Right always 1300W.
Amp is X2 at 110V.
Topic: What frequency works best for Antminer S7? (Read 18261 times)
Only if physics is broken, or that's the world's most inefficient power supply for some reason. The DC power consumed by the device will be the same regardless what the input voltage to the DC power supply is; the only way the power consumed would change is if the PSU runs at a different efficiency at a different input voltage, and that's rarely more than about 2% difference.
One S7 using 2600W would burst into flames in a matter of seconds.
One S7 using 2600W would burst into flames in a matter of seconds.
Daily +- BTC0.00566026 or $3.73 for one unit of S7 @ 4730Ghs, barely enough to pay for the electricity bil
http://www.coinwarz.com/calculators/bitcoin-mining-calculator/?h=4730.00&p=2600.00&pc=0.00&pf=0.09&d=213492501107.51300000&r=12.70000000&er=659.27180000&hc=0.00
The cost could have something to do with whatever you're doing to make 1 S7 use 2600 watts
so 2600W@110V ?
Those are some really good temps considering the overclock. Have you checked power draw to see where the efficiency sits? The later batches are not as efficient (unmodded of course) as the original 54 chip boards were.
this is my configuration S7 B18
i got 3 S7 same batch..all same configuration
https://postimg.org/image/p2o65jlj5/
i got 3 S7 same batch..all same configuration
https://postimg.org/image/p2o65jlj5/
Daily +- BTC0.00566026 or $3.73 for one unit of S7 @ 4730Ghs, barely enough to pay for the electricity bil
http://www.coinwarz.com/calculators/bitcoin-mining-calculator/?h=4730.00&p=2600.00&pc=0.00&pf=0.09&d=213492501107.51300000&r=12.70000000&er=659.27180000&hc=0.00
The cost could have something to do with whatever you're doing to make 1 S7 use 2600 watts
Hello Mr. with that configuration, how many BTC they paid per day?
Hello Mr. with that configuration, how many BTC they paid per day?
Hello Mr. with that configuration, how many BTC they paid per day?
Daily +- BTC0.00566026 or $3.73 for one unit of S7 @ 4730Ghs, barely enough to pay for the electricity bil
http://www.coinwarz.com/calculators/bitcoin-mining-calculator/?h=4730.00&p=2600.00&pc=0.00&pf=0.09&d=213492501107.51300000&r=12.70000000&er=659.27180000&hc=0.00
Hello Mr. with that configuration, how many BTC they paid per day?
is normal, the fan full speed run at 5880 rpm...and your miner temp is good and should work perfect under stock frequency.
Hye, thanks for the info
Can i increase the frequency? The default frequency before is 700.00.
In the same time is ok if im set the fan speed limit to 85%?
Thanks guys!
My S7-F1, added 2nd fan, running @700mhz with fan speed set to 95%, it hash 4.7ths avg @66'c -69'c with the room temp. @32'c
https://i.imgur.com/1gyoeS8.jpg
Hello Mr. with that configuration, how many BTC they paid per day?
is normal, the fan full speed run at 5880 rpm...and your miner temp is good and should work perfect under stock frequency.
Hye, thanks for the info
Can i increase the frequency? The default frequency before is 700.00.
In the same time is ok if im set the fan speed limit to 85%?
Thanks guys!
My S7-F1, added 2nd fan, running @700mhz with fan speed set to 95%, it hash 4.7ths avg @66'c -69'c with the room temp. @32'c
https://i.imgur.com/1gyoeS8.jpg
Hello Mr. with that configuration, how many BTC they paid per day?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Batch 6, 32% fan speed
is normal, the fan full speed run at 5880 rpm...and your miner temp is good and should work perfect under stock frequency.
Hye, thanks for the info
Can i increase the frequency? The default frequency before is 700.00.
In the same time is ok if im set the fan speed limit to 85%?
Thanks guys!
My S7-F1, added 2nd fan, running @700mhz with fan speed set to 95%, it hash 4.7ths avg @66'c -69'c with the room temp. @32'c
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
After reading for months, and confirming in this thread; I am now confident that I have a batch 6 S7.
I run it all over the board freq wise. Power supply is a re-wired Coolmax 1600. It has 160A of 12v capability when you utilize 50A of 12v wires inside that are not leading to the PCIE modular ports from the factory. Exhaust ducted to the outside.
Just a little while ago I set it to 500Mhz and 30% fan speed. ~69-70* and hashing at 3.32Th average after 21 min.
Typically I have it at 600 and 55% fan speed. Averaging 4.02Th.... ~50* temp and varies on ambient temp.
I have also upped the clock to 700, and fan speeds on max. Ran 4.7Th average. Average temp was ~58-64*. Power supply liked to warm up pretty good on that run. Hashed it for 4 days solid with no issues.
After some long runs Ill take screenshots and share.
I run it all over the board freq wise. Power supply is a re-wired Coolmax 1600. It has 160A of 12v capability when you utilize 50A of 12v wires inside that are not leading to the PCIE modular ports from the factory. Exhaust ducted to the outside.
Just a little while ago I set it to 500Mhz and 30% fan speed. ~69-70* and hashing at 3.32Th average after 21 min.
Typically I have it at 600 and 55% fan speed. Averaging 4.02Th.... ~50* temp and varies on ambient temp.
I have also upped the clock to 700, and fan speeds on max. Ran 4.7Th average. Average temp was ~58-64*. Power supply liked to warm up pretty good on that run. Hashed it for 4 days solid with no issues.
After some long runs Ill take screenshots and share.
Hello,
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
Yes everything since Batch 8 has been 700MHz.
Rich
Rich, im using ANTMINER S7 BATCH 18.
Frequency set to 625.00 from 700.00, and this result is normal?
https://i.imgur.com/ycXB4gc.png
Im worried about Fan Speed now, its up to 5760 and 4200. Is that normal? And may i know why my pool no 3 status is dead.
Thanks.
is normal, the fan full speed run at 5880 rpm...and your miner temp is good and should work perfect under stock frequency.
Hye, thanks for the info
Can i increase the frequency? The default frequency before is 700.00.
In the same time is ok if im set the fan speed limit to 85%?
Thanks guys!
My S7-F1 is working very nicely at 700 with the may 23rd FW
Hello,
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
Yes everything since Batch 8 has been 700MHz.
Rich
Rich, im using ANTMINER S7 BATCH 18.
Frequency set to 625.00 from 700.00, and this result is normal?
Im worried about Fan Speed now, its up to 5760 and 4200. Is that normal? And may i know why my pool no 3 status is dead.
Thanks.
is normal, the fan full speed run at 5880 rpm...and your miner temp is good and should work perfect under stock frequency.
Hello,
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
Yes everything since Batch 8 has been 700MHz.
Rich
Rich, im using ANTMINER S7 BATCH 18.
Frequency set to 625.00 from 700.00, and this result is normal?
https://i.imgur.com/ycXB4gc.png
Im worried about Fan Speed now, its up to 5760 and 4200. Is that normal? And may i know why my pool no 3 status is dead.
Thanks.
Thank you !
Hello,
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
Yes everything since Batch 8 has been 700MHz.
Rich
Hello,
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
I just received my batch 16 S7, and the default frequency was set at 700....
Are they all at this freq since batch 9 ?
Hello,
I have a antminer S7 from B6. After a week of running, one hashboard got only 36 chips running instead of 45. Anyone experience with this? Can I resolve this or are the other chips broken / dead??
Thx
I have a antminer S7 from B6. After a week of running, one hashboard got only 36 chips running instead of 45. Anyone experience with this? Can I resolve this or are the other chips broken / dead??
Thx
five
1. go to pool settings and simply click on save and apply (one time I had the same and this simple procedure fixed it).
2. go to "advanced" in gui and simply click on save and apply.
3. #1 followed in 10-15 min by #2.
4. go to system, click on reboot
5. hard reboot (if you have access to PSU).
I would do either #1 or #2 first, then see what happens and do another option.
#1-4 done already, but anyways thanks for the response!
I was planning on doing a hard reboot this weekend when I have access. Hope that resolves the problem!
Hard reboot doesn't resolve this problem either, anyone any suggestions..? :-(
Hello,
I have a antminer S7 from B6. After a week of running, one hashboard got only 36 chips running instead of 45. Anyone experience with this? Can I resolve this or are the other chips broken / dead??
Thx
I have a antminer S7 from B6. After a week of running, one hashboard got only 36 chips running instead of 45. Anyone experience with this? Can I resolve this or are the other chips broken / dead??
Thx
five
1. go to pool settings and simply click on save and apply (one time I had the same and this simple procedure fixed it).
2. go to "advanced" in gui and simply click on save and apply.
3. #1 followed in 10-15 min by #2.
4. go to system, click on reboot
5. hard reboot (if you have access to PSU).
I would do either #1 or #2 first, then see what happens and do another option.
#1-4 done already, but anyways thanks for the response!
I was planning on doing a hard reboot this weekend when I have access. Hope that resolves the problem!
Jump to: