Topic: Withdrwal issue with myetherwallet (Read 161 times)
Hey folks thank you everyone for helping me out I have figured out what was wrong with the transaction it was actually the gas fee when I used to initiate the transaction I had enough balance to pay the gas fee but the gas we tends to increase at the time of transaction so once I click the send button gas fee just to increase as a result it will leave me with insufficient amount to pay the gas fee thus my transaction will not go through and I'll end up losing the amount which I have committed for the gas free. Now it's sorted i have made the transaction.
Looking at your transaction data above, everything seems to be correct and in their place, the same as my case with MEW a few months ago, I don't know why but everything worked fine when I used Metamask. Maybe what happened to us was a system bug from MEW, I don't really understand, what I understand is, no one can compensate me for the lost transaction gas fee even though my transaction was not executed properly.
it usually happens because the gas fee is too low. I've done that too. do a manual setting of the gas fee, with the hope that the fee I spend is small, and the transaction can occur. however, because of this, my fee was deducted, but my transaction failed. That's why people sometimes suggest using the recommended fee, even though the lowest one is quite expensive. however, it is better to pay a little more, but the transaction is successful, than unsuccessful. well, it can be a lesson for the next transaction. if you want your transaction to be cheap, wait until the fee goes down.
Some time eth gas is not stable when sending ERC20 coin, first when begin with sending we see example eth gas on https://etherscan.io/gastracker stable on 92 like right now, but few second after our coin sending up drastically will longer process and take few hours for sending completed depend if gas price will drop have chance for transaction completed, but if keep stable high need waiting more than several hours and probably have chance will be failed. Better use faster gas fees when sending coin if looks not stable but if you find with stable gas you can set with normal gas fees. 
I am trying to withdraw the USDT in myetherwallet but everytime when I send transaction to my Binance USDT ERC 20 address then only the ETH gas fee gets deducted and USDT is not transferred. Any idea what's going wrong ?
I have experienced this problem because you've used a lower fee than the required gas fee to the ETH network.To avoid this problem in the future here is the link that might help you to avoid it next time.
It seems wasting your gas fee if you force to transact even if lower than the required amount.
many have a phobia of myetherwallet, which is a phobia of fee gas. it takes a lot of ethereum to transfer tokens, even if it only transfers a small amount. this is what makes me lazy to use myetherwallet.
The gas problem is not in the side of mew but they are just following the recommended gas fee based on eth network. If there is going to be blamed here that is only eth and not mew. I am an old user of mew and I do not have any problems with them and I am still using them until now as my main eth/erc20 wallet.What only limits me to make a transaction is the high fee and my tokens are not that huge anyway to take the risk. Have you tried other eth based wallets ex metamask and trustwallet because my experience is also the same as mew where their gas fees are also high but I think there is an option to manually set the gas based on your own preference but this can be risky as transactions might get stuck if you put a very small fee.
I am trying to withdraw the USDT in myetherwallet but everytime when I send transaction to my Binance USDT ERC 20 address then only the ETH gas fee gets deducted and USDT is not transferred. Any idea what's going wrong ?
I have experienced this, the problem I faced was the lack of a gas fee, where when I sent the standard gas price and when the delivery took place the cost changed and there was a cancellation by MEw
it usually happens because the gas fee is too low. I've done that too. do a manual setting of the gas fee, with the hope that the fee I spend is small, and the transaction can occur. however, because of this, my fee was deducted, but my transaction failed. That's why people sometimes suggest using the recommended fee, even though the lowest one is quite expensive. however, it is better to pay a little more, but the transaction is successful, than unsuccessful. well, it can be a lesson for the next transaction. if you want your transaction to be cheap, wait until the fee goes down.
it could be caused by the bugs in the myetherwallet and maybe it could be caused by you forget to put the correspondent amounts to be sent to your exchange site address, i see that your transaction gets confirmed which mean if there was no problem with it and you just forgot and this is the problem.
i don't see another possibility about why your transaction didn't contain the USDT that you wanna send it. The fact that if your USDT is still in your account and it didn't go anywhere. This is the point.
i don't see another possibility about why your transaction didn't contain the USDT that you wanna send it. The fact that if your USDT is still in your account and it didn't go anywhere. This is the point.
but when I check transaction it shows 0 USDT transferred
https://etherscan.io/tx/0x033fb4d52d8693b5da9b7a1f09ab3d8dbf7901d4c52319b11151f6fd173545aa
By looking at your transaction hash, you did not indicate the amount of USDT you're going to send to Binance.https://etherscan.io/tx/0x033fb4d52d8693b5da9b7a1f09ab3d8dbf7901d4c52319b11151f6fd173545aa
Source: https://www.myetherwallet.com/
Just a tip though, carefully examine the transaction tab of every wallet or exchange you are going to use because you will spending a ton of transaction fees if the information is incorrectly filled up especially now that you are using ETH chain.
- https://help.myetherwallet.com/en/articles/5446148-how-to-send-a-transaction-with-mew-web
the transaction shows successful but zero usdt available, i think you should try the option suggested by the member above and import your mew key to mm or trustwallet and try those, it won't cost you anything to import and try it, i see this is from valerstudio reward, i save myself the trouble and use an exchange wallet to avoid eth ridiculous gas fees, afterwards i send them to my personal wallet using trc20 usdt.
He not focus about amount for USDT withdrawing, that transaction based on tx id sent above have been success but just mistake with sending 0 USDT, I think he waste fees eth for sending zero USDT coin to other wallet, but I don't see detail with his own wallet which one because latest transaction only show 0 USDT sent and have been success, but still not he has USDT or not on his wallet because I am looking for not find yet about how much USDT assets have by OP. 
I guess you forgot to put the correct amounts into your transaction. You may feel if you did it but the fact that your transaction was showing zero value being send from your wallet to the another address. this means if you must remember to put the correct amounts again to your next transaction. This makes you pay double fees in total as the first transaction can be considered as failed transaction. You need to try that again for the second time and i hope you will not forget it again later.
Thanks for trying to help me out, actually while I was making transaction i had enough ETH to cover gas fee but when I check transaction it shows 0 USDT transferred. I have attached the hash details for your reference.
https://etherscan.io/tx/0x033fb4d52d8693b5da9b7a1f09ab3d8dbf7901d4c52319b11151f6fd173545aa
You sure you put something not 0? Cause in your eth scan it clearly says 0. How abouy used another wallet like trustwallet, metamask, or imtoken, import your wallet there and used that instead of myetherwallet app. Possible that there is an error or there is something wrong on myetherwallet. But it only down to two:https://etherscan.io/tx/0x033fb4d52d8693b5da9b7a1f09ab3d8dbf7901d4c52319b11151f6fd173545aa
1st is their something wrong with the myether or you really did a mistake on putting values.
that means you didn't fill the decimal for how much USDT you wanna send to your binance USDT erc20 wallet. You need to send another transaction again and make sure if you have been putting the correct decimal about how much USDT you wanna send to your binance account. If you're using automatic fees calculation on myetherwallet and then you must try to double-check if the decimal of your tokens is not going back again to zero.
It seems like when you're filling or chose the recommended fees and the decimal of your USDT was going back to zero again. That needs to be changed and make sure to double-check
yup! you are right.It seems like when you're filling or chose the recommended fees and the decimal of your USDT was going back to zero again. That needs to be changed and make sure to double-check
i hope the OP reads your comment, maybe this will help the OP.
my advice, before sending anything we must make sure everything is filled properly as needed. and also we need to check it repeatedly, to make sure there are no errors in every shipment.
that means you didn't fill the decimal for how much USDT you wanna send to your binance USDT erc20 wallet. You need to send another transaction again and make sure if you have been putting the correct decimal about how much USDT you wanna send to your binance account. If you're using automatic fees calculation on myetherwallet and then you must try to double-check if the decimal of your tokens is not going back again to zero.
It seems like when you're filling or chose the recommended fees and the decimal of your USDT was going back to zero again. That needs to be changed and make sure to double-check
It seems like when you're filling or chose the recommended fees and the decimal of your USDT was going back to zero again. That needs to be changed and make sure to double-check
Fees really are too high today but if OP is aware that he has paid the right fee, this is another issue.
The transaction went through and it's successfully been confirmed by the network and you just like donated the fee. Are you sure that you haven't forgotten to input the amount of USDT that you're about to send?
The transaction went through and it's successfully been confirmed by the network and you just like donated the fee. Are you sure that you haven't forgotten to input the amount of USDT that you're about to send?
I am trying to withdraw the USDT in myetherwallet but everytime when I send transaction to my Binance USDT ERC 20 address then only the ETH gas fee gets deducted and USDT is not transferred. Any idea what's going wrong ?
since you are using binance platform probably the support only can aswer to that question. And try to refresh if you're using browser and restart the app if you're using mobile phone because it might be a bugs or your internet. However if it still the same then the only choice you have is to communicate with the support because it's impossible to be deducted if there's an error in your transaction, for example you didn't meet the real amount gas fees or the amount is not yet sent.. 
Have you entered the USDT amount for the withdrawal transaction to that address, I doubt you may have missed it because the transaction was completed but only 0 USDT was sent.
I am trying to withdraw the USDT in myetherwallet but everytime when I send transaction to my Binance USDT ERC 20 address then only the ETH gas fee gets deducted and USDT is not transferred. Any idea what's going wrong ?
Most likely the issue is that you don't have enough eth to cover the fee. How much ether you have in your address?
If you think it's an error that try to access your wallet using another method. Anyway, using MEW is not recommended and with other clients you may find friendly-use option to adjust fee but make sure that the transaction won't be broadcasted if you don't have enough eth.
The best advice is to really change the wallet, I had this.Insert your private key and try to send it again via metamask or another wallet.Also, for a transaction, you will need about $ 10 in Ethereum.
the transaction shows successful but zero usdt available, i think you should try the option suggested by the member above and import your mew key to mm or trustwallet and try those, it won't cost you anything to import and try it, i see this is from valerstudio reward, i save myself the trouble and use an exchange wallet to avoid eth ridiculous gas fees, afterwards i send them to my personal wallet using trc20 usdt.
Jump to: