Pages:
Author

Topic: [TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH - page 32. (Read 317998 times)

full member
Activity: 252
Merit: 100
Aliens are real!
what is the total supply of tx? and why this coin can not reach Dash's price?    Shocked
full member
Activity: 154
Merit: 100
transfercoin looks great and is very undervalued in my opinion. By the way, is it possible to run more than one masternode under the same IP? So like running two masternodes on my local dedicated node computer ?
Your question is answered by the DEV himself:

The block explorer as well as everyones wallet, who has not updated should show "Please update to Client version 1.2.4. https://github.com/transferdev/Transfercoin/releases/tag/1.2.4"
I pushed an alert to the rest of the network to update. after a week ill send an alert which will put version 61402 wallets in safe mode.

https://chainz.cryptoid.info/tx/


Also, I setup a DNS node, and included it with the new wallet release, Cutoff IPv6 masternodes, and you can no longer run more than 1 masternode per IP. You have to use port 17170 with a valid IPV4 address.

1 masternode per IP.


Where can I find the latest wallet for the Raspberry?

We are getting that done ASAP, keep an eye on this thread for the link drop.

I could also use a makefile for raspi3 or a compiled binary as my old wallet stopped working...

I can't setup my masternode right now.. Staking works but a new rasp wallet woule be nice :-)
newbie
Activity: 46
Merit: 0
transfercoin looks great and is very undervalued in my opinion. By the way, is it possible to run more than one masternode under the same IP? So like running two masternodes on my local dedicated node computer ?
Your question is answered by the DEV himself:

The block explorer as well as everyones wallet, who has not updated should show "Please update to Client version 1.2.4. https://github.com/transferdev/Transfercoin/releases/tag/1.2.4"
I pushed an alert to the rest of the network to update. after a week ill send an alert which will put version 61402 wallets in safe mode.

https://chainz.cryptoid.info/tx/


Also, I setup a DNS node, and included it with the new wallet release, Cutoff IPv6 masternodes, and you can no longer run more than 1 masternode per IP. You have to use port 17170 with a valid IPV4 address.

1 masternode per IP.


Where can I find the latest wallet for the Raspberry?

We are getting that done ASAP, keep an eye on this thread for the link drop.

I could also use a makefile for raspi3 or a compiled binary as my old wallet stopped working...
hero member
Activity: 594
Merit: 500
Blockchain entrepreneur✔
We really need to find a faster way to sync the client. Its been around 24 hrs here and I still dont have all the blocks downloaded. In some places it will go really quickly but others stall for hours.

Confirm,  i have the same problem on 2 of my fresh new nodes. Slow Slow Slow sync....

I got 25+ connected peers and stil slow slow slow.

I use the .4 version.
sr. member
Activity: 302
Merit: 250
In the debug window for Transfercoin, using Ctrl-L does not clear the command history like it should, which poses a security risk for local masternodes. Does anyone else have this problem? I tried it on 2 computers.

I have already put it in the issues list on github.

https://github.com/transferdev/Transfercoin/issues

it will be on the list to fix when the dev can get to it.
member
Activity: 105
Merit: 10
In the debug window for Transfercoin, using Ctrl-L does not clear the command history like it should, which poses a security risk for local masternodes. Does anyone else have this problem? I tried it on 2 computers.
member
Activity: 97
Merit: 10
If you want to keep your coins offline you can use a Controller and Remote setup. I made this to help new users. https://youtu.be/On3vYfVqXKc
newbie
Activity: 46
Merit: 0
Trying to set up the remote wallet on Linux to make a guide, but i'm stuck at the last step. On my local wallet i have the message : Not in the masternode list
And when trying to start the remote i get the message : Error could not allocate vin

Any idea why ?

Well got the answer... should have unlock first Smiley

edit again : and already staking Cheesy
newbie
Activity: 46
Merit: 0
For installation in Linux, here is what i did on a fresh VPS install :
    1  apt-get update y
    2  apt-get update -y
    3  apt-get upgrade -y
    4  apt-get dist-upgrade -y
    5  apt-get install build-essential libssl-dev libboost-all-dev libdb5.1 libd                                                                                                                                                             b5.1-dev libdb5.1++-dev libtool
    6  apt-get install git ntp make g++ gcc autoconf cpp ngrep iftop sysstat aut                                                                                                                                                             otools-dev pkg-config
    7  sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qtt                                                                                                                                                             ools5-dev-tools libprotobuf-dev protobuf-compiler libqrencode-dev
    8  git clone  https://github.com/transferdev/Transfercoin.git
   11  cd Transfercoin/src
   15  sudo apt-get remove qt3-dev-tools libqt3-mt-dev
   16  sudo apt-get install libqt4-dev libminiupnpc-dev
   18  apt-get install libmpc-dev
   20  sudo make -f makefile.unix # Headless transfer
   21  strip transferd
   22  sudo cp transferd /usr/local/bin
   24  ./transferd
 

That should get you a running wallet, after you can follow the windows procedure to just edit the .conf file.
full member
Activity: 221
Merit: 100
great work dev!! can feel the momentum building Smiley
sr. member
Activity: 302
Merit: 250
We really need to find a faster way to sync the client. Its been around 24 hrs here and I still dont have all the blocks downloaded. In some places it will go really quickly but others stall for hours.

try this

in your %appdata%/transfer.conf

add a line

Code:
maxorphanblocks=10000

the restart your client..it may speed it up a little...but after a bit it may slow down again...i recommend restarting the client when it feels too slow again.
it 'usually' downloads fast then slowly slugs.  maybe we can use that information to debug down the road.
member
Activity: 97
Merit: 10
We really need to find a faster way to sync the client. Its been around 24 hrs here and I still dont have all the blocks downloaded. In some places it will go really quickly but others stall for hours.


Download this https://s3-ap-southeast-2.amazonaws.com/transfercoin/Transfer.rar and replace the ones in your C:\Users\xxxxx\AppData\Roaming\Transfer it will save a ton of time

I appreciate the link, is there a place where it is posted so I know it isnt malicious ? I realy appreciate it but I always gotta be safe in crypto


well i made this video and the same link is in one of the comments i provided and i am in the slack all day so up to you mate:) https://www.youtube.com/watch?v=2BMCbYJHB88
sr. member
Activity: 378
Merit: 250
We really need to find a faster way to sync the client. Its been around 24 hrs here and I still dont have all the blocks downloaded. In some places it will go really quickly but others stall for hours.


Download this https://s3-ap-southeast-2.amazonaws.com/transfercoin/Transfer.rar and replace the ones in your C:\Users\xxxxx\AppData\Roaming\Transfer it will save a ton of time

I appreciate the link, is there a place where it is posted so I know it isnt malicious ? I realy appreciate it but I always gotta be safe in crypto
member
Activity: 97
Merit: 10
We really need to find a faster way to sync the client. Its been around 24 hrs here and I still dont have all the blocks downloaded. In some places it will go really quickly but others stall for hours.


Download this https://s3-ap-southeast-2.amazonaws.com/transfercoin/Transfer.rar and replace the ones in your C:\Users\xxxxx\AppData\Roaming\Transfer it will save a ton of time
sr. member
Activity: 378
Merit: 250
We really need to find a faster way to sync the client. Its been around 24 hrs here and I still dont have all the blocks downloaded. In some places it will go really quickly but others stall for hours.
member
Activity: 97
Merit: 10
Where can I find the latest wallet for the Raspberry?

We are getting that done ASAP, keep an eye on this thread for the link drop.
[/quote]

Anyway we could also get a working Linux wallet with a walk though on how to setup a Linux masternode, that would be great thanks.
[/quote]


Yes that also will be coming. I have done the windows local version Video Tutorial. I am now on the Controller windows video. I will be making video tutorials for every method available when all the new installers are available Smiley
member
Activity: 119
Merit: 10
Where can I find the latest wallet for the Raspberry?
[/quote]

We are getting that done ASAP, keep an eye on this thread for the link drop.
[/quote]

Anyway we could also get a working Linux wallet with a walk though on how to setup a Linux masternode, that would be great thanks.
member
Activity: 97
Merit: 10
transfercoin looks great and is very undervalued in my opinion. By the way, is it possible to run more than one masternode under the same IP? So like running two masternodes on my local dedicated node computer ?
Your question is answered by the DEV himself:

The block explorer as well as everyones wallet, who has not updated should show "Please update to Client version 1.2.4. https://github.com/transferdev/Transfercoin/releases/tag/1.2.4"
I pushed an alert to the rest of the network to update. after a week ill send an alert which will put version 61402 wallets in safe mode.

https://chainz.cryptoid.info/tx/


Also, I setup a DNS node, and included it with the new wallet release, Cutoff IPv6 masternodes, and you can no longer run more than 1 masternode per IP. You have to use port 17170 with a valid IPV4 address.

1 masternode per IP.

Where can I find the latest wallet for the Raspberry?

We are getting that done ASAP, keep an eye on this thread for the link drop.
full member
Activity: 154
Merit: 100
transfercoin looks great and is very undervalued in my opinion. By the way, is it possible to run more than one masternode under the same IP? So like running two masternodes on my local dedicated node computer ?
Your question is answered by the DEV himself:

The block explorer as well as everyones wallet, who has not updated should show "Please update to Client version 1.2.4. https://github.com/transferdev/Transfercoin/releases/tag/1.2.4"
I pushed an alert to the rest of the network to update. after a week ill send an alert which will put version 61402 wallets in safe mode.

https://chainz.cryptoid.info/tx/


Also, I setup a DNS node, and included it with the new wallet release, Cutoff IPv6 masternodes, and you can no longer run more than 1 masternode per IP. You have to use port 17170 with a valid IPV4 address.

1 masternode per IP.

Where can I find the latest wallet for the Raspberry?
Pages:
Jump to: