I'm getting 46-47mh currently.
6 months later its at 45mh.
Anyone getting much more than 45MH now (April 2021) from a 1080Ti?
This is not a bad result for a five-year video card.
Topic: What speed is your 1080ti running? (EThash) (Read 556 times)
6 months later its at 45mh.
Anyone getting much more than 45MH now (April 2021) from a 1080Ti?
This is not a bad result for a five-year video card.
This is a known bug in the 10xx series. Only 1070ti was it fixed by Nvidia.
I'm getting 46-47mh currently.
6 months later its at 45mh.
Anyone getting much more than 45MH now (April 2021) from a 1080Ti?
on my cards I get 46+Mh/s with a consumption of 200W P2 - off but with each epoch the hashes gradually fall ... 
I'm getting 46-47mh currently.
It's a shame nVidia never released a DAG patch like AMD did, If that were the case these would still be at 55mh
It's a shame nVidia never released a DAG patch like AMD did, If that were the case these would still be at 55mh
Google Nvidia TLB bug and you'll see why. Nvidia wrote into the hardware of Pascal how it accesses the memory. All Nvidia Pascal GPUs will suffer this issue. Better off selling 1080tis and buying 3060ti's
47-49MH. 120/1000/200. Last month hashrate slowly falling. A month ago it was the same hashrate, buy it was 110/1000/180. When it falls 1-2MH i increase power consumption and core clock.
What miner you talking about? is it the Bminer or trex miner or phonenix?
I can only reach 44mh/s with trex and 41-42mh/s with phoenixminer. I can't make the Bminer always invalid seed when running it with hiveos.
just run it efficient and add some gpus
let's say your have 50 1080ti's at 46MH = 2.3GH ...if you are happy with your current profitability and then they lost 2MH each, then you are at 2.2GH..solution: add a 3080 or a 3090 and then you are back to 2.3GH, this way you might want to try your next brand/model of gpus that you will upgrade to before buying in bulk
you can add piece by piece and you can sell piece by piece..
but if you made a lot of money due to bear market patience and trading then just put them all in a box and replace them all with 3090s/3080s ...unless you choose to be more exposed to coins, betting it will go a lot more higher.
let's say your have 50 1080ti's at 46MH = 2.3GH ...if you are happy with your current profitability and then they lost 2MH each, then you are at 2.2GH..solution: add a 3080 or a 3090 and then you are back to 2.3GH, this way you might want to try your next brand/model of gpus that you will upgrade to before buying in bulk
you can add piece by piece and you can sell piece by piece..
but if you made a lot of money due to bear market patience and trading then just put them all in a box and replace them all with 3090s/3080s ...unless you choose to be more exposed to coins, betting it will go a lot more higher.
Smos. Bminer. 70 core 1000mem 280 power
How much extra power does your video card consume for an increase of 5 megahash? 
Do you have cheap electricity?
Typical Hashrate ETH for 1 1080ti is 47-52 Mhash, 180 - 240 Watt.
Heat is a problem, so bigger 1080tis with higher boost and lower temps are better than founders editions...
Founders edition are mostly bad for mining because the design carries only single fan, they have bad heat sync due to less fans, the best graphics cards for mining must have three fans to get rid of heats very easily Heat is a problem, so bigger 1080tis with higher boost and lower temps are better than founders editions...
I'm run my cards at +200 core, -1000 mem, 800mV (130-145W). Speeds are on average 41MH
My EVGA 1080TI settings:
Core clock : +140
Memory clock: +600
Power limit : 75%
Gpu power consumption : 185W
NBminer (activated -mt settings) = 47MH/s (sometimes 55MH/s for a while)
In contrast of old and cheap RX470 8GB on PhoenixMiner = 32MH/s with 85W power consumption.
Core clock : +140
Memory clock: +600
Power limit : 75%
Gpu power consumption : 185W
NBminer (activated -mt settings) = 47MH/s (sometimes 55MH/s for a while)
In contrast of old and cheap RX470 8GB on PhoenixMiner = 32MH/s with 85W power consumption.
My settings for 1080 TI's range from
Core clock : + 50 to +100
Memory clock: +350 to +550
Power limit : 81% to 84%
Gpu power consumption : 200 to 230 watts
And get 45 to 46 mhs on phoenix miner with straps 2
Core clock : + 50 to +100
Memory clock: +350 to +550
Power limit : 81% to 84%
Gpu power consumption : 200 to 230 watts
And get 45 to 46 mhs on phoenix miner with straps 2
47-49MH. 120/1000/200. Last month hashrate slowly falling. A month ago it was the same hashrate, buy it was 110/1000/180. When it falls 1-2MH i increase power consumption and core clock.
What miner you talking about? is it the Bminer or trex miner or phonenix?
I can only reach 44mh/s with trex and 41-42mh/s with phoenixminer. I can't make the Bminer always invalid seed when running it with hiveos.
47-49MH. 120/1000/200. Last month hashrate slowly falling. A month ago it was the same hashrate, buy it was 110/1000/180. When it falls 1-2MH i increase power consumption and core clock.
49-50MHs, 925mV, 1950 MHz Core. Miner reports ~200W
Do you mind sharing the latest hashrate this month?
Or it drops a bit to 47mh/s or lower?
Are you running it on Windows OS or Linux?
Typical Hashrate ETH for 1 1080ti is 47-52 Mhash, 180 - 240 Watt.
Heat is a problem, so bigger 1080tis with higher boost and lower temps are better than founders editions...
Heat is a problem, so bigger 1080tis with higher boost and lower temps are better than founders editions...
This week I have a lot of restarts I am trying to find the reason I was stable about 6 months.
Are you mining against NiceHash?
Nice hash has sucked so much I moved all gear to viabtc.
I concur, I'm mining on Ethermine.
This week I have a lot of restarts I am trying to find the reason I was stable about 6 months.
Are you mining against NiceHash?
Nice hash has sucked so much I moved all gear to viabtc.
This week I have a lot of restarts I am trying to find the reason I was stable about 6 months.
Are you mining against NiceHash?
49-50MHs, 925mV, 1950 MHz Core. Miner reports ~200W
Jump to: