Topic: [WTB] Outdated Miners for Research - page 2. (Read 2150 times)
I have some Steamboat GB Klondike boards. I would be happy to let these go for free as long as you pay for shipping. I am in 60077
When I first got into mining I made a horrible mistake with buying the asic block erupter 30gh. it can be found here
http://www.amazon.com/ASICMiner-Block-Erupter-Cube-Miner/dp/B00H8K3MZU
Anyway I have that as well as a raspberries pi, cords and everything else you need to run it. What would you offer for that?
http://www.amazon.com/ASICMiner-Block-Erupter-Cube-Miner/dp/B00H8K3MZU
Anyway I have that as well as a raspberries pi, cords and everything else you need to run it. What would you offer for that?
Not sure what shipping will cost you to NC. I would offer around 10 for it.
When I first got into mining I made a horrible mistake with buying the asic block erupter 30gh. it can be found here
http://www.amazon.com/ASICMiner-Block-Erupter-Cube-Miner/dp/B00H8K3MZU
Anyway I have that as well as a raspberries pi, cords and everything else you need to run it. What would you offer for that?
http://www.amazon.com/ASICMiner-Block-Erupter-Cube-Miner/dp/B00H8K3MZU
Anyway I have that as well as a raspberries pi, cords and everything else you need to run it. What would you offer for that?
I have a S3+(450 GHs) for sale, are you interested in this miner
I guess have some decommissioned Chili boards from MrTeal (30Gh/s), if I still can find them .. let me look and I'll post again.
With MrTeal still around, I know you can obtain detailed instructions
With MrTeal still around, I know you can obtain detailed instructions
I would love to get one of these units if you were able to find them.
I guess have some decommissioned Chili boards from MrTeal (30Gh/s), if I still can find them .. let me look and I'll post again.
With MrTeal still around, I know you can obtain detailed instructions
With MrTeal still around, I know you can obtain detailed instructions
https://bitcointalksearch.org/topic/wtb-outdated-mining-hardware-eu-1022670
Link to a similar thread for Europe. If you don't want to deal with me in the US, help out Hamuki in EU. Thanks!
Link to a similar thread for Europe. If you don't want to deal with me in the US, help out Hamuki in EU. Thanks!
I have an Antiminer U3 that just stopped hashing last week after only 3 weeks of operation, might be perfect for your project (it's <50gh at factory volt/freq). When you plug in power the fan fires up, when you plug in the USB the USB power led comes on, when you start CGminer the mining led flashed on a few times, but then stays dark. The mining LED should come on and stay on, but it doesn't and cgminer never even recognizes that a device has been plugged in (but it will give an error when you unplug it, which I find strange).
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
If you want to ship this item to me I will pay the return shipping once it is fixed - if I can't fix it then I'll buy it from you.
Let me know if that sounds reasonable. I wasn't originally looking at a repair service but it's a fun idea.
Sounds good to me, pm me your shipping address and I'll drop it in the mail.
Great guy to work with and help learn this hardware. I sent him a broken U3 at my cost. He fixed it no charge, and I ended up selling it to him because I have 2 others and didn't really need it, it has a better home now. Great guy to deal with, very helpful, knows hardware!
Where are you located?
I have an Antiminer U3 that just stopped hashing last week after only 3 weeks of operation, might be perfect for your project (it's <50gh at factory volt/freq). When you plug in power the fan fires up, when you plug in the USB the USB power led comes on, when you start CGminer the mining led flashed on a few times, but then stays dark. The mining LED should come on and stay on, but it doesn't and cgminer never even recognizes that a device has been plugged in (but it will give an error when you unplug it, which I find strange).
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
If you want to ship this item to me I will pay the return shipping once it is fixed - if I can't fix it then I'll buy it from you.
Let me know if that sounds reasonable. I wasn't originally looking at a repair service but it's a fun idea.
Sounds good to me, pm me your shipping address and I'll drop it in the mail.
Done. Phillip and helipotte let me know what you'd like for your units.
Thanks all.
I have an Antiminer U3 that just stopped hashing last week after only 3 weeks of operation, might be perfect for your project (it's <50gh at factory volt/freq). When you plug in power the fan fires up, when you plug in the USB the USB power led comes on, when you start CGminer the mining led flashed on a few times, but then stays dark. The mining LED should come on and stay on, but it doesn't and cgminer never even recognizes that a device has been plugged in (but it will give an error when you unplug it, which I find strange).
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
If you want to ship this item to me I will pay the return shipping once it is fixed - if I can't fix it then I'll buy it from you.
Let me know if that sounds reasonable. I wasn't originally looking at a repair service but it's a fun idea.
Sounds good to me, pm me your shipping address and I'll drop it in the mail.
I have an Antiminer U3 that just stopped hashing last week after only 3 weeks of operation, might be perfect for your project (it's <50gh at factory volt/freq). When you plug in power the fan fires up, when you plug in the USB the USB power led comes on, when you start CGminer the mining led flashed on a few times, but then stays dark. The mining LED should come on and stay on, but it doesn't and cgminer never even recognizes that a device has been plugged in (but it will give an error when you unplug it, which I find strange).
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
If you want to ship this item to me I will pay the return shipping once it is fixed - if I can't fix it then I'll buy it from you.
Let me know if that sounds reasonable. I wasn't originally looking at a repair service but it's a fun idea.
I have an Antiminer U3 that just stopped hashing last week after only 3 weeks of operation, might be perfect for your project (it's <50gh at factory volt/freq). When you plug in power the fan fires up, when you plug in the USB the USB power led comes on, when you start CGminer the mining led flashed on a few times, but then stays dark. The mining LED should come on and stay on, but it doesn't and cgminer never even recognizes that a device has been plugged in (but it will give an error when you unplug it, which I find strange).
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
I was going to send it to Bitmain to see if they could repair it, but I'd rather give an independent guy a shot at it. Let me know what you think, I could sell it to you as is and then buy it back from you if you're able to fix it.
I could sell you 2 better quality usb sticks.
an ice fury uses a single bitfury chip and a dual fury uses 2 bit fury sticks. I am usa based.
I run them with bfg miner 4.4
the 1 chip clocks from 1.5 to 2.1
the 2 chip clocks from 3 to 3.8
they fit in a small flat rate
-pics removed-
an ice fury uses a single bitfury chip and a dual fury uses 2 bit fury sticks. I am usa based.
I run them with bfg miner 4.4
the 1 chip clocks from 1.5 to 2.1
the 2 chip clocks from 3 to 3.8
they fit in a small flat rate
-pics removed-
How much are you looking for? I feel like they aren't worth much but they would be fun to tinker with.
I could sell you 2 better quality usb sticks.
an ice fury uses a single bitfury chip and a dual fury uses 2 bit fury sticks. I am usa based.
I run them with bfg miner 4.4
the 1 chip clocks from 1.5 to 2.1
the 2 chip clocks from 3 to 3.8
they fit in a small flat rate
an ice fury uses a single bitfury chip and a dual fury uses 2 bit fury sticks. I am usa based.
I run them with bfg miner 4.4
the 1 chip clocks from 1.5 to 2.1
the 2 chip clocks from 3 to 3.8
they fit in a small flat rate
I got a old hashfast asic board that is mostly barebones so just the chip and board. I am not even sure if it works anymore.
This is the one you wanted $50 for right? I couldn't justify that price right now.
I have some 10Gh Asicminer blades. They are version 2. Also have some BFL jalapenos that hash at 8-9Gh. Bitfury stuff too. The Black arrow boards.
These are more along the lines of what I'm looking for. Are you willing to let go of all of them?
I have some 10Gh Asicminer blades. They are version 2. Also have some BFL jalapenos that hash at 8-9Gh. Bitfury stuff too. The Black arrow boards.
I got a old hashfast asic board that is mostly barebones so just the chip and board. I am not even sure if it works anymore.
Jump to: