Author

Topic: [TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH - page 147. (Read 317998 times)

sr. member
Activity: 476
Merit: 250
ascending volume but prices declined . Let transfercoin go to 1000 satoshi.

Then we build a good site and make some good PR.

I can built a mobile wallet.
full member
Activity: 210
Merit: 100
I have issues with the android app: it appears very slow I have a galaxy mini 2, my phone is too old maybe? Sad
legendary
Activity: 952
Merit: 1000
Gentlemen, do not give out your wallet address in a thread - it is forbidden for several months !

It is this thread can be blocked by the moderator.



This is true please PM infernoman your addresses and he will get you paid.  Please delete the posts so we do not get this thread banned.
full member
Activity: 224
Merit: 100
Gentlemen, do not give out your wallet address in a thread - it is forbidden for several months !

It is this thread can be blocked by the moderator.

hero member
Activity: 644
Merit: 500
Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0
Already done all this but no good.

Can you give some details?

Windows OS Version
32 or 64 bit
anything else that may help?
Windows 8.1 64 bit.I have over 1000+ wallets synced which run fine.I will post what error says when i get home from work
legendary
Activity: 952
Merit: 1000
Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0
Already done all this but no good.

Can you give some details?

Windows OS Version
32 or 64 bit
anything else that may help?
hero member
Activity: 644
Merit: 500
Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0
Already done all this but no good.
legendary
Activity: 952
Merit: 1000
Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0
hero member
Activity: 644
Merit: 500
Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all
sr. member
Activity: 422
Merit: 250
Meow
Had the same Problem with the qt-version. Die you get connections without adding nodes manually?

I am using addnodes in my transfer.conf. You can try these (got most of these from WigitGetIt earlier in this thread):

Code:
addnode=104.236.89.11:7777
addnode=104.236.89.11:7778
addnode=54.187.214.128:7778
addnode=118.90.0.123
addnode=176.205.241.159
addnode=198.27.97.172
addnode=198.50.243.89
addnode=198.50.243.90
addnode=213.108.119.84
addnode=37.138.174.29
addnode=5.9.36.211
addnode=54.165.194.201
addnode=70.123.150.214
addnode=72.235.23.10
addnode=72.74.26.161
addnode=83.157.62.179
addnode=86.5.28.9
addnode=90.194.88.36
addnode=91.96.63.247
addnode=92.97.134.32
addnode=99.236.174.184
addnode=99.236.215.227

Good luck!
legendary
Activity: 952
Merit: 1000
I do not see any transfercoin giveaway here?

Because the giveaways have been completed.  I am planning another one to coincide with the fork and wallet release.
legendary
Activity: 957
Merit: 1006
When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:
************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?

Check to make sure its created a data folder named ".transfer" if it has, then i'm going to guess the last time you can the client was using sudo or root. and trying to start the file without sudo or root, after you've already used it will result in an error.

Try using "sudo transferd"

Hi thanks for the tips - I actually wasn't using sudo / root, but I did have a .transfer folder with the old data files; I just needed to delete everything except wallet.dat and transfer.conf, and now it's running and synching. Thanks again!

Had the same Problem with the qt-version. Die you get connections without adding nodes manually?
hero member
Activity: 966
Merit: 500
There are many individuals buying up TX from the weak hands.  Get ready for bright future for TX
sr. member
Activity: 422
Merit: 250
Meow
When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:
************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?

Check to make sure its created a data folder named ".transfer" if it has, then i'm going to guess the last time you can the client was using sudo or root. and trying to start the file without sudo or root, after you've already used it will result in an error.

Try using "sudo transferd"

Hi thanks for the tips - I actually wasn't using sudo / root, but I did have a .transfer folder with the old data files; I just needed to delete everything except wallet.dat and transfer.conf, and now it's running and synching. Thanks again!
legendary
Activity: 964
Merit: 1000
When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:
************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?

Check to make sure its created a data folder named ".transfer" if it has, then i'm going to guess the last time you can the client was using sudo or root. and trying to start the file without sudo or root, after you've already used it will result in an error.

Try using "sudo transferd"
sr. member
Activity: 422
Merit: 250
Meow
When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:
************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?
Jump to: