Topic: Want to mod MSI RX 470 Armor 8GB OC (Read 7090 times)
Yeah, if I put the stock timings back in - I did mine full-custom.
I have a 470 4G Armor, and it does 30 easily...
I have MSI RX 470 8G Armor w/Hynix memory. All the timings for memory that I've seen have been for Samsung. I was just wondering if anyone has had any luck with a Hynix?
It is easy to mod. Use ati flash and save the rom. Use polaris editor and change memory straps above 1500 to the 1500 settings. Save the modded rom and flash it using ati flash. You should get higher hash rate but the card might be more unstable. You have to play around with it to find the best settings.
I also have the 8GB card with Hynix memory and tried this but it didn't work. I tried copying from 1500 first, then 1625 and 1750. Any ideas?
I have a 470 4G Armor, and it does 30 easily...
I have MSI RX 470 8G Armor w/Hynix memory. All the timings for memory that I've seen have been for Samsung. I was just wondering if anyone has had any luck with a Hynix?
It is easy to mod. Use ati flash and save the rom. Use polaris editor and change memory straps above 1500 to the 1500 settings. Save the modded rom and flash it using ati flash. You should get higher hash rate but the card might be more unstable. You have to play around with it to find the best settings.
I have a 470 4G Armor, and it does 30 easily...
I have MSI RX 470 8G Armor w/Hynix memory. All the timings for memory that I've seen have been for Samsung. I was just wondering if anyone has had any luck with a Hynix?
I have this same card but have Hynix memory. Is strapping the best way to get more MH/s out of this? Currently I'm getting ~20 MH/s with the new AMD Beta Drivers.
What is the roughly coin eth income for mining using this vga in one day.
Would anyone be able to get me Rx470 4gb OC bios mod? Everything I've tried just crashes my cards
Thanks for your mod!! And thanks for sharing your experiences!!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
I dunt use wattool. Only MSI Afterburner and voltage regulator is.locked.
That what im doing till now (with voltage regulator unlocked) always is decrease it. I think that we can squeeze them more increasing memory clock. I think that testing by little steps its not going to die just only get a blue screen. What do you think??
I am happy where it is humming along stable. When I push the memory speed above 2000 it gets unstable. I would rather have it running 24/7 than have stability issues making the rig go down when I am not at home to get it back up and running. Downtime is money wasted. From 1880 to 2000 the difference in speed not worth having problems.
I have exactly the same mods, but i can't get more than 23 MH/s. Every change i make in MSI afterburner has no change on MH, from mem 1400 to 1880, same hashrate. (core from 1050 to 1200, core voltage from -30 to 0). Any idea?
When mining I find that often I have to reboot before the change in MSI Afterburner takes affect. Uses the restore settings upon reboot box in Afterburner then reboot.
Thanks for your mod!! And thanks for sharing your experiences!!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
I dunt use wattool. Only MSI Afterburner and voltage regulator is.locked.
That what im doing till now (with voltage regulator unlocked) always is decrease it. I think that we can squeeze them more increasing memory clock. I think that testing by little steps its not going to die just only get a blue screen. What do you think??
I am happy where it is humming along stable. When I push the memory speed above 2000 it gets unstable. I would rather have it running 24/7 than have stability issues making the rig go down when I am not at home to get it back up and running. Downtime is money wasted. From 1880 to 2000 the difference in speed not worth having problems.
https://image.ibb.co/ejojwQ/speeds_09may17.png
I have exactly the same mods, but i can't get more than 23 MH/s. Every change i make in MSI afterburner has no change on MH, from mem 1400 to 1880, same hashrate. (core from 1050 to 1200, core voltage from -30 to 0). Any idea?
Thanks for your mod!! And thanks for sharing your experiences!!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
I dunt use wattool. Only MSI Afterburner and voltage regulator is.locked.
That what im doing till now (with voltage regulator unlocked) always is decrease it. I think that we can squeeze them more increasing memory clock. I think that testing by little steps its not going to die just only get a blue screen. What do you think??
I am happy where it is humming along stable. When I push the memory speed above 2000 it gets unstable. I would rather have it running 24/7 than have stability issues making the rig go down when I am not at home to get it back up and running. Downtime is money wasted. From 1880 to 2000 the difference in speed not worth having problems.
After my own tests Ill comment to you my conlussions and spreadsheet results
Thanks for your mod!! And thanks for sharing your experiences!!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
I dunt use wattool. Only MSI Afterburner and voltage regulator is.locked.
That what im doing till now (with voltage regulator unlocked) always is decrease it. I think that we can squeeze them more increasing memory clock. I think that testing by little steps its not going to die just only get a blue screen. What do you think??
I am happy where it is humming along stable. When I push the memory speed above 2000 it gets unstable. I would rather have it running 24/7 than have stability issues making the rig go down when I am not at home to get it back up and running. Downtime is money wasted. From 1880 to 2000 the difference in speed not worth having problems.
Thanks for your mod!! And thanks for sharing your experiences!!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
I dunt use wattool. Only MSI Afterburner and voltage regulator is.locked.
That what im doing till now (with voltage regulator unlocked) always is decrease it. I think that we can squeeze them more increasing memory clock. I think that testing by little steps its not going to die just only get a blue screen. What do you think??
Thanks for your mod!! And thanks for sharing your experiences!!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
I dunt use wattool. Only MSI Afterburner and voltage regulator is.locked.
Thanks for your mod!! And thanks for sharing your experiences!!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
After read and research a little bit, Ive seen that some people using samsung rams increase memory clocks more than 1880 (arround 2000), but you have to decrease your coreclock and core voltage too. I think that to get the best performance, we have to use wattool to optimice each step P1-P7 and reduce power and temp.
Later I will try some tests uning a spreadsheet to know wich could be the best settings. Or do you have already tested?
Thanks again!
I am using patched Relive 16.2.1 and my hashrate in dual mining mode averages about 26.5 MH/s. Cryptomined on Youtube has a video on how to install and patch it with links to all the files.
Thanks for us, after work Ill try to patch my drivers like video shows, and post comments.
Do you have a samsung memory right? Have you memory clock more than 1750Mhz??
Have you tried 1750 straps instead of 1500? I have read in some MSI cards with samsung memory got better hashrate using 1625 and 1750 straps but not with MSI Armor version
Million thanks!!
Yes, as I've stated several times already I have Samsung memory and I run my card at 1880 memory speed. The straps are all 1500 straps. It works fine with the correct drivers. The mood I posted if for Samsung memory only.
I am using patched Relive 16.2.1 and my hashrate in dual mining mode averages about 26.5 MH/s. Cryptomined on Youtube has a video on how to install and patch it with links to all the files.
Thanks for us, after work Ill try to patch my drivers like video shows, and post comments.
Do you have a samsung memory right? Have you memory clock more than 1750Mhz??
Have you tried 1750 straps instead of 1500? I have read in some MSI cards with samsung memory got better hashrate using 1625 and 1750 straps but not with MSI Armor version
Million thanks!!
What hash rates are you getting on the 2nd coin? What is your dcri set to? I have 5 470 8gb that I need to mod and turn them up. Just wondering what others are getting for dual mining stats. What memory speeds are you running them at?
I am dual mining PASC. It has a lower hashrate than DCR gets but make more money mining it. Average hash rate about 215 MH/s and the -dcri setting is 8. That is where I got the best ETH hashrate with PASC rate. I can get PASC much higher with higher -dcri but then ETH goes way down.
Hi again,
after research a little bit Ive installed another driver version, and After burner detect it as (Crimson 16.6),
Now i can mine with better Hashrate but ive got 25.4 maximum stable. Have someone got better Hashrate with Armor card??
Are you normally setting by watttool?? or using Afterburnner???
Million Thanks
after research a little bit Ive installed another driver version, and After burner detect it as (Crimson 16.6),
Now i can mine with better Hashrate but ive got 25.4 maximum stable. Have someone got better Hashrate with Armor card??
Are you normally setting by watttool?? or using Afterburnner???
Million Thanks
I am using patched Relive 16.2.1 and my hashrate in dual mining mode averages about 26.5 MH/s. Cryptomined on Youtube has a video on how to install and patch it with links to all the files.
What hash rates are you getting on the 2nd coin? What is your dcri set to? I have 5 470 8gb that I need to mod and turn them up. Just wondering what others are getting for dual mining stats. What memory speeds are you running them at?
Hi again,
after research a little bit Ive installed another driver version, and After burner detect it as (Crimson 16.6),
Now i can mine with better Hashrate but ive got 25.4 maximum stable. Have someone got better Hashrate with Armor card??
Are you normally setting by watttool?? or using Afterburnner???
Million Thanks
after research a little bit Ive installed another driver version, and After burner detect it as (Crimson 16.6),
Now i can mine with better Hashrate but ive got 25.4 maximum stable. Have someone got better Hashrate with Armor card??
Are you normally setting by watttool?? or using Afterburnner???
Million Thanks
I am using patched Relive 16.2.1 and my hashrate in dual mining mode averages about 26.5 MH/s. Cryptomined on Youtube has a video on how to install and patch it with links to all the files.
Jump to: