TT-Miner 2022.4.1 KAWPOW, PROGPOW, ETHASH, ETCHASH, EPIC, SHA512256D, GHOSTRIDER - page 39.

platinum4

sr. member

Activity: 547

Merit: 250

2.2.2b2 does not honor -gs, adding -gs #### doesn't work just runs as default

artful

newbie

Activity: 59

Merit: 0

where link to linux version ?

dkmontague

newbie

Activity: 51

Merit: 0

Quote from: hogwash.89m on April 14, 2019, 11:33:07 AM

Quote from: dkmontague on April 13, 2019, 11:09:25 PM

Quote from: hogwash.89m on April 13, 2019, 11:34:09 AM

Quote from: Shaddyr on April 13, 2019, 10:08:39 AM

because PM works once in a day have to write answer here: looks like beta2-version fixed connections bug for me. But miner doesn't pausing process while no connect.

Yes, it pause the mining and then when connection is restored it continues mining (on failover pool if at the moment try connect to it)

1. normal mining power consumption (954 W)
2. cable (connection lost) power consumption (311 W) after around ~1 minute (miner don't suspend mining at the moment when connection is lost, which is OK)
3. message in miner, after LAN cable is pluged back mining resumes on retrying pool (cloud be failover one)

https://imgur.com/a/QMdSZrn

Off topic, but what is the power-monitoring device you have plugged in in your last picture in your link?

@dkmontague you asked about power monitoring device.
In last picture it's just desktop with TT-Miner and Afterburner (Watts in TT-Miner are readings from Nvidia NVLM API, software reading).

And device in power outlet is I think this one, EU socket type:

https://www.aliexpress.com/item/230V-50Hz-Power-Meter-Energy-Monitor-EU-Watt-Volt-Amp-Frequency-Monitor-Analyzer-Cumulative-Kilowatt-Hour/32817695107.html

(PS: I think it can be found cheaper on other shops)

Or this one US plug type:

https://www.amazon.com/FLOUREON-Electricity-Monitor-Voltage-Measuring/dp/B07B3VQBZH

All the best,

Thanks brother!

hogwash.89m

newbie

Activity: 32

Merit: 0

Quote from: dkmontague on April 13, 2019, 11:09:25 PM

Quote from: hogwash.89m on April 13, 2019, 11:34:09 AM

Quote from: Shaddyr on April 13, 2019, 10:08:39 AM

because PM works once in a day have to write answer here: looks like beta2-version fixed connections bug for me. But miner doesn't pausing process while no connect.

Yes, it pause the mining and then when connection is restored it continues mining (on failover pool if at the moment try connect to it)

1. normal mining power consumption (954 W)
2. cable (connection lost) power consumption (311 W) after around ~1 minute (miner don't suspend mining at the moment when connection is lost, which is OK)
3. message in miner, after LAN cable is pluged back mining resumes on retrying pool (cloud be failover one)

https://imgur.com/a/QMdSZrn

Off topic, but what is the power-monitoring device you have plugged in in your last picture in your link?

@dkmontague you asked about power monitoring device.
In last picture it's just desktop with TT-Miner and Afterburner (Watts in TT-Miner are readings from Nvidia NVLM API, software reading).

And device in power outlet is I think this one, EU socket type:

https://www.aliexpress.com/item/230V-50Hz-Power-Meter-Energy-Monitor-EU-Watt-Volt-Amp-Frequency-Monitor-Analyzer-Cumulative-Kilowatt-Hour/32817695107.html

(PS: I think it can be found cheaper on other shops)

Or this one US plug type:

https://www.amazon.com/FLOUREON-Electricity-Monitor-Voltage-Measuring/dp/B07B3VQBZH

All the best,

somaton

jr. member

Activity: 212

Merit: 6

Ok, will try and report back when it is released. One more request: is it possible to show real, human readable block number + block difficulty (something like t-rex: x21s block 194268, diff 281.436)? It will be very usefull to know for example which coin/block is mining right now, because something like this "received new job 10d5e" is just plain useless, with no real info. Thanks for your work!

TrailingStop

member

Activity: 566

Merit: 16

Quote from: somaton on April 14, 2019, 08:45:50 AM

still using 2.1.19 because it gives better speeds compared to latest final version with progpow.

I will release later today a new version - please try this - I made some improvements for ProgPoW.

somaton

jr. member

Activity: 212

Merit: 6

still using 2.1.19 because it gives better speeds compared to latest final version with progpow.

TrailingStop

member

Activity: 566

Merit: 16

Quote from: dkmontague on April 14, 2019, 04:05:05 AM

Any MTP speed increase with 2.2.2 beta?

please wait for release - then you should see some performance increments. Not in the 2.2.2 beta, this is for connection-bug fixing.

dkmontague

newbie

Activity: 51

Merit: 0

Any MTP speed increase with 2.2.2 beta?

TrailingStop

member

Activity: 566

Merit: 16

Quote from: Brzina on April 14, 2019, 03:11:13 AM

It works perfectly with 7 cards, but when 8th card is enabled, it crashes. Swap file is 98gb

Hi,

can you please check if it is one certain card or if it is just the fact of the 8th card?

Try with the command line option -d:

start with -d 0 1 2 3 4 5 6
then -d 1 2 3 4 5 6 7

If both work then it is the fact of the 8th card, otherwise it is in this sample card #7 that causes the problems.

Please let me know.
Thanks.

Brzina

member

Activity: 74

Merit: 20

It works perfectly with 7 cards, but when 8th card is enabled, it crashes. Swap file is 98gb

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: Brzina on April 13, 2019, 03:15:19 PM

Quote from: TrailingStop on April 13, 2019, 12:58:59 PM

Quote from: hogwash.89m on April 13, 2019, 11:47:33 AM

@TrailingStop Hi,

One of my friend has a problem with TT-Miner 2.2.2 beta2, he doesn't try older versions but probably problem is also on every version.

He is getting error when trying to mine MTP with 8 Nvidia cards, default -intensity 15.
We didn't find limit for number of GPUs in README guide.

OS: Win 10
Driver: 419.67
RAM: 4 GB
Virtual Mem.: 99 GB
GPUs:
6 x 1070 8GB
2 x 1070ti 8GB

Running with -a MTP-101

Quote

CudaError: 2
Not enough memory to run algo. GPU disabled.(0/1)
Plese check if your Virtual Memory settings....

https://cdn.discordapp.com/attachments/379391607406985218/566651306886955008/unknown.png

And these are settings for Virtual Memory (Initial size: 99000 MB, Maximum size 99000 MB, Currently allcated: 99000 MB
https://cdn.discordapp.com/attachments/379391607406985218/566652780631293992/unknown.png

Thx. for support.

Hi,

there is no static limitation in the miner - from that point of view it should work with 8 GPUs. Can you please try with a lower intensity? In the beta you check the 'auto optimize' function is active if you do not add -i or -gs to the command line. It might be that I use too high values for optimization in this beta. So please try with -i 14 - just to see if that works better.

Please let me know - I will take a deeper look into it.

Thanks.

Hi, I'm a friend of Hogh with 8 gpus on one rig (6x 1070 & 2x1070TI)

It does not work with -i 14 also Miner crashes with "no memory" warning

That is because you have mixed Video Cards ...

1070 is only capable of a lesser intensity than the 1070TI, whichmeans you may have to assign them individually. We used to have this same issues in our miners until we made ALL cards exactly the same. Much smoother that way, but of course not always possible.

#crysx

abudfv2008

full member

Activity: 728

Merit: 106

Quote from: Brzina on April 13, 2019, 03:15:19 PM

Quote from: TrailingStop on April 13, 2019, 12:58:59 PM

Quote from: hogwash.89m on April 13, 2019, 11:47:33 AM

@TrailingStop Hi,

One of my friend has a problem with TT-Miner 2.2.2 beta2, he doesn't try older versions but probably problem is also on every version.

He is getting error when trying to mine MTP with 8 Nvidia cards, default -intensity 15.
We didn't find limit for number of GPUs in README guide.

OS: Win 10
Driver: 419.67
RAM: 4 GB
Virtual Mem.: 99 GB
GPUs:
6 x 1070 8GB
2 x 1070ti 8GB

Running with -a MTP-101

Quote

CudaError: 2
Not enough memory to run algo. GPU disabled.(0/1)
Plese check if your Virtual Memory settings....

https://cdn.discordapp.com/attachments/379391607406985218/566651306886955008/unknown.png

And these are settings for Virtual Memory (Initial size: 99000 MB, Maximum size 99000 MB, Currently allcated: 99000 MB
https://cdn.discordapp.com/attachments/379391607406985218/566652780631293992/unknown.png

Thx. for support.

Hi,

there is no static limitation in the miner - from that point of view it should work with 8 GPUs. Can you please try with a lower intensity? In the beta you check the 'auto optimize' function is active if you do not add -i or -gs to the command line. It might be that I use too high values for optimization in this beta. So please try with -i 14 - just to see if that works better.

Please let me know - I will take a deeper look into it.

Thanks.

Hi, I'm a friend of Hogh with 8 gpus on one rig (6x 1070 & 2x1070TI)

It does not work with -i 14 also Miner crashes with "no memory" warning

The problem is in nvidia driver. Some drivers allow -i 21 other can't run even with -i 15.

dkmontague

newbie

Activity: 51

Merit: 0

Quote from: hogwash.89m on April 13, 2019, 11:34:09 AM

Quote from: Shaddyr on April 13, 2019, 10:08:39 AM

because PM works once in a day have to write answer here: looks like beta2-version fixed connections bug for me. But miner doesn't pausing process while no connect.

Yes, it pause the mining and then when connection is restored it continues mining (on failover pool if at the moment try connect to it)

1. normal mining power consumption (954 W)
2. cable (connection lost) power consumption (311 W) after around ~1 minute (miner don't suspend mining at the moment when connection is lost, which is OK)
3. message in miner, after LAN cable is pluged back mining resumes on retrying pool (cloud be failover one)

https://imgur.com/a/QMdSZrn

Off topic, but what is the power-monitoring device you have plugged in in your last picture in your link?

Brzina

member

Activity: 74

Merit: 20

Quote from: TrailingStop on April 13, 2019, 12:58:59 PM

Quote from: hogwash.89m on April 13, 2019, 11:47:33 AM

@TrailingStop Hi,

One of my friend has a problem with TT-Miner 2.2.2 beta2, he doesn't try older versions but probably problem is also on every version.

He is getting error when trying to mine MTP with 8 Nvidia cards, default -intensity 15.
We didn't find limit for number of GPUs in README guide.

OS: Win 10
Driver: 419.67
RAM: 4 GB
Virtual Mem.: 99 GB
GPUs:
6 x 1070 8GB
2 x 1070ti 8GB

Running with -a MTP-101

Quote

CudaError: 2
Not enough memory to run algo. GPU disabled.(0/1)
Plese check if your Virtual Memory settings....

https://cdn.discordapp.com/attachments/379391607406985218/566651306886955008/unknown.png

And these are settings for Virtual Memory (Initial size: 99000 MB, Maximum size 99000 MB, Currently allcated: 99000 MB
https://cdn.discordapp.com/attachments/379391607406985218/566652780631293992/unknown.png

Thx. for support.

Hi,

there is no static limitation in the miner - from that point of view it should work with 8 GPUs. Can you please try with a lower intensity? In the beta you check the 'auto optimize' function is active if you do not add -i or -gs to the command line. It might be that I use too high values for optimization in this beta. So please try with -i 14 - just to see if that works better.

Please let me know - I will take a deeper look into it.

Thanks.

Hi, I'm a friend of Hogh with 8 gpus on one rig (6x 1070 & 2x1070TI)

It does not work with -i 14 also Miner crashes with "no memory" warning

TrailingStop

member

Activity: 566

Merit: 16

Quote from: hogwash.89m on April 13, 2019, 11:47:33 AM

@TrailingStop Hi,

One of my friend has a problem with TT-Miner 2.2.2 beta2, he doesn't try older versions but probably problem is also on every version.

He is getting error when trying to mine MTP with 8 Nvidia cards, default -intensity 15.
We didn't find limit for number of GPUs in README guide.

OS: Win 10
Driver: 419.67
RAM: 4 GB
Virtual Mem.: 99 GB
GPUs:
6 x 1070 8GB
2 x 1070ti 8GB

Running with -a MTP-101

Quote

CudaError: 2
Not enough memory to run algo. GPU disabled.(0/1)
Plese check if your Virtual Memory settings....

https://cdn.discordapp.com/attachments/379391607406985218/566651306886955008/unknown.png

And these are settings for Virtual Memory (Initial size: 99000 MB, Maximum size 99000 MB, Currently allcated: 99000 MB
https://cdn.discordapp.com/attachments/379391607406985218/566652780631293992/unknown.png

Thx. for support.

Hi,

there is no static limitation in the miner - from that point of view it should work with 8 GPUs. Can you please try with a lower intensity? In the beta you check the 'auto optimize' function is active if you do not add -i or -gs to the command line. It might be that I use too high values for optimization in this beta. So please try with -i 14 - just to see if that works better.

Please let me know - I will take a deeper look into it.

Thanks.

TrailingStop

member

Activity: 566

Merit: 16

Quote from: hogwash.89m on April 13, 2019, 11:34:09 AM

Quote from: Shaddyr on April 13, 2019, 10:08:39 AM

because PM works once in a day have to write answer here: looks like beta2-version fixed connections bug for me. But miner doesn't pausing process while no connect.

Yes, it pause the mining and then when connection is restored it continues mining (on failover pool if at the moment try connect to it)

1. normal mining power consumption (954 W)
2. cable (connection lost) power consumption (311 W) after around ~1 minute (miner don't suspend mining at the moment when connection is lost, which is OK)
3. message in miner, after LAN cable is pluged back mining resumes on retrying pool (cloud be failover one)

https://imgur.com/a/QMdSZrn

Hi, yes this is how it is supposed to work.

TrailingStop

member

Activity: 566

Merit: 16

Quote from: Shaddyr on April 13, 2019, 10:08:39 AM

because PM works once in a day have to write answer here: looks like beta2-version fixed connections bug for me. But miner doesn't pausing process while no connect.

Hi,

it takes some time until the miner gets its timeout notification from the system. If you see a notification on the screen that the connection is lost TT suspends mining, but continues to connect to the pool. If you add a failover pool TT will switch to this after some tries. I will try to reduce the time until mining is suspended.

Thanks for testing.

hogwash.89m

newbie

Activity: 32

Merit: 0

@TrailingStop Hi,

One of my friend has a problem with TT-Miner 2.2.2 beta2, he doesn't try older versions but probably problem is also on every version.

He is getting error when trying to mine MTP with 8 Nvidia cards, default -intensity 15.
We didn't find limit for number of GPUs in README guide.

OS: Win 10
Driver: 419.67
RAM: 4 GB
Virtual Mem.: 99 GB
GPUs:
6 x 1070 8GB
2 x 1070ti 8GB

Running with -a MTP-101

Quote

CudaError: 2
Not enough memory to run algo. GPU disabled.(0/1)
Plese check if your Virtual Memory settings....

https://cdn.discordapp.com/attachments/379391607406985218/566651306886955008/unknown.png

And these are settings for Virtual Memory (Initial size: 99000 MB, Maximum size 99000 MB, Currently allcated: 99000 MB
https://cdn.discordapp.com/attachments/379391607406985218/566652780631293992/unknown.png

Thx. for support.

hogwash.89m

newbie

Activity: 32

Merit: 0

Quote from: Shaddyr on April 13, 2019, 10:08:39 AM

because PM works once in a day have to write answer here: looks like beta2-version fixed connections bug for me. But miner doesn't pausing process while no connect.

Yes, it pause the mining and then when connection is restored it continues mining (on failover pool if at the moment try connect to it)

1. normal mining power consumption (954 W)
2. cable (connection lost) power consumption (311 W) after around ~1 minute (miner don't suspend mining at the moment when connection is lost, which is OK)
3. message in miner, after LAN cable is pluged back mining resumes on retrying pool (cloud be failover one)

https://imgur.com/a/QMdSZrn

Topic: TT-Miner 2022.4.1 KAWPOW, PROGPOW, ETHASH, ETCHASH, EPIC, SHA512256D, GHOSTRIDER - page 39. (Read 132259 times)