgminer-us bash: syntax error near unexpected token....
I had already made cgminer 4.2.3 and entered that direction and continued with "wget...."
I followed zich's post
https://bitcointalksearch.org/topic/m.6079926
Mine is hashing for 48 Horus now on 260/1000 but I'm only getting 100GH/s. Anybody an idea why? At these settings it should put out 130GH/s or not?
What PSU did you use(brand & type)?
HEX8A1 130GH/s can eat up to 17 Amp on 12V rail.
Then check if there is any dead core / dead chip.
run command cgminer-api stats
Code:
[STATS0] =>
(
[STATS] => 0
[ID] => HEX80
[Enabled] => Y
[Status] => Alive
[Elapsed] => 10506
[MHS 5s] => 356.2G
[MHS av] => 266.3G
[Hardware Errors] => 91
[Hardware Errors%] => 2.8191
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Last Share Time] => 1396682287
[Chip Count] => 8
[Frequency] => 260
[Core Voltage] => 1008
[PIC Voltage Readings] => 1010
[Chip1 Nonces] => 430
[Chip1 Engines] => 32
[Chip1 Dupes] => 0
[Chip2 Nonces] => 343
[Chip2 Engines] => 29
[Chip2 Dupes] => 0
[Chip3 Nonces] => 418
[Chip3 Engines] => 32
[Chip3 Dupes] => 0
[Chip4 Nonces] => 392
[Chip4 Engines] => 32
[Chip4 Dupes] => 0
[Chip5 Nonces] => 413
[Chip5 Engines] => 31
[Chip5 Dupes] => 0
[Chip6 Nonces] => 392
[Chip6 Engines] => 32
[Chip6 Dupes] => 0
[Chip7 Nonces] => 411
[Chip7 Engines] => 31
[Chip7 Dupes] => 0
[Chip8 Nonces] => 338
[Chip8 Engines] => 32
[Chip8 Dupes] => 0
)
(
[STATS] => 0
[ID] => HEX80
[Enabled] => Y
[Status] => Alive
[Elapsed] => 10506
[MHS 5s] => 356.2G
[MHS av] => 266.3G
[Hardware Errors] => 91
[Hardware Errors%] => 2.8191
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Last Share Time] => 1396682287
[Chip Count] => 8
[Frequency] => 260
[Core Voltage] => 1008
[PIC Voltage Readings] => 1010
[Chip1 Nonces] => 430
[Chip1 Engines] => 32
[Chip1 Dupes] => 0
[Chip2 Nonces] => 343
[Chip2 Engines] => 29
[Chip2 Dupes] => 0
[Chip3 Nonces] => 418
[Chip3 Engines] => 32
[Chip3 Dupes] => 0
[Chip4 Nonces] => 392
[Chip4 Engines] => 32
[Chip4 Dupes] => 0
[Chip5 Nonces] => 413
[Chip5 Engines] => 31
[Chip5 Dupes] => 0
[Chip6 Nonces] => 392
[Chip6 Engines] => 32
[Chip6 Dupes] => 0
[Chip7 Nonces] => 411
[Chip7 Engines] => 31
[Chip7 Dupes] => 0
[Chip8 Nonces] => 338
[Chip8 Engines] => 32
[Chip8 Dupes] => 0
)
Mine is hashing for 48 Horus now on 260/1000 but I'm only getting 100GH/s. Anybody an idea why? At these settings it should put out 130GH/s or not?
Does anybody know how to get i working with bfgminer?
It won't run, you can use cgminer, there is a windows version too.
Does anybody know how to get i working with bfgminer?
Some update, after 20+ hours running at 240/900 I get 120+ GH stable.
The temperature is almost 10 degrees down to 46C at 26C room
Chart in OP updated.
@Gator-hex Thanks, fixed
The temperature is almost 10 degrees down to 46C at 26C room
Chart in OP updated.
@Gator-hex Thanks, fixed
Does Marto have these in stock I wonder? I'd order some but "March" is pretty vague. 1st March is good, 31st March is meh!
Nice review and pics as always.
Nice review and pics as always.
Nice review as always
So it's can run with 8 chips command(8:260) right?
Woo, patch for cgminer 4.0.0
Yup it can So it's can run with 8 chips command(8:260) right?
Woo, patch for cgminer 4.0.0However if you run both 8 chip and 4 chip to a same host leave the chip count to 8, otherwise use 4 as chipcount
Nice
Nice review as always
So it's can run with 8 chips command(8:260) right?
Woo, patch for cgminer 4.0.0
Yup it can So it's can run with 8 chips command(8:260) right?
Woo, patch for cgminer 4.0.0However if you run both 8 chip and 4 chip to a same host leave the chip count to 8, otherwise use 4 as chipcount
Sorry, my miss.
130GH/s with 8 chip?
It's 16.25 Gh/s per chip and it's half of Bitmine's ANN.
It's 16.25 Gh/s per chip and it's half of Bitmine's ANN.
No, this is 4 chips version
130GH/s with 8 chip?
It's 16.25 Gh/s per chip and it's half of Bitmine's ANN.
It's 16.25 Gh/s per chip and it's half of Bitmine's ANN.
Nice review as always
So it's can run with 8 chips command(8:260) right?
Woo, patch for cgminer 4.0.0
So it's can run with 8 chips command(8:260) right?
Woo, patch for cgminer 4.0.0
The first Coincraft miner from Technobit was HEX8A1 260GH populated with 8 A1 chips. Even though it's a good board, the cooling is very lоud and in my opinion this device is not suitable for home usage or at least not with the stock fans. Apparently Marto & the team acknowledged the need for a quieter solution and since the A1s are very powerful the only way around seems to be cutting their number in half, so here is it the 4 chip version of the board.
The board itself is identical with the 260GH model, the only difference is the main heatsink and the fans.
HEX8A1 260GH and 130GH versions side by side
Performance:
At the Technobit's site, HEX8A1 is advertised as 130GH miner in turbo mode, so let's see how it handles various settings.
Indeed with moderate overclock aka Turbo mode the board is hashing with 130GH/s. Let's focus on performance and power consumption. According to Bitmine's pre-production specifications, the chip can deliver 40GH in Turbo mode with power usage of 1W/GH as you can see from chart bellow that is not the case.
The power supply used for the test is FSP600 50ARN 88+, it is rated to "reach up to 88% efficiency" that's what the second power column is representing Wall power consumption minus 12%, the efficiency of the board is calculated with these numbers. I tried an CoolerMaster B600 (85%) for comparison but it draws more power and was unable to start the board at low 220/850mV. I had similar problems with the 260GH version so it depends on the chips and PSU.
It is also important to mention that the real chip freq is multiplied by 4 so when you say 250 it's really 1000Mhz core chip frequency.
The board comes with 2 x 6 pin PCI-e power connectors, but according to Technobit's site there maybe versions with only one which seems reasonable.
Each chip has 32 Engines, you can have 1 or 2 faulty per chip but thats not a problem. If you try to "undervolt" more keep an eye on the Engines if there is not enough juice you will get lower engines which is a good indicator together with the HW errors. In the end it's all about finding the right ratio for your device - freq/voltage. I recommend 960/1000 it's very stable and you will get results from 128 to 132 GH/s depending on your chips, @ 258/1000 you'll get similar results.
Cooling:
Compared to the 260GH board I can only say: Blissful silence !!!
The fans:
Evercool EC9225M12SA
Dimensions: 92x92x25 mm
Power: 1.8 W
Speed: 2200 rpm
Air Flow: 40.9 CFM
Noise: 25 dB
If you are planing on replacing these with Arctic Cooling F9s I recommend lower settings ie 230-240Mhz. This board is slightly hotter than the 260Gh model, at 260/1000 the temperature of the main heatsink is 55C (close to the chips) at 26C room temperature.
Mine board comes with rather short treated rods and it is not suitable for stacking, you'll have to replace them with longer so there is enough space between the two back to back fans.
Note: According to Coincraft A1 specification about 70% of the power is being dissipated through the ground pad and about 30% through the top of the package.
Pricing:
With the latest GOX problems the bitcoin price is down. As always investment in bitcoin equipment is risky but let's see what can you order/buy from various mining manufactures. Technobit are selling HEX8A1 for 499 Euros full price which seems normal to me.
As you can see from the chart the main competitor to HEX8A1 is Bitmain's AntMiner, especially if you live in a country where Customs are not a problem for the rest of us importing an Chinese miner can be a hassle. On the other hand Bitmine are selling fully equipped miner with PSU and everything you need. Even more interesting is the newcomer - The UK based company BitcoinUltra, they have good price and ETA, but no working prototype. The race is on and much more to come from BitFury 2 and ASICMINER with their crazy low price per GH, even BFL can ship something soon - doubt it
Software:
Technobit's HEX line still lags proper mining software for Windows where you can only mine with their special HEXMiner, the driver is in the inf folder. The setup is similar to HEX16A so you can check nemercry's video tutorial for Windows.
As with the previous HEX board I highly recommend that you get one cheap TP-Link TL-MR3020 and flash it with the firmware from Technobit's website. You can also order it directly from them at slightly higher price, but pre-flashed and ready to rock. In the end you are paying a thousand euros for the miner, so 30 more for the router is nothing. Of course if you have a linux host it will best to just compile cgminer with the latest patch from Technobit or download my build for Ubuntu x64 cgminer4_0.2.2
Here is how to compile
I start cgminer with the following line:
Pros:
Cons:
Conclusion:
The efficiency of the board is good, not as good as promised by the manufacturer but still better than most of the miners on the market. I'm pleased to see that Technobit decided to make this version of the board it's a lot more environment friendly. In the end the Bulgaria based company once again did a great job with this challenge and what surprises me the most is that Technobit are shipping before Bitmine.ch
Full gallery can be found here: http://imgbox.com/g/I9gXuWFlZi
best
2GOOD
The board itself is identical with the 260GH model, the only difference is the main heatsink and the fans.
HEX8A1 260GH and 130GH versions side by side
Performance:
At the Technobit's site, HEX8A1 is advertised as 130GH miner in turbo mode, so let's see how it handles various settings.
Indeed with moderate overclock aka Turbo mode the board is hashing with 130GH/s. Let's focus on performance and power consumption. According to Bitmine's pre-production specifications, the chip can deliver 40GH in Turbo mode with power usage of 1W/GH as you can see from chart bellow that is not the case.
The power supply used for the test is FSP600 50ARN 88+, it is rated to "reach up to 88% efficiency" that's what the second power column is representing Wall power consumption minus 12%, the efficiency of the board is calculated with these numbers. I tried an CoolerMaster B600 (85%) for comparison but it draws more power and was unable to start the board at low 220/850mV. I had similar problems with the 260GH version so it depends on the chips and PSU.
It is also important to mention that the real chip freq is multiplied by 4 so when you say 250 it's really 1000Mhz core chip frequency.
The board comes with 2 x 6 pin PCI-e power connectors, but according to Technobit's site there maybe versions with only one which seems reasonable.
Each chip has 32 Engines, you can have 1 or 2 faulty per chip but thats not a problem. If you try to "undervolt" more keep an eye on the Engines if there is not enough juice you will get lower engines which is a good indicator together with the HW errors. In the end it's all about finding the right ratio for your device - freq/voltage. I recommend 960/1000 it's very stable and you will get results from 128 to 132 GH/s depending on your chips, @ 258/1000 you'll get similar results.
Cooling:
Compared to the 260GH board I can only say: Blissful silence !!!
The fans:
Evercool EC9225M12SA
Dimensions: 92x92x25 mm
Power: 1.8 W
Speed: 2200 rpm
Air Flow: 40.9 CFM
Noise: 25 dB
If you are planing on replacing these with Arctic Cooling F9s I recommend lower settings ie 230-240Mhz. This board is slightly hotter than the 260Gh model, at 260/1000 the temperature of the main heatsink is 55C (close to the chips) at 26C room temperature.
Mine board comes with rather short treated rods and it is not suitable for stacking, you'll have to replace them with longer so there is enough space between the two back to back fans.
Note: According to Coincraft A1 specification about 70% of the power is being dissipated through the ground pad and about 30% through the top of the package.
Pricing:
With the latest GOX problems the bitcoin price is down. As always investment in bitcoin equipment is risky but let's see what can you order/buy from various mining manufactures. Technobit are selling HEX8A1 for 499 Euros full price which seems normal to me.
As you can see from the chart the main competitor to HEX8A1 is Bitmain's AntMiner, especially if you live in a country where Customs are not a problem for the rest of us importing an Chinese miner can be a hassle. On the other hand Bitmine are selling fully equipped miner with PSU and everything you need. Even more interesting is the newcomer - The UK based company BitcoinUltra, they have good price and ETA, but no working prototype. The race is on and much more to come from BitFury 2 and ASICMINER with their crazy low price per GH, even BFL can ship something soon - doubt it
Software:
Technobit's HEX line still lags proper mining software for Windows where you can only mine with their special HEXMiner, the driver is in the inf folder. The setup is similar to HEX16A so you can check nemercry's video tutorial for Windows.
As with the previous HEX board I highly recommend that you get one cheap TP-Link TL-MR3020 and flash it with the firmware from Technobit's website. You can also order it directly from them at slightly higher price, but pre-flashed and ready to rock. In the end you are paying a thousand euros for the miner, so 30 more for the router is nothing. Of course if you have a linux host it will best to just compile cgminer with the latest patch from Technobit or download my build for Ubuntu x64 cgminer4_0.2.2
Here is how to compile
Code:
git clone https://github.com/ckolivas/cgminer.git
cd cgminer
wget https://dl.dropboxusercontent.com/u/8082585/cg/2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
git checkout 2786526d9f1acb7bd903ece3c822c2c9203aa0b7
patch -p1 < 2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
./autogen.sh --enable-hexminer8
make
cd cgminer
wget https://dl.dropboxusercontent.com/u/8082585/cg/2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
git checkout 2786526d9f1acb7bd903ece3c822c2c9203aa0b7
patch -p1 < 2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch
./autogen.sh --enable-hexminer8
make
I start cgminer with the following line:
Code:
sudo ./cgminer -c ./cgminer.conf --hexminer8-set-diff-to-one 0 --hexminer8-chip-mask 255 --hexminer8-voltage 1000 --hexminer8-options 8:260
where cgminer.conf is in the same folder and with your regular settings.Pros:
- EU Based
- Efficiency - 28nm
- Availability
- Software voltage control
- Half the price, half the performance compared to the 260GH model
Cons:
- No thermal sensor
- Difficult stacking
- as usual no cgminer/bfgminer for Windows
Conclusion:
The efficiency of the board is good, not as good as promised by the manufacturer but still better than most of the miners on the market. I'm pleased to see that Technobit decided to make this version of the board it's a lot more environment friendly. In the end the Bulgaria based company once again did a great job with this challenge and what surprises me the most is that Technobit are shipping before Bitmine.ch
Full gallery can be found here: http://imgbox.com/g/I9gXuWFlZi
best
2GOOD
Jump to: