No problem, I really want to help.
You are right, I rar. it and is now 175mb, is it correct?
I need 10% more and is ready!
Topic: [WORLDWIDE]Bitmine - 950 GH/S 1500 USD - Next day delivery. - page 19. (Read 60029 times)
Guys, this is huge file, I cannot upload bigger files than 2GB in dropbox.
Where else can I upload it?
Where else can I upload it?
https://mega.co.nz/
Kim Dotcom service
Thanks, I am uploading it there.
Give a few more minutes.
Compressing it into a .zip file should bring it under 1gb.
Guys, this is huge file, I cannot upload bigger files than 2GB in dropbox.
Where else can I upload it?
Where else can I upload it?
https://mega.co.nz/
Kim Dotcom service
Thanks, I am uploading it there.
Give a few more minutes.
$150 shipping worldwide.
Hi, how much shipping and handling to Europe - Italy?
Thanks in advance W_M
Thanks in advance W_M
Guys, this is huge file, I cannot upload bigger files than 2GB in dropbox.
Where else can I upload it?
Where else can I upload it?
https://mega.co.nz/
Kim Dotcom service
Guys, this is huge file, I cannot upload bigger files than 2GB in dropbox.
Where else can I upload it?
Where else can I upload it?
That is very nice.
However these are atleast 10% cheaper, at the end of the day it gives you around the same gh/$
Furthermore i dont know if everyone experiences the same problem, i can only speak for myself, and i only own one unit.
However these are atleast 10% cheaper, at the end of the day it gives you around the same gh/$
Furthermore i dont know if everyone experiences the same problem, i can only speak for myself, and i only own one unit.
Just reading through this thread..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
It says 1th at the unit aswell, but due to hardware errors etc. it is only around 850 at the pool.
What is yours at the pool?
Mine says 1.02 th/s at ghash, sometimes up to 1.10 th/s
I have 2 and both are the same stats..
Just reading through this thread..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
It says 1th at the unit aswell, but due to hardware errors etc. it is only around 850 at the pool.
What is yours at the pool?
I have found some issue when opened, I will tell later.
Just reading through this thread..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
It says 1th at the unit aswell, but due to hardware errors etc. it is only around 850 at the pool.
What is yours at the pool?
Just reading through this thread..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
I don't have any of these problems with dragon 1 th/s miners.
Plug them in, set them and they hash steadily at over 1 th/s nonstop..
These ones on here must have different hardware or control software..
I also think the underperformance and hardware errors at around 10%+ are power related issues.
Has anyone tried simply hooking one board up with another power supply?
Alternatively it could be that the onboard DC/DC power regulators, which should be software-controlled, might not be set to the optimal settings on the dragonminer firmware, as it is not the original one.
Has anyone tried simply hooking one board up with another power supply?
Alternatively it could be that the onboard DC/DC power regulators, which should be software-controlled, might not be set to the optimal settings on the dragonminer firmware, as it is not the original one.
I have two miners working well, how to upload the image?
I want to help.
I want to help.
Use win32 dis imager;
Choose as the directory where you want to produce the image and name it miner.img (or sth. else, but keep the .img)
At the right of that choose the drive your sdcard ist (e.g./H)
Press the read button.
It will then read the sdcard and create an image.
This image would help many people on here if you upload it e.g. in your dropbox and share the link.
I would recommend compressing it in a zip-file.
Also, you will have your own backup, if one of your sdcards should fail.
I will do it right now.
I have two miners working well, how to upload the image?
I want to help.
I want to help.
Use win32 dis imager;
Choose as the directory where you want to produce the image and name it miner.img (or sth. else, but keep the .img)
At the right of that choose the drive your sdcard ist (e.g./H)
Press the read button.
It will then read the sdcard and create an image.
This image would help many people on here if you upload it e.g. in your dropbox and share the link.
I would recommend compressing it in a zip-file.
Also, you will have your own backup, if one of your sdcards should fail.
You can use this utility to save the image you have.
You choose read mode and save it.
http://sourceforge.net/projects/win32diskimager/
From there you can share it.
Others can use the same utility to create a factory image for their miners.
You choose read mode and save it.
http://sourceforge.net/projects/win32diskimager/
From there you can share it.
Others can use the same utility to create a factory image for their miners.
I have two miners working well, how to upload the image?
I want to help.
I want to help.
I just figured out how to make an image from it.
Here though is the generic image that works well.
https://bitcointalksearch.org/topic/the-install-instruction-and-trouble-shoot-of-1t-dragon-miner-545642
2nd post has the image and the utility to put it on the SD card.
Can you share the image for the SD card you have please ??
Here though is the generic image that works well.
https://bitcointalksearch.org/topic/the-install-instruction-and-trouble-shoot-of-1t-dragon-miner-545642
2nd post has the image and the utility to put it on the SD card.
I did get one of these units to review and the review is live now.
http://www.cryptocoinsnews.com/news/bittech-1-ths-bitcoin-miner-review/2014/04/24
It is a good miner. There are some issues but none that are different than any other Dragon I have seen.
The one blade that collider is having the high errors on seems to be not enough power. I think the more robust power supplies that Bit-Tech is working on getting in the newer batch systems will take care of that and allow for better over clocking.
I am looking forward to the improvements that Bit-Tech is working on.
http://www.cryptocoinsnews.com/news/bittech-1-ths-bitcoin-miner-review/2014/04/24
It is a good miner. There are some issues but none that are different than any other Dragon I have seen.
The one blade that collider is having the high errors on seems to be not enough power. I think the more robust power supplies that Bit-Tech is working on getting in the newer batch systems will take care of that and allow for better over clocking.
I am looking forward to the improvements that Bit-Tech is working on.
Can you share the image for the SD card you have please ??
I have two miners working well, how to upload the image?
I want to help.
I want to help.
I did get one of these units to review and the review is live now.
http://www.cryptocoinsnews.com/news/bittech-1-ths-bitcoin-miner-review/2014/04/24
It is a good miner. There are some issues but none that are different than any other Dragon I have seen.
The one blade that collider is having the high errors on seems to be not enough power. I think the more robust power supplies that Bit-Tech is working on getting in the newer batch systems will take care of that and allow for better over clocking.
I am looking forward to the improvements that Bit-Tech is working on.
http://www.cryptocoinsnews.com/news/bittech-1-ths-bitcoin-miner-review/2014/04/24
It is a good miner. There are some issues but none that are different than any other Dragon I have seen.
The one blade that collider is having the high errors on seems to be not enough power. I think the more robust power supplies that Bit-Tech is working on getting in the newer batch systems will take care of that and allow for better over clocking.
I am looking forward to the improvements that Bit-Tech is working on.
Can you share the image for the SD card you have please ??
Does anyone have a link to the technobit image?? I have not seen it yet. 
What do you mean? custom raspbian linux with cgminer and hexminer patches?
Also i seem to have a problem with one of the boards:
That seems pretty bad... essentailly one board is nearly defective.
Quote
BTW...did you try a Technobit version of the software...? ...People are claiming that is quite stable...
What do you mean? custom raspbian linux with cgminer and hexminer patches?
Also i seem to have a problem with one of the boards:
That seems pretty bad... essentailly one board is nearly defective.
Jump to: