I just flashed one of these http://www.amazon.com/TP-LINK-TL-WR703N-Portable-802-11n-Wireless/dp/B0083Z54P0/ref=sr_1_2?s=pc&ie=UTF8&qid=1455441733&sr=1-2&keywords=TP-LINK+TL-WR703N flashed it
to the https://ehash.com/product/avalon4-module-1t/ avalon4.1 firmware using this guide http://www.shadowandy.net/2015/03/flashing-tp-link-tl-wr703n-v1-7-to-openwrt.htm it took me a few days to get it down but i did it .
the TPLInk 703n router I used was one of the locked ones with 1,7 firmware,
I just bought a TL-MR3020 it's due today . I'm gonna see how far i can push it.
Topic: How to upgrade TPLINK TL-MR3020 firmware to technobit openwrt (Read 57314 times)
February 13, 2016, 11:29:15 AM
Nice job !
Is it possible to have source code ? (i wants to make my own firmware...)
thanks
Is it possible to have source code ? (i wants to make my own firmware...)
thanks
Would you be able to plug in an Antminer U1/U2 and use it with the CGMiner interface?
No, all non technobit miner driver is not compile on the firmware.
No, as far as i know. You can try to compile the cgminer for openwrt. I never try since it's out of my league
Would you be able to plug in an Antminer U1/U2 and use it with the CGMiner interface?
No, all non technobit miner driver is not compile on the firmware.
No, as far as i know. You can try to compile the cgminer for openwrt. I never try since it's out of my league
Would you be able to plug in an Antminer U1/U2 and use it with the CGMiner interface?
No, all non technobit miner driver is not compile on the firmware.
Would you be able to plug in an Antminer U1/U2 and use it with the CGMiner interface?
No, all non technobit miner driver is not compile on the firmware.
Would you be able to plug in an Antminer U1/U2 and use it with the CGMiner interface?
February 28, 2015, 07:01:02 AM
Can anyone make this firmware 0.4b-4.0.0 to work with Technobit Asic & USB Erupters (AntMiners) ?
February 22, 2015, 05:25:02 AM
Thanks for the guide.
Juste a question : i have an old version of openwrt ("OpenWrt Barrier Breaker r40295"), i think it is a 0.3.0. It is working very well, but i'm using a DHCP configuration.
I want to update to 0.4.0, should i change network mode to static configuration ?
When i'm going to the "Network/interfaces" screen, and i select "static", i cannot immediately set the new address, i must click on a "Switch protocol" button. If i click, will it not reset the address immediately, making the tplink not acessible ?
Juste a question : i have an old version of openwrt ("OpenWrt Barrier Breaker r40295"), i think it is a 0.3.0. It is working very well, but i'm using a DHCP configuration.
I want to update to 0.4.0, should i change network mode to static configuration ?
When i'm going to the "Network/interfaces" screen, and i select "static", i cannot immediately set the new address, i must click on a "Switch protocol" button. If i click, will it not reset the address immediately, making the tplink not acessible ?
No, no need to change to static if you want to upgrade to 0.4.0. Just uncheck the save setting option. After upgrade, the default ip is 192.168.0.99.
0.4.0 come with static option, but do not change to DHCP
February 22, 2015, 05:17:53 AM
Thanks for the guide.
Juste a question : i have an old version of openwrt ("OpenWrt Barrier Breaker r40295"), i think it is a 0.3.0. It is working very well, but i'm using a DHCP configuration.
I want to update to 0.4.0, should i change network mode to static configuration ?
When i'm going to the "Network/interfaces" screen, and i select "static", i cannot immediately set the new address, i must click on a "Switch protocol" button. If i click, will it not reset the address immediately, making the tplink not acessible ?
Juste a question : i have an old version of openwrt ("OpenWrt Barrier Breaker r40295"), i think it is a 0.3.0. It is working very well, but i'm using a DHCP configuration.
I want to update to 0.4.0, should i change network mode to static configuration ?
When i'm going to the "Network/interfaces" screen, and i select "static", i cannot immediately set the new address, i must click on a "Switch protocol" button. If i click, will it not reset the address immediately, making the tplink not acessible ?
December 29, 2014, 01:10:10 AM
DICE only release http://technobit.eu/OK_DICE.rar
* For DICE version DHCP is enebled by default, when flashing from older technobit img DO NOT KEEP SETTINGS!!!!
*UPDATED + patch 29_12_2014
If you are using tbdice.org solo pool you can find your TP-link IP address by visiting http://tbdice.org/myminers/index.php from a PC in the same LAN where your TP-link with DICE firmware is
* For DICE version DHCP is enebled by default, when flashing from older technobit img DO NOT KEEP SETTINGS!!!!
*UPDATED + patch 29_12_2014
If you are using tbdice.org solo pool you can find your TP-link IP address by visiting http://tbdice.org/myminers/index.php from a PC in the same LAN where your TP-link with DICE firmware is
OP updated.
December 26, 2014, 06:06:15 AM
super
December 25, 2014, 03:02:48 PM
DICE only release http://technobit.eu/DICE.rar
* For DICE ersion DHCP is enebled by default, when flashing fro olde technobit img DO NOT KEEP SETINGS!!!!
* For DICE ersion DHCP is enebled by default, when flashing fro olde technobit img DO NOT KEEP SETINGS!!!!
December 24, 2014, 12:29:48 PM
still nothing ....
December 24, 2014, 02:32:11 AM
Cool
December 24, 2014, 02:13:25 AM
A new firmware how did I miss that
No, you didn't
That is screenshot from marto, new firmware still not release yet.
December 24, 2014, 01:53:25 AM
A new firmware how did I miss that
December 24, 2014, 01:22:33 AM
We still waiting for latest firmware release from marto. Screen shot on DICE thread is using cgminer 4.8.0
There is a change that firmware 0.4.0 had no support for DICE.
There is a change that firmware 0.4.0 had no support for DICE.
December 23, 2014, 06:03:21 PM
I have 4.1b but it's on my main PC and I'm away for holidays. Will talk to Martin and let you know 
P.S.
===
I successfully mine on 1043nd
P.S.
===
I successfully mine on 1043nd
December 23, 2014, 05:27:58 PM
Code:
root@MINER:~# lsusb
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04d8:0034 Microchip Technology, Inc.
Bus 001 Device 004: ID 04d8:0034 Microchip Technology, Inc.
Code:
cgminer version 4.6.1 - Started: [2014-12-24 00:25:03]
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
ST: 3 SS: 0 NB: 1 LW: 108 GF: 0 RF: 0
Connected to uk1.ghash.io diff 96 with stratum as user ejko.1
Block: 8e6b5226... Diff:39.5G Started: [00:25:03] Best share: 0
--------------------------------------------------------------------------------
[U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
Hotplug interval:5
0 USB devices, 0 enabled, 0 disabled, 0 zombie
ANY IDEAS !?
Jump to: