Topic: [WTS] 25x X6500 Rev. 3 FPGA miners. CLEAN SETUP, FULLY FEATURED (Read 10478 times)
Dropped price to $400 or 34 BTC. Message me for other offers
September 27, 2012, 04:02:23 PM
is there a link somewhere with a how to?
http://tricone-mining.com
Latest from TheSeven: http://btcfpga.com/files/tml-1.11-mmq.jar
java -Dstatus_port=1234 -Drecent_history_len=18000000 -Dclock_pin=fgg484.K20 -Dclock_pin_freq=100 -Davoid_reprogramming=true -jar ./tml-1.11-mmq.jar x6500:SERIALNUMBER http://user:pass@host:port/
September 27, 2012, 03:55:07 PM
is there a link somewhere with a how to?
September 27, 2012, 03:53:32 PM
Updated original thread's hashrates since the TML bitstream was released and increases each board by about 75MH/s totaling to 475MH/s.
September 21, 2012, 08:26:43 PM
http://www.ebay.com/itm/130626750145?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
this is what i got.
this is what i got.
crap...too short...bonks i guess your not using the fans on the heat syncs? i should of went for taller...
Take the fans off of the heatsinks and put fans on the sides, like this: http://fpgamining.com/gallery/fizzisist
I guess you could repurpose the heatsink fans to make up most of the side fans if you have an abundance of zip-ties and the patience haha!
September 21, 2012, 09:15:17 AM
Just make them double high.
September 21, 2012, 08:13:41 AM
http://www.ebay.com/itm/130626750145?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
this is what i got.
this is what i got.
crap...too short...bonks i guess your not using the fans on the heat syncs? i should of went for taller...
September 15, 2012, 04:30:21 PM
Price lowered!
September 13, 2012, 12:37:21 AM
September 12, 2012, 11:57:12 PM
How many do you need?
I have some metal (and more expensive) ones that belong to Cognitive that I could sell. I bought them from the user tgmarks in March.
The added weight really helps with stability.
I have some metal (and more expensive) ones that belong to Cognitive that I could sell. I bought them from the user tgmarks in March.
The added weight really helps with stability.
September 12, 2012, 11:35:06 PM
next time we do it a different way... 
hey what size standoffs are you using? and where did you get those?
hey what size standoffs are you using? and where did you get those?
Darn, I should've gave you some. Sorry I wasn't thinking when I disassembled your boards.
I got them from amazon.com http://www.amazon.com/gp/product/B00137U44Q/
September 12, 2012, 01:46:41 PM
2 inches, saw in your other thread,
September 12, 2012, 01:24:48 PM
next time we do it a different way...
hey what size standoffs are you using? and where did you get those?
hey what size standoffs are you using? and where did you get those?
September 12, 2012, 01:15:33 PM
Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific.
Hey I just shipped 2 to max in montreal via USPS Express mail. It was $45 with insurance to Quebec.
Just received them today, paid 160 in taxes...sigh...
hashing away as we speak. Thanks BONKS!
Glad they got there promptly!
But taxes? I specified them as gifts :/
September 12, 2012, 01:09:00 PM
Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific.
Hey I just shipped 2 to max in montreal via USPS Express mail. It was $45 with insurance to Quebec.
Just received them today, paid 160 in taxes...sigh...
hashing away as we speak. Thanks BONKS!
September 12, 2012, 11:40:21 AM
+1
Bonks has them in stock. No need to wait for weeks to get your own FPGA mining gear.
Bonks has them in stock. No need to wait for weeks to get your own FPGA mining gear.
September 08, 2012, 05:05:12 PM
+1
not that mine counts for much but Bonks is a straight up guy
not that mine counts for much but Bonks is a straight up guy
September 08, 2012, 03:12:06 PM
Looks like I'm a little late but +1 for bonks' reputability.
Thanks Garr I kinda needed it for the forums.
Link to my OTC ratings are in the original post for those wondering.
September 08, 2012, 03:07:26 PM
Looks like I'm a little late but +1 for bonks' reputability.
September 07, 2012, 11:34:09 PM
Can you tell me roughly how much it would cost to ship to Canada - the province of Ontario to be specific.
Hey I just shipped 2 to max in montreal via USPS Express mail. It was $45 with insurance to Quebec.
Ah ok. Thanks for the info. I'm thinking I will pass on this deal and get the new ASIC board from cablepair.
Jump to: