@marto74
I'm interested in buying up to 5 boards and would like to host it with you. Will you oc these units if they are hosted?
Topic: TECHNOBIT S-HASH minig board and Bitfury - page 23. (Read 46677 times)
Is the price listed with or without VAT?
This is full price .There is no VAT as far technobit is working as a distance sales.
That's why for bigger orders I suggest to use EU VAT registered company as a customer.
PM for details
I was hoping for 8 chip version 
Price/performance would be worse, because of the fixed cost for the power regulator and other components. That's true, but i already run out of cash because BFL still not ship & avalon also late.
I was hoping for 8 chip version
Price/performance would be worse, because of the fixed cost for the power regulator and other components.
I was hoping for 8 chip version
I have a custom case for that -see sig
@spotswood
I can send you drwawings or 3d part of board when Iam at home.
cheers
Foofighter
@spotswood
I can send you drwawings or 3d part of board when Iam at home.
cheers
Foofighter
All I need is a simple drawing. Thanks!
Is the price listed with or without VAT?
Hey marto,
could you add 4pin connection cables to you shop for chaining miners?
cheers
Foofighter
could you add 4pin connection cables to you shop for chaining miners?
cheers
Foofighter
Email send for Vat order, waiting instructions
I measured 75 oC between the inductors of the power supply.
The temperature of the board between the ASICs was rather low,
35 oC or something. Used a big heatsink that was cooled with forced
air. The bottom side of the board was bolted to the heatsink and no
thermal paste was used.
I'm running the same board now without a heatsink, but just with an old undervolted fan pointed at the top of the board. Board temp is about 60 oC and running fine (41-42 GH/sec). The temperature of the board between the ASICs was rather low,
35 oC or something. Used a big heatsink that was cooled with forced
air. The bottom side of the board was bolted to the heatsink and no
thermal paste was used.
Here :
and here :
and here :
Looks like bitburnerXX realy
Nice, would love to see it. Were can I find an image
of the bitburner board?
intron
There is an option in the site
Shipping costs to the U.S.?
I have a custom case for that -see sig
@spotswood
I can send you drwawings or 3d part of board when Iam at home.
cheers
Foofighter
@spotswood
I can send you drwawings or 3d part of board when Iam at home.
cheers
Foofighter
Please provide a mechanical drawing of the board so others can build cases for these. 
Hashing some time now at BTC-G (OC-ed):
SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0
intron
SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0
intron
Thank you Intron.
And Temp ?
Is OC temp acceptable, Intron?
I measured 75 oC between the inductors of the power supply.
The temperature of the board between the ASICs was rather low,
35 oC or something. Used a big heatsink that was cooled with forced
air. The bottom side of the board was bolted to the heatsink and no
thermal paste was used.
intron
Hashing some time now at BTC-G (OC-ed):
SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0
intron
SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0
intron
Thank you Intron.
And Temp ?
Is OC temp acceptable, Intron?
Temp with 1 Fan is 50-55°C so no problem @40GH/s
power regulator should withstand up to 120° C according to spec. and chips could also take a lot more according to punin.
EDIT: I used no heatsink
Hashing some time now at BTC-G (OC-ed):
SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0
intron
SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0
intron
Thank you Intron.
And Temp ?
Is OC temp acceptable, Intron?
@ least Fan will be required
We'll offer a fan and heatsink are included in the price
We'll offer a fan and heatsink are included in the price
And with your Fan and Heatsink included, 4O gh/s is ok ?
Hashing some time now at BTC-G (OC-ed):
SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0
intron
Jump to: