TECHNOBIT S-HASH minig board and Bitfury - page 8.

vulgartrendkill

hero member

Activity: 518

Merit: 500

Quote from: warhawk187 on December 03, 2013, 09:41:19 AM

Quote from: easynote on December 03, 2013, 09:00:19 AM

Quote from: basd82 on December 02, 2013, 05:31:59 PM

Quote from: easynote on December 02, 2013, 05:23:58 PM

Where is my shipment? Tracking not work....

6 nano to portugal

You two ?

I gues no respons form technobit either?

THey just respond

Quote from: technobit

Your sending is delivered and signed, just ask DPD @ your country.
If needed I'll ask them for signed copy.
There is no way Paypal to judge

I wonder just becouse i posted here?

In short they think " your problem", no technobit its your.

A little custtomer service would be nice.

Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender!

Provide the info requeste a week ago or send my 2 miners or do a refund.

Paypal also require a signigture as proof

Technobit dont responde to my emails! Im pissed of now!!!!!

EDIT: The items arrive just now Wink

Let us know how it hashes.

Does anyone know if cscapes firmware will work on these, or where it can be found? This ~36Gh/s per unit while it runs super cool leaves a lot of room for improvement. The Bitburner Furys I have, although poorer in quality, still manage to pull ~50Gh/s per board.

I can confirm that Cscape`s firmware does run on the s hash technobit boards. However please don`t expect a hash rate improve.

As far as I know, "software" overclocking on these boards is not possible.

easynote

hero member

Activity: 700

Merit: 500

CryptoTalk.Org - Get Paid for every Post!

nano's hash power x6 por easynote | estradasportuguesas.net, no Flickr

6 nanofury's with bfgminer 3.8

warhawk187

sr. member

Activity: 327

Merit: 250

Quote from: easynote on December 03, 2013, 09:00:19 AM

Quote from: basd82 on December 02, 2013, 05:31:59 PM

Quote from: easynote on December 02, 2013, 05:23:58 PM

Where is my shipment? Tracking not work....

6 nano to portugal

You two ?

I gues no respons form technobit either?

THey just respond

Quote from: technobit

Your sending is delivered and signed, just ask DPD @ your country.
If needed I'll ask them for signed copy.
There is no way Paypal to judge

I wonder just becouse i posted here?

In short they think " your problem", no technobit its your.

A little custtomer service would be nice.

Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender!

Provide the info requeste a week ago or send my 2 miners or do a refund.

Paypal also require a signigture as proof

Technobit dont responde to my emails! Im pissed of now!!!!!

EDIT: The items arrive just now Wink

Let us know how it hashes.

Does anyone know if cscapes firmware will work on these, or where it can be found? This ~36Gh/s per unit while it runs super cool leaves a lot of room for improvement. The Bitburner Furys I have, although poorer in quality, still manage to pull ~50Gh/s per board.

easynote

hero member

Activity: 700

Merit: 500

CryptoTalk.Org - Get Paid for every Post!

Quote from: basd82 on December 02, 2013, 05:31:59 PM

Quote from: easynote on December 02, 2013, 05:23:58 PM

Where is my shipment? Tracking not work....

6 nano to portugal

You two ?

I gues no respons form technobit either?

THey just respond

Quote from: technobit

Your sending is delivered and signed, just ask DPD @ your country.
If needed I'll ask them for signed copy.
There is no way Paypal to judge

I wonder just becouse i posted here?

In short they think " your problem", no technobit its your.

A little custtomer service would be nice.

Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender!

Provide the info requeste a week ago or send my 2 miners or do a refund.

Paypal also require a signigture as proof

Technobit dont responde to my emails! Im pissed of now!!!!!

EDIT: The items arrive just now Wink

warhawk187

sr. member

Activity: 327

Merit: 250

Quote from: cscape on November 30, 2013, 07:24:40 AM

Quote from: Foofighter on November 30, 2013, 07:21:56 AM

I run 1.0.3 and seem to have higher hash rates:

That's because you got the board from me, not Technobit, so it has different chips and different voltage.

Will your firmware work on these boards? Has anyone managed to get any interface besides the web interface that leaves lots to be desired?

basd82

newbie

Activity: 13

Merit: 0

Quote from: easynote on December 02, 2013, 05:23:58 PM

Where is my shipment? Tracking not work....

6 nano to portugal

You two ?

I gues no respons form technobit either?

THey just respond

Quote from: technobit

Your sending is delivered and signed, just ask DPD @ your country.
If needed I'll ask them for signed copy.
There is no way Paypal to judge

I wonder just becouse i posted here?

In short they think " your problem", no technobit its your.

A little custtomer service would be nice.

Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender!

Provide the info requeste a week ago or send my 2 miners or do a refund.

Paypal also require a signigture as proof

easynote

hero member

Activity: 700

Merit: 500

CryptoTalk.Org - Get Paid for every Post!

Where is my shipment? Tracking not work....

6 nano to portugal

basd82

newbie

Activity: 13

Merit: 0

Quote from: marto74 on October 28, 2013, 04:19:52 PM

Quote from: basd82 on October 28, 2013, 02:44:12 PM

Quote from: marto74 on October 28, 2013, 12:51:10 PM

Hi all,
today the first batch of NanoFury camo out of trough hole assembly
here are some photos of the very first board of the production run.
http://s24.postimg.org/poo9r9y81/nano1.jpg http://s24.postimg.org/hx7jspu2p/nano2.jpg http://s24.postimg.org/le9lvot4x/nano3.jpg

We are working on heat sink now. To be ready until tomorrow morning then start shipping

I hope you learn to make beter estimate about the time before shipping.

First you say this week (the week of 15 oktober)
Then you say last week....
Now you say this week... i hope so

Also get someone that answers mail. You say on the site

Quote

CONTACT OUR EXPERT SUPPORT TEAM! 24/7 support hotline mail [email protected]

Thank you for the input

I still do not have the miners, technobit does not repond or verry late.

I still do not have my two USB miners

My packes was reported shiped and was not tracebol trow site of technot bit.
on 18 1 get quick respons with tracking url.
It says parcel deliverd, i reported it was not, i got respons that he will send a letter to transporter.

I mailed technobit on 26-11 no respons
I mailed them today again.

But i think i won't get a respons het al, and my order is LOST, no money back, no miners.

No way to get money back or miners.
Because i reported a dispute earlyer because techno bit dit not respond, and i closed them because they finaly told me ship time that was of bye 2 weeks bye the way.

But i can't reopend or open new dispute with paypal i will contact i gues because of this

Technobit apparently claimed that 24/7 email support have that is not true. It is very bad reaction time to mail or NOT at all.
http://s30.postimg.org/jiq5yn2ip/Knipsel4.png

vulgartrendkill

hero member

Activity: 518

Merit: 500

So cscape would your firmware 1.10 work on the technobit boards and if so where could I download it from?

Foofighter

hero member

Activity: 882

Merit: 547

BTC Mining Hardware, Trading and more

Quote from: cscape on November 30, 2013, 07:24:40 AM

Quote from: Foofighter on November 30, 2013, 07:21:56 AM

I run 1.0.3 and seem to have higher hash rates:

That's because you got the board from me, not Technobit, so it has different chips and different voltage.

yes, I appreciate your high quality work!

cscape

sr. member

Activity: 251

Merit: 250

Quote from: Foofighter on November 30, 2013, 07:21:56 AM

I run 1.0.3 and seem to have higher hash rates:

That's because you got the board from me, not Technobit, so it has different chips and different voltage.

Foofighter

hero member

Activity: 882

Merit: 547

BTC Mining Hardware, Trading and more

I run 1.0.3 and seem to have higher hash rates:

Welcome to the S-HASH, running firmware version 0.1.3
Hashing speeds
min    chip 0   chip 1   chip 2   chip 3   chip 4   chip 5   chip 6   chip 7   chip 8   chip 9   chip 10   chip 11   chip 12   chip 13   chip 14   chip 15   Total (GH/s)
1   2.0   2.4   2.1   3.1   2.9   3.1   1.4   2.8   2.9   2.9   2.9   2.1   2.7   2.7   3.4   1.6   41.2
5   2.3   2.4   2.6   2.3   2.7   2.5   1.2   3.0   2.2   2.5   2.5   2.2   2.8   2.8   2.8   2.5   39.5
15   2.6   2.6   2.6   2.5   2.8   2.5   1.2   2.9   2.2   2.6   2.6   2.6   2.6   2.7   2.7   2.5   40.3

vulgartrendkill

hero member

Activity: 518

Merit: 500

warhawk187

sr. member

Activity: 327

Merit: 250

I'm running 0.1.6, where can I find the more updated firmware? The one I got is from technobit.eu

This is annoying, heres the tables from my two S-Hash cards:

min   chip 0   chip 1   chip 2   chip 3   chip 4   chip 5   chip 6   chip 7   chip 8   chip 9   chip 10   chip 11   chip 12   chip 13   chip 14   chip 15   Total (GH/s)
1   2.1   2.3   2.4   1.7   2.3   2.1   2.5   2.1   2.1   2.1   1.6   1.7   2.6   1.6   2.4   2.5   34.4
5   2.1   2.4   2.5   2.2   2.1   2.5   2.3   2.1   2.3   2.7   2.0   2.1   2.4   2.0   2.3   2.5   36.4
15   2.2   2.3   2.4   2.5   2.1   2.4   2.4   2.1   2.4   2.6   2.3   2.2   2.5   2.0   2.3   2.4   37.0

min   chip 0   chip 1   chip 2   chip 3   chip 4   chip 5   chip 6   chip 7   chip 8   chip 9   chip 10   chip 11   chip 12   chip 13   chip 14   chip 15   Total (GH/s)
1   2.5   2.6   2.4   2.6   2.4   2.1   2.1   2.4   2.5   1.4   2.8   1.9   2.1   2.3   2.1   2.4   36.7
5   2.3   2.3   2.4   2.5   2.5   2.3   2.7   2.1   2.4   1.1   2.7   2.3   2.3   2.4   2.3   2.4   37.1
15   2.4   2.4   2.2   2.3   2.4   2.4   2.5   2.3   2.2   1.2   2.5   2.3   2.4   2.3   2.3   2.4   36.5

by the sound of it, it seems these are NOT even close to hitting the as advertised "40Gh/s"

LordTheron

full member

Activity: 197

Merit: 100

Quote from: warhawk187 on November 29, 2013, 04:05:28 PM

Also, is anyone actually getting 40Gh/s on these??

I get 39.8GH average on one of my boards (1 chips is almost half the speed) and over 41GH on the other 2. No overclocking done yet.

15 2.7 2.6 2.5 2.6 2.8 2.1 2.5 2.7 2.8 3.1 2.1 2.7 2.6 2.6 2.7 2.7 41.7

I will overclock them tomorrow if I get spare minute and post results I get with what value resistors.

LordTheron

full member

Activity: 197

Merit: 100

Quote

sure getting the 40GH, why use more then 1 pool?

How about pool failover? Kinda useful

cscape

sr. member

Activity: 251

Merit: 250

Quote from: warhawk187 on November 29, 2013, 04:05:28 PM

Does anyone know how to change the pool management strategy on these? They seem to switch pools somewhat randomly

What firmware version are you using ? Some versions didn't have very good pool management. Latest version (0.1.10) works a lot better.

Foofighter

hero member

Activity: 882

Merit: 547

BTC Mining Hardware, Trading and more

Quote from: warhawk187 on November 29, 2013, 04:05:28 PM

Does anyone know how to change the pool management strategy on these? They seem to switch pools somewhat randomly and there is no real interface to control them besides the web one that just has firmware flash and pool info. Also, is anyone actually getting 40Gh/s on these??

sure getting the 40GH, why use more then 1 pool?

warhawk187

sr. member

Activity: 327

Merit: 250

Does anyone know how to change the pool management strategy on these? They seem to switch pools somewhat randomly and there is no real interface to control them besides the web one that just has firmware flash and pool info. Also, is anyone actually getting 40Gh/s on these??

vulgartrendkill

hero member

Activity: 518

Merit: 500

it was approximately a month between technobit saying it was dispatched and it actually being dispatched. It was in testing for about a week.

Topic: TECHNOBIT S-HASH minig board and Bitfury - page 8. (Read 46672 times)