Topic: [UFO] CORE 0.18.0 RELEASED! - page 59. (Read 115188 times)
Now that FTC and UFO are the only neoscrypt coins, do you have any big plans for adoption of either?
very nice coin 
i will start mining this! Lets go!
i will start mining this! Lets go! 
WTF is going on with this damn algo !?
cgminer 3.7.8 crashes whenever I attempt to solo mine UFO.
Yet the "updated" neoS.cl appears to work with cgminger 3.7.7b.. I say "appears" because it failed to register/credit me with that 66.2k block finding share.
Where the hell did my hashpower and the block it found, go ?
cgminer 3.7.8 crashes whenever I attempt to solo mine UFO.
Code:
Faulting application name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Faulting module name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Exception code: 0xc0000005
Fault offset: 0x0000cb1e
Faulting process id: 0x141c
Faulting application start time: 0x01d0038d18aec41f
Faulting application path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Faulting module path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Report Id: 592924e0-6f80-11e4-bc9a-3085a98ead79
Faulting module name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Exception code: 0xc0000005
Fault offset: 0x0000cb1e
Faulting process id: 0x141c
Faulting application start time: 0x01d0038d18aec41f
Faulting application path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Faulting module path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Report Id: 592924e0-6f80-11e4-bc9a-3085a98ead79
Yet the "updated" neoS.cl appears to work with cgminger 3.7.7b.. I say "appears" because it failed to register/credit me with that 66.2k block finding share.
Where the hell did my hashpower and the block it found, go ?
miners works just fine with ufo client and new kernel
what i can tell, u have updated new kernel and 14.xx drivers, so your clock speed is way too high for second gpu, lower it,
or it might be your hardware runs out of memory, (2gb runs just fine)
based on your screen shot, u have not found any block yet
lmao My drivers, (default) clock speeds and system ram have nothing to do with 3.7.8 crashing.
Are you aware that cgminer does not record "best shares" when solo mining unless it is at or above the targeted difficulty ?
A quick search of last night's block history reveals that blocks, 287139 and 287152 both had a difficulty of 1.01xxx and both were found by the same addy. I didn't.. .but BtVnUB163amx2zxyQtJdebLPsdrDKjAVhc DID !
Fyi, my 66.2k share divided by 65536 diff-1 shares = 1.0101318359375.
Block 287139
http://explorer.ufocoin.co:2750/block/102e50ec0a11845b767664f9a612c4ea7310f1ccd3173aefd95776daff1b2105
Block 287152
http://explorer.ufocoin.co:2750/block/484fdff61de0c4fe99bf0722aa9d1e78278dd6af1d98e3b8fb49b888136bd22e
BtVnUB163amx2zxyQtJdebLPsdrDKjAVhc
http://explorer.ufocoin.co:2750/address/BtVnUB163amx2zxyQtJdebLPsdrDKjAVhc
edit
One of those blocks is/was mine !
Solo mining doesnt necessarily produce more coins than pool mining... no need
Thats your "third party intervention" addiction talking.
Solo mining will one day save your centralized crypto fiat luvin ass !
Solo mining doesnt necessarily produce more coins than pool mining... no need
WTF is going on with this damn algo !?
cgminer 3.7.8 crashes whenever I attempt to solo mine UFO.
Yet the "updated" neoS.cl appears to work with cgminger 3.7.7b.. I say "appears" because it failed to register/credit me with that 66.2k block finding share.
Where the hell did my hashpower and the block it found, go ?
cgminer 3.7.8 crashes whenever I attempt to solo mine UFO.
Code:
Faulting application name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Faulting module name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Exception code: 0xc0000005
Fault offset: 0x0000cb1e
Faulting process id: 0x141c
Faulting application start time: 0x01d0038d18aec41f
Faulting application path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Faulting module path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Report Id: 592924e0-6f80-11e4-bc9a-3085a98ead79
Faulting module name: cgminer.exe, version: 0.0.0.0, time stamp: 0x5456b3d7
Exception code: 0xc0000005
Fault offset: 0x0000cb1e
Faulting process id: 0x141c
Faulting application start time: 0x01d0038d18aec41f
Faulting application path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Faulting module path: C:\cgminer-3.7.8-neoscrypt\cgminer.exe
Report Id: 592924e0-6f80-11e4-bc9a-3085a98ead79
Yet the "updated" neoS.cl appears to work with cgminger 3.7.7b.. I say "appears" because it failed to register/credit me with that 66.2k block finding share.
Where the hell did my hashpower and the block it found, go ?
If you downloaded from github before I've posted this message I have discovered I had made a couple of typos in the install script, but they have now been corrected and it all now works. If you have any problems let me know and I will help sort them out
I've finished putting together the script for setting up a full Node on a Raspberry Pi for UFOcoin.
I decided not to include any precompiled filed and have it download the source from Github and compile on the Pi, and once it starts it will download the blockchain which will take up to 20 hours to sync up.
Don't forget to statically assign an IP address to the Pi and open up port 9887 on your router pointing at that IP address.
Open to comments and suggestions.
It's available on Github here
https://github.com/tmuir12/UFO_RaspBerry_Pi_Full_Node
Being on Github and nothing is precompiled and its getting the source from the official Github for UFOcoin its easy to check it is not doing anything other than setting up a UFO node
If you like this I will gladly except donations
UFO address C7NbYUFc5wbQ4crLxf3y4U21qnyPShEE22
Feathercoin Address 6ihSh7xDnnwLJqKVAKZetTqzttxbSrnaLJ
BTC 1BVrSYL1q972Qc6HMXYpWFvLPdCWVjEfcx
I decided not to include any precompiled filed and have it download the source from Github and compile on the Pi, and once it starts it will download the blockchain which will take up to 20 hours to sync up.
Don't forget to statically assign an IP address to the Pi and open up port 9887 on your router pointing at that IP address.
Open to comments and suggestions.
It's available on Github here
https://github.com/tmuir12/UFO_RaspBerry_Pi_Full_Node
Being on Github and nothing is precompiled and its getting the source from the official Github for UFOcoin its easy to check it is not doing anything other than setting up a UFO node
If you like this I will gladly except donations
UFO address C7NbYUFc5wbQ4crLxf3y4U21qnyPShEE22
Feathercoin Address 6ihSh7xDnnwLJqKVAKZetTqzttxbSrnaLJ
BTC 1BVrSYL1q972Qc6HMXYpWFvLPdCWVjEfcx
contact me when you are ready for things (press release, and articles) to get published.
Why do all the pool's/p2pnodes say 0 workers ?
small pools will not stay on the train
that is why people are mining in ufo.nut2pools.com
it still has 15% of network hash
85% of hash is coming out of pools, no one knows where(multipools and lots of solo miners)
ok thanks and ufo.nut2pools.com is down /banned right now ?
no, its working 100% fine
got it thank's
do you have any idea how accurate ufo.nut2pools.com estamated UFO/Day reading is ?
for me, i have got 20-40% more, cant give any promises of that, maybe just lucky days for me(last 24h only like 5-10% more)
thats great thank's...... over or under would do but i'll sure look out for 20-40% over
Why do all the pool's/p2pnodes say 0 workers ?
small pools will not stay on the train
that is why people are mining in ufo.nut2pools.com
it still has 15% of network hash
85% of hash is coming out of pools, no one knows where(multipools and lots of solo miners)
ok thanks and ufo.nut2pools.com is down /banned right now ?
no, its working 100% fine
got it thank's
do you have any idea how accurate ufo.nut2pools.com estamated UFO/Day reading is ?
Why do all the pool's/p2pnodes say 0 workers ?
small pools will not stay on the train
that is why people are mining in ufo.nut2pools.com
it still has 15% of network hash
85% of hash is coming out of pools, no one knows where(multipools and lots of solo miners)
ok thanks and ufo.nut2pools.com is down /banned right now ?
Why do all the pool's/p2pnodes say 0 workers ?
sorry mate... my Spanish is a bit off..
There will be sessions in Spanish so stay tuned
There will be sessions in Spanish so stay tuned
Meet the UFO Team at our live online meet up to discuss our project! It starts 4 pm EST today
http://www.spreecast.com/events/ufo-coin-team-talk--2
http://www.spreecast.com/events/ufo-coin-team-talk--2
podria explicar el video en español??.... la chica es española,,, podria hacer el favor de hablar en esspañol
Devs, you guys need to get in your team talk meeting and talk about the coin!
Meet the UFO Team at our live online meet up to discuss our project! It starts 4 pm EST today
http://www.spreecast.com/events/ufo-coin-team-talk--2
http://www.spreecast.com/events/ufo-coin-team-talk--2
I will be ordering the new A+ boards soon and I will definitely be setting one of these up! Great job coding.
A+ board does not have ethernet, you need a B or B+ board.
I will keep my node running and during the next week will put together two setup scripts. One to install it on the Pi besides Feathercoin and one just for UFO.
What does everyone prefer, to allow the pi itself to compile the code which will take about 4 hours, or to download a pre-compiled ufod, which can have the node up and running in about 25 to 30 minutes?
Please lets have it both ways - precompiled and source for download
Cheers
I will be ordering the new A+ boards soon and I will definitely be setting one of these up! Great job coding.
A+ board does not have ethernet, you need a B or B+ board.
I will keep my node running and during the next week will put together two setup scripts. One to install it on the Pi besides Feathercoin and one just for UFO.
What does everyone prefer, to allow the pi itself to compile the code which will take about 4 hours, or to download a pre-compiled ufod, which can have the node up and running in about 25 to 30 minutes?
I will be ordering the new A+ boards soon and I will definitely be setting one of these up! Great job coding.
Jump to: