Pages:
Author

Topic: WTB faulty ANY ASIC - page 5. (Read 7625 times)

sr. member
Activity: 361
Merit: 250
March 10, 2014, 12:43:38 PM
#28
pm send
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
March 10, 2014, 12:30:07 PM
#27
I've got a component board from a gen 1 Avalon module which had a blown capacitor if you're interested, in the UK. PM me
sr. member
Activity: 361
Merit: 250
March 10, 2014, 10:39:39 AM
#26
send me adress of any coin a will send u tip Smiley
sr. member
Activity: 361
Merit: 250
March 10, 2014, 10:39:17 AM
#25
i no go this usb Sad
hero member
Activity: 924
Merit: 1000
Watch out for the "Neg-Rep-Dogie-Police".....
March 10, 2014, 10:27:43 AM
#24
I got a faulty USB Erupter if you want it - UK based

Posted  Wink

No tip?  Wink
newbie
Activity: 13
Merit: 0
March 02, 2014, 11:19:46 AM
#23
Got a 10GH/s 2nd gen Blade block erupter card, melted fuse, the rest is probably working.
full member
Activity: 211
Merit: 100
February 28, 2014, 02:57:08 PM
#22
faulty 38gh/s cube for sale!
member
Activity: 105
Merit: 10
February 27, 2014, 05:02:44 PM
#21
pmed you
hero member
Activity: 924
Merit: 1000
Watch out for the "Neg-Rep-Dogie-Police".....
February 27, 2014, 03:43:59 PM
#20
I got a faulty USB Erupter if you want it - UK based

Posted  Wink
hero member
Activity: 924
Merit: 1000
Watch out for the "Neg-Rep-Dogie-Police".....
February 25, 2014, 08:41:48 AM
#19
I got a faulty USB Erupter if you want it - UK based
full member
Activity: 121
Merit: 100
HodL tight, it's gonna get wild
February 17, 2014, 10:58:52 AM
#18
one of my Antminers stopped hashing, - there is a solid light on the network port - cannot talk to it - I suspect that the control board is where the issue lies.
Have escalated to Bitmain, no response as yet. PM me if interested.
sr. member
Activity: 490
Merit: 250
December 17, 2013, 02:08:40 AM
#17
I have a faulty bitburner 20chip (avalon gen1) miner purchased from burninmining.com The thermal paste on one of the components looks like it was hastily/crappily applied, it hashes at a lower hashrate than my other units or boots up in ZOMBIE mode. Haven't been using it because of these reasons. What would you offer be? Would prefer not to use escrow, but will if you absolutely insist and will cover the fees.

Thanks!

PM Me, I am located in the United States
sr. member
Activity: 361
Merit: 250
December 16, 2013, 07:11:03 PM
#16
I've got 3 dead USB Block Erupters. I'm not sure if it is even worth shipping them, but if you want to pay shipping (from Ohio, US) I'll send them.

I just managed to chip one of the fans on my BFL SC single (sold to me as 60GHs, but I never had it above 54/55GHs or so).

Since I have been running it without the case, to reduce the excruciating sound, apparently it only needs a fan on one side, so depending on which side I broke, it should be very easy to either switch over the complete one, or unplug the faulty one..

Power supply is third-party, as I was able to blow up the original once it arrived Tongue

I would entertain an offer from you.

pm send
full member
Activity: 126
Merit: 100
December 16, 2013, 11:00:04 AM
#15
I just managed to chip one of the fans on my BFL SC single (sold to me as 60GHs, but I never had it above 54/55GHs or so).

Since I have been running it without the case, to reduce the excruciating sound, apparently it only needs a fan on one side, so depending on which side I broke, it should be very easy to either switch over the complete one, or unplug the faulty one..

Power supply is third-party, as I was able to blow up the original once it arrived Tongue

I would entertain an offer from you.
full member
Activity: 168
Merit: 100
December 16, 2013, 10:52:35 AM
#14
I've got 3 dead USB Block Erupters. I'm not sure if it is even worth shipping them, but if you want to pay shipping (from Ohio, US) I'll send them.
sr. member
Activity: 378
Merit: 250
December 16, 2013, 12:44:21 AM
#13
got a faulty avalon mini 2 module , didn't have time to look at what was burnt but definitely saw sparks and few seconds of fire lol. get a red led light afterwards. assuming is the board so chips are probably all fine let me know if you got a price in mind since I don't have much idea plus shipping , located currently in LA, California
What is a Avalon mini 2 module?
Is that the board that has 10 ASIC chips on it?



the mini was their last production along with some last remaining in stock 4 module were sold on their new avalon website below is the specs for the 2 module and the others.

2 modulars (160 ASICs), Hashrate:60GH/s, Chip:375MHz, 595W 65 GH/s Overclocked



3 modulars (240 ASICs), Hashrate:72GH/s, Chip:300MHz, 600W 85 GH/s Overclocked

4 modulars (320 ASICs), Hashrate:90GH/s, Chip:282MHz, 750W 110 GH/s Overclocked
I will offer .5BTC if you can send it out in the next few days.
hero member
Activity: 518
Merit: 500
December 15, 2013, 11:07:45 PM
#12
got a faulty avalon mini 2 module , didn't have time to look at what was burnt but definitely saw sparks and few seconds of fire lol. get a red led light afterwards. assuming is the board so chips are probably all fine let me know if you got a price in mind since I don't have much idea plus shipping , located currently in LA, California
What is a Avalon mini 2 module?
Is that the board that has 10 ASIC chips on it?



few seconds of fire. That doesn't sound good. Hard to say if any chips were affected until you have a working board again. Chips and fire don't really go together that well.
member
Activity: 99
Merit: 10
-All Investment Has its Risks and Rewards-
December 15, 2013, 10:09:43 PM
#11
got a faulty avalon mini 2 module , didn't have time to look at what was burnt but definitely saw sparks and few seconds of fire lol. get a red led light afterwards. assuming is the board so chips are probably all fine let me know if you got a price in mind since I don't have much idea plus shipping , located currently in LA, California
What is a Avalon mini 2 module?
Is that the board that has 10 ASIC chips on it?



the mini was their last production along with some last remaining in stock 4 module were sold on their new avalon website below is the specs for the 2 module and the others.

2 modulars (160 ASICs), Hashrate:60GH/s, Chip:375MHz, 595W 65 GH/s Overclocked



3 modulars (240 ASICs), Hashrate:72GH/s, Chip:300MHz, 600W 85 GH/s Overclocked

4 modulars (320 ASICs), Hashrate:90GH/s, Chip:282MHz, 750W 110 GH/s Overclocked
sr. member
Activity: 378
Merit: 250
December 15, 2013, 08:55:19 PM
#10
got a faulty avalon mini 2 module , didn't have time to look at what was burnt but definitely saw sparks and few seconds of fire lol. get a red led light afterwards. assuming is the board so chips are probably all fine let me know if you got a price in mind since I don't have much idea plus shipping , located currently in LA, California
What is a Avalon mini 2 module?
Is that the board that has 10 ASIC chips on it?

hero member
Activity: 518
Merit: 500
December 15, 2013, 08:47:45 PM
#9
I've got a faulty ASICMINER eruptor board. PM me if interested
Pages:
Jump to: