The Official X11 Thread (updated daily)(Now with increased MH) - page 3.

trademark

legendary

Activity: 1932

Merit: 1003

Quote from: memcoms on May 10, 2014, 05:11:38 PM

Cool informative thread. Please add dreamcoin to the list https://bitcointalksearch.org/topic/ann-dreamcoin-drm-x11-powpos-poloniex-bittrex-15-pos-599854 Also, you can remove electronic yen, don't think the coin will ever launch.

Why didn't you just quote my message instead of copying it?

drmmers

newbie

Activity: 17

Merit: 0

Added conspiracy coin

memcoms

newbie

Activity: 24

Merit: 0

Cool informative thread. Please add dreamcoin to the list https://bitcointalksearch.org/topic/ann-dreamcoin-drm-x11-powpos-poloniex-bittrex-15-pos-599854 Also, you can remove electronic yen, don't think the coin will ever launch.

CoinBuzz

sr. member

Activity: 490

Merit: 250

I Still cant get more than 1.4Mhash from my r9 280x sapphire card.

It has to be something wrong!

bbr

sr. member

Activity: 290

Merit: 250

-I 13 -g 2 --thread-concurrency 8191 --lookup-gap 2 --gpu-engine 1052 --gpu-memclock 1500 -w 256 --gpu-powertune -20

Gigabyte 280x & Sapphire 7970 Dual-X both getting 2.1 MH with the above with voltage set in the BIOS on both at 1.085

goodluck0319

sr. member

Activity: 420

Merit: 250

what is a good xI for 290 non x and 270x?

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: CoinBuzz on May 09, 2014, 08:47:33 AM

Guys,

I cant get more than 1.4Mhash from my R9 280X sapphire, what is wrong with it? I tested all the setting combinations but it cannot go beyond 1.4Mhash

I have the sapphire 7970 dual X which is similar to the R9 280X.

I use: xIntensity 4, thread-currency = 8192, Gpu-threads = 2. Vcore = 0.94v V, core/memory = 840/1000MHz, the hash rate is 1.65 MH/s. I used the lower setting to have high energy efficiency as my electricity cost is high.

dingyuanchang

full member

Activity: 308

Merit: 100

Added conspiracy coin

CoinBuzz

sr. member

Activity: 490

Merit: 250

Guys,

I cant get more than 1.4Mhash from my R9 280X sapphire, what is wrong with it? I tested all the setting combinations but it cannot go beyond 1.4Mhash

trademark

legendary

Activity: 1932

Merit: 1003

Cool informative thread. Please add dreamcoin to the list https://bitcointalksearch.org/topic/ann-dreamcoin-drm-x11-powpos-poloniex-bittrex-15-pos-599854 Also, you can remove electronic yen, don't think the coin will ever launch.

PeaMine

hero member

Activity: 979

Merit: 510

Anyone have a working CPU miner for X11?
It's suppose to be quite efficient, but none of them work for me.
My Scrypt minerd/cpuminers work fine, but the ones from Darkcoin for example, do not fully work. They crash shortly after starting the threads up.
I'm using -a X11 which it reports is fine before it crashes.

PHCoin

member

Activity: 70

Merit: 10

Quote from: jedimindtriks on May 07, 2014, 02:05:12 PM

Quote from: Wolffish on May 05, 2014, 05:30:56 AM

Nice to see X11 thread here!

Can someone point me where I can find good X11 conf to my rig:
Gigabyte R9 280x rev 2.0 (GV-R928XOC-3GD-GA)
Gigabyte HD 7950 rev 2.0 (GV-R795WF3-3GD)

280x should run on 2 threads with no problems, but what about 7950? Do I need to make it run on 1 thread or can it handle 2 threads too?

Thanks

Im not sure about 7950, but any normal scrypt settings work fine with x11.
for 280x, look at the main thread.

Quote from: PHCoin on May 05, 2014, 12:55:48 PM

Any x11 official supported pools? PHCoin is launching X11 and want to see some compatible X11 pools

List them here

pools for a specific coin can be found in their ANN threads. no need to clutter this thread with it. all i do is list multipools and auto switch pools.

EDIT* Added PHcoin to the list

thanks for adding and good idea to keep this directly x11 relevant.

jedimindtriks

member

Activity: 136

Merit: 10

Quote from: Wolffish on May 05, 2014, 05:30:56 AM

Nice to see X11 thread here!

Can someone point me where I can find good X11 conf to my rig:
Gigabyte R9 280x rev 2.0 (GV-R928XOC-3GD-GA)
Gigabyte HD 7950 rev 2.0 (GV-R795WF3-3GD)

280x should run on 2 threads with no problems, but what about 7950? Do I need to make it run on 1 thread or can it handle 2 threads too?

Thanks

Im not sure about 7950, but any normal scrypt settings work fine with x11.
for 280x, look at the main thread.

Quote from: PHCoin on May 05, 2014, 12:55:48 PM

Any x11 official supported pools? PHCoin is launching X11 and want to see some compatible X11 pools

List them here

pools for a specific coin can be found in their ANN threads. no need to clutter this thread with it. all i do is list multipools and auto switch pools.

EDIT* Added PHcoin to the list

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: Wolffish on May 05, 2014, 05:30:56 AM

Nice to see X11 thread here!

Can someone point me where I can find good X11 conf to my rig:
Gigabyte R9 280x rev 2.0 (GV-R928XOC-3GD-GA)
Gigabyte HD 7950 rev 2.0 (GV-R795WF3-3GD)

280x should run on 2 threads with no problems, but what about 7950? Do I need to make it run on 1 thread or can it handle 2 threads too?

Thanks

For 7950, I run: TC = 24000, gpu-threads = 1, intensity = 18.
For 280X, I run: TC = 8192, gpu-threads = 2, intensity = 13.

PHCoin

member

Activity: 70

Merit: 10

Any x11 official supported pools? PHCoin is launching X11 and want to see some compatible X11 pools

List them here

Wolffish

full member

Activity: 152

Merit: 100

Nice to see X11 thread here!

Can someone point me where I can find good X11 conf to my rig:
Gigabyte R9 280x rev 2.0 (GV-R928XOC-3GD-GA)
Gigabyte HD 7950 rev 2.0 (GV-R795WF3-3GD)

280x should run on 2 threads with no problems, but what about 7950? Do I need to make it run on 1 thread or can it handle 2 threads too?

Thanks

Carlitos714

full member

Activity: 140

Merit: 100

love x11

running 4 x 7970's @ 1050/1450 1.013v pulling 588 watts

i7-3820 @ 1.6 ghz, 2 water pumps and 8 high speed fans, two fan controllers.

PHCoin

member

Activity: 70

Merit: 10

Quote from: PHCoin on May 03, 2014, 02:24:42 AM

X11 drew our attention due to some requests from the PH community. I'll follow this and hope to implement on our coin so its listed here.

PHCoin is about to launch x11 on its first day of wallet release .. This coming Thursday

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: coin123123 on May 04, 2014, 12:05:15 PM

x11 really worth mining?

calculated all x11 coins btc/mh/day and they are not so profitable even they consume half electricity

bdg   0.00486396
give   0.00363970
dark   0.00330847
hifive0.00313711
logi   0.00269571
jug   0.00223223
hash   0.00218658
qbc   0.00215038
lim   0.00169552
mun   0.00162767
hiro   0.00136401
lire   0.00086283
gdn   0.00080730

you know that 1 mh/s in scrypt is 3 mh/s in x11, so 0.004 for only 1 mh/s x11 is pretty good lol

but perhaps you mean 1 mh/s in scrypt, so 3 mh/s with x11

goodluck0319

sr. member

Activity: 420

Merit: 250

right now I am mining trademybit x11 pool. my house is 90 degrees in the room that I put the rig and all 4 gpus is 70-75 stable at least so far.

so far it is good for me. without worrying 85-90 degree gpu to be burn up. :?

Topic: The Official X11 Thread (updated daily)(Now with increased MH) - page 3. (Read 17175 times)