Pages:
Author

Topic: What would the best way to profit from 19 workstations be? (PCIe,ASIC or FPGA?) (Read 3571 times)

sr. member
Activity: 285
Merit: 250
Now you have 19 pieces of crap to get rid of and the company doesn't have to deal with the e-waste.
You could sell them to someone who wants an old junker to mess with or wants to play with a linux box.
donator
Activity: 2772
Merit: 1019
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
Uh, yeah they do.  Most good PSU's have the last 4 pins of a 24-pin disconnectable, to be compatible with any of the older motherboards as well as the newer ones.
Surprisingly often, old Dells had a completely rearranged connector pinouts, even though the connector fit. Swapping a non-dell PSU would fry the board.

and throw fucking flames out the PSU as I've experienced. FUCK DELL!

OP, mine litecoin and exchange for BTC on btc-e.com? (not sure if viable, but certainly an option)
sr. member
Activity: 476
Merit: 250
Keep it Simple. Every Bit Matters.
Having managed virtual servers, webservers, and the like, I'd say it's not worth it. This is literally a TON of extra time/headaches, just to make more $ with them several months down the road.

Just sell them.

Managed servers are a lot of work yes, but I didn't try to explain managed servers, most definitely more like un-managed servers.
These would be setup to be entirely managed by those renting them, no hand holding. Very little extra work unless their is actually a hardware problem.

It's an idea, an option. Selling them certainly would provide a quick buck right now, no doubt.
legendary
Activity: 952
Merit: 1000
Not ideal at all as already been said.
They would not be efficient for GPU's and only need one to be hooked up to some FPGA's or when ASIC come around. But you got 19 of them.
Could be they be used for mining? No, but depends if you've got any interest in being a server admin...

If you really want to make use of them, clean them up and make sure they have at least 2Gb of ram and half decent amount of Hard drive space.
Install Linux on a few and market it, get them ready as you get demand. You could probably start a small dedicated server farm, for webspace.

Hardware might be old, but it be powerful enough if you just rent each one out to one person, to use as they want.
Configured right each one could handle being a webserver, considering it be a dedicated server.
Give them some cost efficient upgrades and I'm sure some income could be made on them.

For the right price I'm sure their would be some that would do it, could even accept bitcoins as payment Smiley

Having managed virtual servers, webservers, and the like, I'd say it's not worth it. This is literally a TON of extra time/headaches, just to make more $ with them several months down the road.

Just sell them.
sr. member
Activity: 476
Merit: 250
Keep it Simple. Every Bit Matters.
Not ideal at all as already been said.
They would not be efficient for GPU's and only need one to be hooked up to some FPGA's or when ASIC come around. But you got 19 of them.
Could be they be used for mining? No, but depends if you've got any interest in being a server admin...

If you really want to make use of them, clean them up and make sure they have at least 2Gb of ram and half decent amount of Hard drive space.
Install Linux on a few and market it, get them ready as you get demand. You could probably start a small dedicated server farm, for webspace.

Hardware might be old, but it be powerful enough if you just rent each one out to one person, to use as they want.
Configured right each one could handle being a webserver, considering it be a dedicated server.
Give them some cost efficient upgrades and I'm sure some income could be made on them.

For the right price I'm sure their would be some that would do it, could even accept bitcoins as payment Smiley
legendary
Activity: 952
Merit: 1000
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
Uh, yeah they do.  Most good PSU's have the last 4 pins of a 24-pin disconnectable, to be compatible with any of the older motherboards as well as the newer ones.
Surprisingly often, old Dells had a completely rearranged connector pinouts, even though the connector fit. Swapping a non-dell PSU would fry the board.

^^^ This. Never underestimate a manufacturer's obsession for proprietary components.

I meant 20 pin connector  Embarrassed

Yepper,I did my homework years ago trying to help folks upgrade thier PC's over Teamspeak.You have to be very careful what you say can work.If I goof it could cost someone a PC (namely me  Shocked ).

http://pinouts.ru/pin_Power.shtml

http://pinouts.ru/Power/dell_atxpower_pinout.shtml



I remember cutting a splicing an ATX PSU to work in an old Apple G4 Sawtooth. Fun times...
legendary
Activity: 2212
Merit: 1001
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
Uh, yeah they do.  Most good PSU's have the last 4 pins of a 24-pin disconnectable, to be compatible with any of the older motherboards as well as the newer ones.
Surprisingly often, old Dells had a completely rearranged connector pinouts, even though the connector fit. Swapping a non-dell PSU would fry the board.

^^^ This. Never underestimate a manufacturer's obsession for proprietary components.

I meant 20 pin connector  Embarrassed

Yepper,I did my homework years ago trying to help folks upgrade thier PC's over Teamspeak.You have to be very careful what you say can work.If I goof it could cost someone a PC (namely me  Shocked ).

http://pinouts.ru/pin_Power.shtml

http://pinouts.ru/Power/dell_atxpower_pinout.shtml

legendary
Activity: 1274
Merit: 1004
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
Uh, yeah they do.  Most good PSU's have the last 4 pins of a 24-pin disconnectable, to be compatible with any of the older motherboards as well as the newer ones.
Surprisingly often, old Dells had a completely rearranged connector pinouts, even though the connector fit. Swapping a non-dell PSU would fry the board.
True, but these are Core2Duo based. They can't be more than 6 years old.
legendary
Activity: 952
Merit: 1000
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
Uh, yeah they do.  Most good PSU's have the last 4 pins of a 24-pin disconnectable, to be compatible with any of the older motherboards as well as the newer ones.
Surprisingly often, old Dells had a completely rearranged connector pinouts, even though the connector fit. Swapping a non-dell PSU would fry the board.

^^^ This. Never underestimate a manufacturer's obsession for proprietary components.
rjk
sr. member
Activity: 448
Merit: 250
1ngldh
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
Uh, yeah they do.  Most good PSU's have the last 4 pins of a 24-pin disconnectable, to be compatible with any of the older motherboards as well as the newer ones.
Surprisingly often, old Dells had a completely rearranged connector pinouts, even though the connector fit. Swapping a non-dell PSU would fry the board.
legendary
Activity: 1400
Merit: 1005
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
Uh, yeah they do.  Most good PSU's have the last 4 pins of a 24-pin disconnectable, to be compatible with any of the older motherboards as well as the newer ones.
legendary
Activity: 2212
Merit: 1001
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?

I'll bet you would be hard pressed to find a PSU for that old of a PC that has the correct 24 pin mobo connector or enough wattage.An aftermarket PSU dosen't just plug & play when they are IBM,Dell,Compaq,etc,in most instances  Sad
donator
Activity: 1731
Merit: 1008
You could get between 90 and 120$ for these given they have an 80+ hdd and 2gb ram. (and are ready to boot)

Just-saying
hero member
Activity: 686
Merit: 500
Wat
Stick them on here http://www.bitmit.net/en/recent then buy a bfl single with the cash Smiley
legendary
Activity: 1274
Merit: 1004
Wow, $90 for that? Wouldn't you be better off picking up a decent 850W PS on sale than running that in one of your drive bays?
legendary
Activity: 2212
Merit: 1001
Well,if you really want use these PC's for mining get one of these & put it in your drive bay  Cheesy

http://www.newegg.com/Product/Product.aspx?Item=N82E16817104054

May not run a 5970,but anything smaller should be no problem.

I've never even heard of those before. Nifty!

It works great for the gamers in our clan who can't afford or find a new powersupply for upgrading thier vid cards on older PC's  Wink
sr. member
Activity: 324
Merit: 250
Sweet looking cases, they'd make nice HTPCs.
sr. member
Activity: 336
Merit: 250
Sell them locally or donate them for the tax credit. Way too much hassle + electricity powering components that won't be generating BTC.
rjk
sr. member
Activity: 448
Merit: 250
1ngldh
Well,if you really want use these PC's for mining get one of these & put it in your drive bay  Cheesy

http://www.newegg.com/Product/Product.aspx?Item=N82E16817104054

May not run a 5970,but anything smaller should be no problem.
450 watts would run a 5970 easy, even with an overclock. But the funky PCIe slot would be a PITA.
legendary
Activity: 952
Merit: 1000
Well,if you really want use these PC's for mining get one of these & put it in your drive bay  Cheesy

http://www.newegg.com/Product/Product.aspx?Item=N82E16817104054

May not run a 5970,but anything smaller should be no problem.

I've never even heard of those before. Nifty!
Pages:
Jump to: